Correction: Deng, F., et al. A CMOS Humidity Sensor for Passive RFID Sensing Applications. Sensors 2014, 14, 8728–8739

Fangming Deng; Yigang He; Chaolong Zhang; Wei Feng

doi:10.3390/s140713171

,

and

¹

School of Electrical Engineering and Automation, Hefei University of Technology, Hefei 230009, China

²

School of Electrical and Electronic Engineering, East China JiaoTong University, Nanchang 330013, China

^*

Author to whom correspondence should be addressed.

Sensors2014, 14(7), 13171-13172;https://doi.org/10.3390/s140713171

This article belongs to the Special Issue Polymeric Micro Sensors and Actuators

Version Notes

Order Reprints

The authors wish to make the following corrections to this paper [1]. Figures 2, 3 and 4b were adapted from reference [2]. The corrected Figure 7 should be,

Figure 7. Measured outputs for different ΔC_sensor of the sensor with 2 μm-thick polyimide layer at 25 °C.

The authors would like to apologize for any inconvenience caused to the readers by these changes.

References

Deng, F.; He, Y.; Zhang, C.; Feng, W. A CMOS Humidity Sensor for Passive RFID Sensing Applications. Sensors 2014, 14, 8728–8739. [Google Scholar]
Shulaker, M.M.; Rethy, J.V.; Hills, G.; Wei, H.; Chen, H.Y.; Gielen, G.; Wong, H.S.P.; Mitra, S. Sensor-to-digital interface built entirely with carbon nanotube FETs. IEEE J. Solid State Circuits 2014, 49, 190–201. [Google Scholar]

© 2014 by the authors; licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution license ( http://creativecommons.org/licenses/by/3.0/).

Correction: Deng, F., et al. A CMOS Humidity Sensor for Passive RFID Sensing Applications. Sensors 2014, 14, 8728–8739

References

Article Metrics

Citations

Article Access Statistics