Next Article in Journal
The Role of Natural Products in Drug Discovery and Development against Neglected Tropical Diseases
Next Article in Special Issue
An Efficient Synthesis of Novel Bioactive Thiazolyl-Phthalazinediones under Ultrasound Irradiation
Previous Article in Journal
Hydrogen Sulfide in the Adipose Tissue—Physiology, Pathology and a Target for Pharmacotherapy
Previous Article in Special Issue
New Thiazolyl-triazole Schiff Bases: Synthesis and Evaluation of the Anti-Candida Potential
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
Molecules
Volume 22
Issue 1
10.3390/molecules22010064
molecules-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles thumb_up
...
Endorse textsms
...
Comment
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Synthesis and Antibacterial Evaluation of New Sulfone Derivatives Containing 2-Aroxymethyl-1,3,4-Oxadiazole/Thiadiazole Moiety

by
Shihu Su
1,2,
Xia Zhou
1,*,
Guoping Liao
1,
Puying Qi
1 and
Linhong Jin
1,*
1
State Key Laboratory Breeding Base of Green Pesticide and Agricultural Bioengineering, Key Laboratory of Green Pesticide and Agricultural Bioengineering, Ministry of Education, Research and Development Center for Fine Chemicals, Guizhou University, Guiyang 550025, China
2
Zunyi Agricultural Products Quality and Safety Inspection and Testing Center, Room 698, Shanghai Road, Huichuan District, Zunyi 563000, Guizhou, China
*
Authors to whom correspondence should be addressed.
Molecules 2017, 22(1), 64; https://doi.org/10.3390/molecules22010064
Submission received: 21 November 2016 / Revised: 22 December 2016 / Accepted: 27 December 2016 / Published: 31 December 2016
(This article belongs to the Special Issue Sulfur-Nitrogen Heteroaromatics)
Browse Figures
Versions Notes

Abstract

:
Sulfones are one of the most important classes of agricultural fungicides. To discover new lead compounds with high antibacterial activity, a series of new sulfone derivatives were designed and synthesized by introducing the aroxymethyl moiety into the scaffold of 1,3,4-oxadiazole/thiadiazole sulfones. Antibacterial activities against three phytopathogens (Xanthomonas oryzae pv. oryzae, Ralstonia solanacearum, Xanthomonas axonopodis pv. citri.) were assayed in vitro. As compared to the control of commercial fungicides and some reported sulfone fungicides, seven compounds 5I-1–5I-7 exerted remarkably higher activities with EC50 values ranging from 0.45–1.86 μg/mL against X. oryzae and 1.97–20.15 μg/mL against R. solanacearum. Exhilaratingly, 5I-1, 5I-2 and 5I-4 displayed significant in vivo activity against X. oryzae with protective effect of 90.4%, 77.7%, and 81.1% at 200 μg/mL, respectively, much higher than that exhibited by Bismerthiazol (25.6%) and Thiadiazole-copper (32.0%). And the differential phytotoxicity of active derivatives was preliminarily checked. The results demonstrated that derivative of 2-aroxymethyl-1,3,4-oxadiazole/thiadiazole sulfone can serve as potential alternative bactericides for the management of plant bacterial diseases.

1. Introduction

Xanthomonas, a large genus of gram-negative plant-associated bacteria, causes important diseases such as bacterial blight of rice by Xanthomonas oryzae pv. Oryzae (X. oryzae) and citrus canker by Xanthomonas axonopodis pv. citri. (X. axonopodis) leading to serious quality and yield losses in the host crop [1]. Ralstonia solanacearum (R. solanacearum), a soil-borne bacterium, is responsible for bacterial wilt on more than 200 plant species including important crops such as potato, tomato, tobacco and banana [2,3]. Controlling those pathogens with bactericides such as copper based bactericides serves as the most effective way to cure plant disease [4,5]. However, the application of many currently available antibacterial agents is compromised by their low efficiency, phytotoxic effect and high accumulation in the soil [6,7]. For example, Bismerthiazol, one of the major bactericides for the control of rice bacterial leaf blight, only shows the control efficiency of 25.49% at a high dosage of 200 μg/mL [8]. Furthermore, the emergence of bactericide resistance [9,10] coupled with above drawbacks has led to the rising need for development of high-efficient bactericides to effectively control those agricultural diseases.
Extensive biochemical studies on sulfone derivatives bearing suitably substituted heterocyclic units have confirmed that those molecular building blocks, as a common pharmacophore model are effective against various phytopathogens in agriculture [11,12,13]. In this regard, many bactericidal agents based on heterocyclic sulfones have been patented and employed for crop protection [4,12,13,14,15,16]. For example, 1,3,4-oxadiazole/thiadiazole bearing sulfone derivatives showed potent antibacterial activities against X. oryzae and R. solanacearum [4]. We have sought new synthetic compounds related to phenyl/benzyl substituted 1,3,4-oxadiazole sulfone that have similar antibacterial action [4,15,16]. Quite interestingly, it was demonstrated that replacement of phenyl group with benzyl fragment at the 2-position of the 1,3,4-oxadiazole/thiadiazole unit (Figure 1) could significantly enhance the flexibility of the molecular backbone to combine with the receptor protein of pathogenic bacteria [14,15]. Another evidence indicated that the incorporation of an aroxymethyl group to the heterocyclic component can serve as an effective approach for enhancing antibacterial activity [17]. Intriguingly, in the course of structure optimization, the modifying of the oxime ether pharmacophore (strobilurins) with a phenoxymethyl side chain lead to the successful landing of Kresoxim-methy [18]. Fascinated by these investigations, herein we explored to build the heterocyclically substituted sulfones incorporating an aroxymethyl fragment with -O-attached to the heterocycle through linker (-CH2-). The design strategy and synthetic route are schematically depicted in Figure 1 and Figure 2 respectively. In our synthetic design, the aroxymethyl group involved is typical and expected to play an important role in increasing bioactivity. The inhibitory activity of target compounds on growth of various important pathogenic bacteria in vitro and in infected rice were investigated and their structure-activity relationships (SARs) were discussed. Phytotoxicity in tobacco leaves and rice seed were also determined.

2. Results and Discussion

2.1. Chemistry

Compounds 5I and 5II were prepared by analogous processes [17,19,20], as presented in Figure 2. Starting from phenol or substituted phenol, the key intermediate 2-aroxymethyl-1,3,4-oxadiazole-2-thiol 3 was synthesized in four steps involving esterification [17], hydrazidation, salt formation, and cyclization [19]. Subsequently, thiol 3 was converted into its corresponding thioether derivative 4 by thioetherification with dimethyl/diethyl sulfate or benzyl bromide. Finally, the target sulfonyl oxadiazole/thiadiazole 5I/II was obtained through oxidation of the thioether 4 with potassium permanganate [20]. The structures of all the target compounds were characterized by elemental analyses, and 1H, 13C NMR and MS(ESI).

2.2. In Vitro Antibacterial Activity

The antibacterial activities of all the compounds were evaluated in vitro against X. oryzae, R. solanacearum and X. axonopodis via the turbidimeter test [21]. To make a judgment on the bactericidal potency of the synthesized compounds, three commercial antibacterials, Bismerthiazol, Kocide 3000 and Thiodiazole-copper were selected as the positive controls. As shown in Table 1, most of the products 5I exhibited better or equivalent antibacterial activities compared to positive controls against the tested plant bacteria. Among them, compounds 5I-1–5I-7 appeared highly active for X. oryzae and R. solanacearum with an observed control efficacy of 100% both at 200 and 100 μg/mL. Interestingly, 5I-1–5I-7 exhibited inhibition rates of 65%–100% at 200 μg/mL and 48%–90% at 100 μg/mL against X. axonopodis which were also superior to that of positive controls. On the other hand, the present synthesis and bioactive tests were parallel conducted on 5II. While no anticipated bioactivity was observed, except 5II-1, 5II-2 showed better activities than positive controls against X. oryzae with inhibition rates of 84%–99% at 200 μg/mL. It was thus confirmed that compounds 5I bearing 1,3,4-oxidiazole moiety were more potent in combating tested bacteria and displayed significantly higher activity as compared to compounds 5II and positive controls.
The compounds acting better than positive controls (Table 1) were further performed for dose response with lower gradient concentration for their EC50 values (Table 2). Compounds 5I-1–5I-7 revealed outstanding activity against X. oryzae with EC50 values of 0.45, 1.44, 1.67, 0.72, 1.67, 1.86, 0.52 μg/mL respectively, which are about 1/50–1/200 fraction lower than 96.2 μg/mL displayed by Bismerthiazol. Meanwhile their EC50 (1.97–20.51 μg/mL) values against R. solanacearum, were shown to be much lower compared to the figure 45.91 μg/mL displayed by Kocide 3000. Additionally, 5I-1–5I-7 inhibited the growth of X. axonopodis with EC50 values ranging from 24.89 to 96.83 μg/mL. Although they were not as effective to the other two type of bacteria, but still superior to Bismerthiazol (119.5 μg/mL). More over 5I-3 is the most active against X. axonopodis.
In particular, 5I-1 bearing 4-F substituted phenoxymethyl, acted best for combating X. oryzae and R. solanacearum with EC50 values of 0.45 and 1.97 μg/mL respectively, which were far better than three commercial positive controls. Besides, the compounds 5I-2, 5I-4, 5I-7 with EC50 values of 1.44, 0.72, 0.52 μg/mL against X. oryzae and 13.42, 20.51, 7.75 μg/mL against R. solanacearum, respectively, appeared to be promising bactericides against plant bacterial diseases.

2.3. In Vivo Antibacterial Activity

Having established outstanding bactericidal activity of 5I-1, 5I-2, 5I-4 in vitro, we further explored their antibacterial potency in vivo against rice bacterial leaf blight via the leaf-cutting method [22,23] under greenhouse condition at a concentration of 200 μg/mL. Bismerthiazol and Thiodiazole-copper served as positive controls for this investigation. It was observed that all inoculated plants in 14 days exhibited blight symptoms with 100% morbidity. Plants for blank control (no bacteria inoculations) appeared absence of bacterial infection throughout the testing time. The plants for negative control (inoculated but treated with no compounds) showed severe bacterial blight symptoms with about 20.0 cm long and spreading blight lesions. While the plants treated with tested compounds were relatively healthy and had obvious shorter lesions ranged from1.9 to 4.9 cm. 5I-1 afforded a maximum of lesion reduction. It can be seen (Table 3) that, comparing to the untreated control, 5I-1, 5I-2 and 5I-4 reduced bacterial leaf blight incidence by 90.4%, 77.7% and 81.1% respectively, which were superior to that of Bismerthiazol (25.6%) and Thiodiazole-copper (32.0%).

2.4. Structure-Activity Relationship (SAR) Analyses

On the basis of the activity values shown in Table 1 and Table 2, a preliminary conclusion of the structure-activity relationship could be deduced. First, the antibacterial studies with both series compounds against tested bacteria revealed that compounds 5I displayed significantly higher antibacterial activity than the corresponding 1,3,4-thiadiazole 5II. Apparently the presence of heterocyclic unit 1,3,4-oxadiazole was critical to achieve significant inhibitory effect. Thus, for example, 1,3,4-oxadiazole sulfones 5I-1–5I-7 may serve as more potent source of antibacterial compounds compared to their corresponding 1,3,4-thiadiazole derivatives 5II. The difference may lie in that the oxygen atom in oxadiazole is more electronegative but less bulky than sulfur atom in thiadiazole which causing different interaction with the surrounding residues. However, the strategy of oxygen–sulfur bioisosterism substitution may not necessarily lead to one way enhancement of structure bioactivity. For example, a similar trend was documented that presence of 1,3,4-oxadiazole moiety is more potential than 1,3,4-thiadiazole in imparting the antifungal activity [13]. While 1,3,4-thiadiazol-2(3H)-ones displayed much higher inhibition activity than the corresponding 1,3,4-oxadiazol-2(3H)-ones as human protoporphyrinogen oxidase inhibitors [24,25].
Further antibacterial tests on X. oryzae and R. solanacearum, have revealed that 4-substituted mono halogenated phenoxymethyl derivatives (R1 = 4-Cl, 4-F, 4-Br) exhibited significant antibacterial activity which appears to decrease with increase in the size of the halogen substituent. Thus the order follows the trend 5I-1(F) > 5I-2(Cl) > 5I-3(Br) indicating that 4-F substituted derivative is most favorable in imparting antibacterial activity. At this point, it is in line with the previous report [13,15] that bulky groups are normally disfavored in similar structures. In addition, introduction of stronger electron-withdrawing substituents (F > Cl > Br) in the para-position of the benzene ring might assist in enhancing antibacterial activity. Specifically, when compound 5I-6(R1 = H) was concerned, it is not bound to be the most potent among the 4-halogenated compounds with taking account the above two factors.
With regard to the nature of R2 substituent attached to the sulfonyl unit, similar trend in terms of activity was noted with increase in size of the alkyl group:CH3 > CH2CH3 > CH2Ph, which means that methyl-sulfonyl derivatives are most active. The ethyl-sulfonyl bearing oxadiazole showed potent antibacterial activity, close to but slightly lower than the corresponding methylated one. Whereas incorporation of relatively bulky benzyl group in the sulfonyl unit led to dramatic reduction of antibacterial activity. This trend has been amply demonstrated in the observed decreasing order of activity with two different series of halogen substituents e.g., 5I-1 > 5I-7 > 5I-9(R1 = F) and 5I-4 > 5I-8 > 5I-12(R1 = 2,4-di Cl). A similar decreasing behavior of activity with growing size of alkyl group attached to the sulfonyl unit was also observed with 5II series of compounds wherein oxadiazole moiety is replaced by thiadiazole skeleton.
Finally when the results are compared with those of previously reported sulfone analogs (Table 4), where the positive controls were same and acted in identical level [4,14,15,16], compound 5I-1 provides an ideal example of being associated with exceptionally high activity against X. oryzae (0.45 μg/mL) and R. solanacearum (1.67 μg/mL). In this regard, 2-(4-fluorophenoxymethyl)-5-(methylsulfonyl)-1,3,4-oxadiazole (5I-1) is even more potent than the previously reported fungicides such as 2-(4-fluorophenzyl)-5-(methylsulfonyl)-1,3,4-oxadiazole [16] and 2-(4-fluorobenzyl)-5-(methylsulfonyl)-1,3,4-oxadiazole [15]. It worth to note that when the molecular weights are considered, the same mass concentration means lower molar concentration, for the present new compounds possess the higher molecular weight with an -O-, or OCH2 group added. Similar bioactive trend could be observed on 5I-2(4-Cl) or 5I-4(2,4-di Cl) with their corresponding analog bearing 2-(4-chlorophenyl) or 2-(2,4-dichlorobenyl) substituent on heterocyclic side chain. It can be further derived from earlier reported data and our present investigation (Table 4) that the nature of 2-substituent in the 1,3,4-oxadiazole ring also plays a significant role in the design of final desired structure. The antibacterial activity with 2-substituents appears to follow the trend: phenyl < benzyl < phenoxymethyl. The fact that the presence of substituted phenoxymethyl substituent at the 2-position of 1,3,4-oxadiazole moiety helps to enhance biological activity may be attributed to the improved structural flexibility offered by sp3-hybridized methylene (-CH2-), which helps to combine the receptor protein of pathogenic bacteria [15]. Furthermore, in accordance with the prediction put forward by CoMSIA 3D-QSAR, hydrogen-bond interaction offered by the oxygen atom of the alkyl aryl ether in the designated region in between phenyl and heteroalkyl group could be responsible for the enhanced bioactivity [14]. At the same time the electron withdrawing ability of the aroxymethyl group makes the compound more potent by reducing electron density on the heterocyclic system and increasing structure flexibility and stability.

2.5. Phytotoxic Activity

We preliminarily assessed the possible toxicity of 5I-1, 5I-2, 5I-4 on rice germination and tobacco leaf inoculation [27,28].
Initially, phytotoxic activity on tobacco leaves was assessed by infiltrating 50 μL of a 50, 100, 200 and 300 μM solution of each compound into the mesophylls of the leaves. Bismerthiazol was also included for comparison purposes, and as a reference control. After 4-day of innoculation, a brown necrotic area of around 0–0.3 cm diameter was observed (Figure 3). It appeared s no obvious difference among the inoculation spots. 5I-1, 5I-2, 5I-4 and Bismerthiazol appeared no or negligible phytotoxic effect on tobacco plant, with a necrosis between 0.2–0.3 cm at 300 μM concentration. And there’s no dose-response effect with a clear phytotoxicity increase from 50 to 300 μM for all treatment.
Further assays were carried out with rice germination test. Phytotoxic effects were quantified through shoot lengths of seedlings grown in the presence of decreasing concentrations of compounds (Table 5). Toxic effects were dose dependent. The high concentrations (300 μM) of all chemicals severely affected seedling development (Figure 4). 5I-1, 5I-2 and 5I-4 were divergent on the phenotypic effects. Remarkably, 5I-4 severely inhibited both root growth and shoot development even at the lowest concentration 1 μM. 5I-2 predominantly inhibited root growth while allowing moderate shoot development. While, 5I-1, barely effected root growth or inhibited shoot development at concentration 1–100 μM, similar to the appearance caused by Bismerthiazol. However, for the target synthetic compounds, phytotoxicity was only observed at concentrations many times higher than their bactericidal EC50 in terms of molar. While Bismerthiazol showed the phytotoxicity on 300 μM, which is around same level as bactericidal EC50 119 μg/mL (about 333 μM).

3. Experimental

3.1. Chemicals and Instruments

All the reagents and solvents were purchased from Aladdin (Shanghai, China) and used without further purification. The progress of the reactions and purity of compounds were assessed by thin-layer chromatography (TLC) with GF254 silica-gel precoated sheets (Merck KGaA, Darmstadt, Germany) using hexane/ethyl acetate as eluent; the melting points of the products were determined on an XT-4 binocular microscope (Beijing Tech Instrument Co., Beijing, China). 1H and 13C NMR (solvent CDCl3 or DMSO-d6) spectral studies were conducted on a JEOL-ECX 500 NMR spectrometer (JEOL, Tokyo, Japan) using TMS as internal standard. Elemental analysis was performed on an Elemental Vario-III CHN analyzer (Elementar Analysensysteme GmbH, Hanau, Germany). Mass spectral studies were conducted on an Agilent LC/MSD Trap VL (Agilent, Santa Clara, CA, USA) mass spectrometer.

3.2. General Synthetic Procedure for the Target Compounds 5I and 5II

The synthetic route to target compounds is shown in Figure 2 which has been designed partly based on previously reported methods [18,19,20].

3.2.1. Synthesis of Substituted Phenoxyacetohydrazide (2) as Intermediate

To an oven-dried round bottomed flask with a stirring bar was added a solution of substituted phenol (0.01 mol, 1 eq.) and K2CO3 (1.2 eq.) in 50 mL of dry DMF. Excess ethyl chloroacetate dissolved in 10 mL of DMF was then slowly added through a dropping funnel to the above solution. The resulting mixture was stirred at 90 °C for 5–6 h. The reaction was quenched with saturated NaCl solution, then extracted with dichloromethane(DCM), washed with brine, dried over MgSO4 and then concentrated on a rotary evaporator affording methyl 2-phenoxyacetate 1 (80%–95% yield) which was used for the next step without further purification [17].This product 1 (0.009 mol, 1 eq.) was dissolved in 30 mL of ethanol and then placed in a round-bottomed flask equipped with a stirring bar; 80% of hydrazine hydrate (0.018 mol, 2 eq.) was slowly added to this mixture at room temperature through a dropping funnel. The resulting solution was heated up to reflux temperature and stirring was continued under this condition for another 6 h. The reaction mixture was filtered through celite, the filtrate was washed with brine, dried over MgSO4, and then concentrated in vacuo. The crude phenoxyacetohydrazide 2 was used directly without further purification in the next step.

3.2.2. Synthesis of the Key Intermediate 2-Thiol-5-Substituted-1,3,4-Oxadiazole/Thiadiazole (3)

For X=O (3I), to a 100 mL three necked rounded-bottomed flask was added a solution of intermediate 2 (0.009 mol, 1 eq.) and KOH (0.0108 mol, 1.2 eq.) in 50 mL absolute ethanol. This mixture was first digested and then a diluted solution carbon disulfide (0.0108 mol, 1.2 eq) in 10 mL of absolute ethanol was slowly added. The resulting mixture was stirred for 1–2 h and then refluxed at 80 °C till a homogeneous solution was obtained [19]. The alcohol was removed under reduced pressure on a rotary evaporator. The solution was washed with added brine followed by treatment with dilute hydrochloric acid solution. The pH was adjusted to 5–6 when a precipitate appeared which was subsequently filtered to afford a white solid 5-(phenoxymethyl)-1,3,4-oxadiazole-2-thiol (3I) (yield 60%–75%).
For X=S (3II), to a 100 mL three necked rounded-bottomed flask was added a solution of intermediate 2 (0.009 mol, 1 eq.), and KOH (0.0108 mol, 1.2 eq.) in 50 mL of absolute ethanol. This mixture was first digested and then a diluted solution carbon disulfide (0.0108 mol, 1.2 eq) in 10 mL of absolute ethanol was slowly added. The resulting mixture was stirred for 5–6 h and then filtered through celite. The filtrate was concentrated in vacuo. The crude potassium 2-(2-phenoxyacetyl) hydrazinecarbodithioate (2–3) was washed with absolute ethanol alcohol and used directly in the next step for the preparation of 3II. 2–3(0.01 mol) was crushed into small powder and then slowly added to 50 mL H2SO4 (98%). An exothermic reaction ensued, the solution was stirred on an ice salt bath for 2 h, and the temperature was kept temperature below 5 °C in order to control the violence of the reaction. The progress of the reaction was monitored by TLC; the reaction was quenched by adding crushed ice equivalent to 200 mL of water. A white precipitate appeared which was filtered and then washed with water. The solid was subsequently dissolved in 10% NaOH solution and filtered again. The filtrate was then acidified with hydrochloric acid (HCl) to afford a white solid which was filtered to obtain the desired 5-(phenoxymethyl)-1,3,4-thiadiazole-2-thiol 3II.

3.2.3. Synthesis of the Intermediate 2-Thiol-5-Substituted-1,3,4-Oxadiazole/Thiadiazole (4)

To a solution of 2-thiol-5-substituted-1, 3, 4-oxadiazole/thiadiazole 3 (2 mmol) and sodium hydroxide (2.4 mmol, 1.2 eq.) in water (10 mL), dimethyl sulfate/diethyl sulfate (2.4 mmol, 1.2 eq.) was added drop wise with constant stirring at room temperature. The reaction was monitored for its completion by thin layer chromatography (TLC), quenched with saturated NaCl solution, then extracted with dichloromethane (3 × 20 mL). The solvent layer was washed with brine, dried over Na2SO4 and then concentrated on a rotary evaporator affording a yellow oil, 2-thiol-5-substituted-1, 3, 4-oxadiazole/ thiadiazole (4) (70%–80% yield).

3.2.4. Synthetic Procedure for the Target Compounds 5

A 50 mL three-neck round-bottom flask equipped with a magnetic stirrer was charged with intermediate 4 and glacial acetic acid (15 mL). The mixture was stirred for 10 min and then 7% potassium permanganate (KMnO4, 5 mmol) solution was slowly added with string at room temperature [20]. After the completion of the reaction (assessed by TLC), 10% sodium bisulfite (NaHSO3) solution was added to deoxidize the residual KMnO4. The reaction mixture were subsequently filtered and the solid obtained was washed with distilled water, dried under vacuum, and recrystallized from ethanol to give compounds 5.
2-(4-Fluorophenoxymethyl)-5-(methylsulfonyl)-1,3,4-oxadiazole (5I-1). White acicular crystal; m.p.: 108–110 °C; 1H-NMR (500 MHz, CDCl3) 3.50 (s, 3H), 5.32 (s, 2H), 7.12–6.89 (m, 4H); 13C-NMR (CDCl3, 125 MHz) δ: 42.2, 61.6, 112.7 (d, J = 46.1 Hz), 116.2, 116.4 (d, J = 1.9 Hz), 116.5, 120.0 (d, J = 1.0 Hz), 155.5 (d, J = 468.7 Hz), 173.8, 178.9; Anal. calcd. for C10H9FN2O4S: C, 44.12; H, 3.33; N, 10.29; found: C, 43.51; H, 3.53; N, 10.33. MS (ESI) (m/z): 273.2/[M + H]+.
2-((4-Chlorophenoxy)methyl)-5-(methylsulfonyl)-1,3,4-oxadiazole (5I-2). White solid; m.p.: 113–114 °C; 1H-NMR (500 MHz, CDCl3) δ 7.50–7.40 (m, 2H, Ar-H), 6.96–6.87 (m, 2H, Ar-H), 5.33 (s, 2H, -CH2-), 3.50 (s, 3H, -CH3); 13C-NMR (125 MHz, CDCl3) δ 164.3, 163.5, 156.3, 132.8, 116.7, 115.3, 59.9, 43.0; Anal. calcd. for C10H9ClN2O4S: C, 36.23; H, 3.21; N, 8.42. Found: C, 36.05; H, 2.72; N, 8.41; MS (ESI) (m/z): 357.2/[M + Na]+.
2-((4-Bromophenoxy)methyl)-5-(methylsulfonyl)-1,3,4-oxadiazole (5I-3). White solid; m.p.: 97–99 °C; 1H-NMR (500 MHz, CDCl3) δ 7.30 (ddd, J = 8.8, 5.8, 2.9 Hz, 2H, Ar-H), 6.98–6.90 (m, 2H, Ar-H), 5.52 (s, 2H, -CH2-), 3.48 (s, 3H, -CH3); 13C-NMR (125 MHz, CDCl3) δ 172.5, 170.1, 155.6, 129.95, 129.9, 127.9, 116.2, 116.2, 65.1, 43.1; Anal. calcd. for C10H9BrN2O4S: C, 41.50; H, 3.71; N, 9.71. Found: C, 41.60; H, 3.14; N, 9.70; MS (ESI) (m/z): 311.2/[M + Na]+.
2-((2,4-Dichlorophenoxy)methyl)-5-(methylsulfonyl)-1,3,4-oxadiazole (5I-4). White solid; m.p.: 123–124 °C; 1H-NMR (500 MHz, CDCl3) δ 7.42 (d, J = 2.5 Hz, 1H, Ar-H), 7.25–7.22 (m, 1H, Ar-H), 7.05 (d, J = 8.8 Hz, 1H, Ar-H), 5.39 (s, 2H, -CH2-), 3.50 (s, 3H, -CH3); 13C-NMR (125 MHz, CDCl3) δ 163.9, 163.6, 151.8, 130.8, 128.8, 128.1, 125.2, 116.4, 61.5, 43.0; Anal. calcd. for C10H8Cl2N2O4S: C, 37.54; H, 2.96; N, 8.97. Found: C, 37.17; H, 2.50; N, 8.67; MS (ESI) (m/z): 323.3/[M + H]+.
2-((4-Chloro-2-methylphenoxy)methyl)-5-(methylsulfonyl)-1,3,4-oxadiazole (5I-5). White solid; m.p.: 96–98 °C; 1H-NMR (500 MHz, CDCl3) δ 7.17 (d, J = 2.5 Hz, 1H, Ar-H), 7.14 (dd, J = 8.6, 2.6 Hz, 1H, Ar-H), 6.86 (d, J = 8.6 Hz, 1H, Ar-H), 5.34 (s, 2H, -CH2-), 3.50 (s, 3H, -CH3), 2.23 (s, 3H, Ar-CH3); 13C-NMR (125 MHz, CDCl3) δ 164.6, 163.4, 154.1, 131.2, 129.6, 127.5, 126.7, 112.9, 60.3, 43.0, 16.1; Anal. calcd. for C11H11ClN2O4S: C, 43.91; H, 3.72; N, 9.35. Found: C, 43.64; H, 3.66; N, 9.25; MS (ESI) (m/z): 325.2/[M + Na]+.
2-(Methylsulfonyl)-5-(phenoxymethyl)-1,3,4-oxadiazole (5I-6). White solid; m.p.: 66–67 °C; 1H-NMR (500 MHz, CDCl3) δ: 7.37–7.29 (m, 2H, Ar-H), 7.05 (t, J = 7.4 Hz, 1H, Ar-H), 7.00–6.97 (m, 2H, Ar-H), 4.94 (s, 2H, -CH2-), 3.46 (s, 3H, -CH3); 13C-NMR (125 MHz, CDCl3) δ: 157.4, 154.8, 153.7, 129.8, 122.5, 115.0, 60.7, 49.0; Anal. calcd. for C10H10N2O4S: C, 47.51; H, 4.33; N, 11.33. Found: C, 47.24; H, 3.96; N, 11.02; MS (ESI) (m/z): 277.3/[M + Na]+.
2-(Ethylsulfonyl)-5-((4-fluorophenoxy)methyl)-1,3,4-oxadiazole (5I-7). White solid; m.p.: 106–108 °C; 1H-NMR (500 MHz, CDCl3) δ 7.12–6.90 (m, 4H), 5.32 (s, 2H), 3.58 (q, J = 7.4 Hz, 2H), 1.51 (t, J = 7.4 Hz, 3H); 13C-NMR (125 MHz, CDCl3) δ164.6, 162.7, 153.4, 116.6, 116.5, 116.4, 116.4, 115.9, 60.6, 50.2, 6.9; Anal. calcd. for C11H11FN2O4S: C, 46.15; H, 3.87; N, 9.79. Found: C, 45.35; H, 3.84; N, 9.85; MS (ESI) (m/z): 309.3/[M + Na]+.
2-((2,4-Dichlorophenoxy)methyl)-5-(ethylsulfonyl)-1,3,4-oxadiazole (5I-8). White solid; m.p.: 88–89 °C; 1H-NMR (500 MHz, DMSO-d6) δ 7.62 (d, J = 2.5 Hz, 1H, Ar-H), 7.39 (dt, J = 21.6, 5.7 Hz, 2H, Ar-H), 5.66 (s, 2H, -CH2-), 3.74 (q, J = 7.3 Hz, 2H, -CH2CH3), 1.26 (t, J = 7.3 Hz, 3H, -CH3); 13C-NMR (125 MHz, DMSO-d6) δ 164.6, 161.9, 151.7, 129.6, 128.2, 126.3, 122.9, 116.4, 61.1, 49.5, 6.6; Anal. calcd. for C11H10Cl2N2O4S: C, 39.49; H, 3.48; N, 8.65. Found: C, 39.18; H, 2.99; N, 8.31; MS (ESI) (m/z): 359.1/[M + Na]+.
2-(Benzylsulfonyl)-5-((4-fluorophenoxy)methyl)-1,3,4-oxadiazole (5I-9). White sold; m.p.: 94–96 °C; 1H-NMR (CDCl3, 500 MHz) δ 7.42–7.23 (m, 5H), 7.06–6.88 (m, 4H), 5.21 (s, 4H), 4.75 (s, 4H); 13C-NMR (CDCl3, 125 MHz) δ 164.7, 162.6, 158.4 (d, J = 240.9 Hz), 153.3, 131.2, 130.0, 129.3, 124.6, 116.5, 116.3 (t, J = 4.1 Hz), 62.1, 60.4; Anal. calcd. for C16H13FN2O4S: C, 55.17; H, 3.76; N, 8.04. Found: C, 55.17; H, 3.66; N, 8.29; MS (ESI) (m/z): 371.1/[M + Na]+.
2-(Benzylsulfonyl)-5-((4-chlorophenoxy)methyl)-1,3,4-oxadiazole (5I-10). White solid; m.p.: 126–128 °C; 1H-NMR (500 MHz, CDCl3) δ 7.38–7.26 (m, 7H, Ar-H), 6.95–6.85 (m, 2H, Ar-H), 5.23 (s, 2H, -CH2-), 4.75 (s, 2H, -CH2-); 13C-NMR (125 MHz, CDCl3) δ 164.5, 162.6, 155.7, 131.2, 130.0, 129.9, 129.3, 127.8, 124.5, 116.2, 62.1, 59.8; Anal. calcd. for C16H13ClN2O4S: C, 52.27; H, 4.13; N, 7.61. Found: C, 52.68; H, 3.59; N, 7.68; MS (ESI)(m/z): 387.2/[M + Na]+.
2-(Benzylsulfonyl)-5-((4-bromophenoxy)methyl)-1,3,4-oxadiazole (5I-11). White solid; m.p.: 142–143 °C; 1H-NMR (500 MHz, CDCl3) δ 7.57–7.47 (m, 2H, Ar-H), 7.42–7.23 (m, 5H, Ar-H), 7.10–7.01 (m, 2H, Ar-H), 5.55 (s, 2H, -CH2-), 5.20 (s, 2H, -CH2-); 13C-NMR (125 MHz, CDCl3) δ 164.4, 162.7, 156.2, 132.8, 131.2, 130.0, 129.3, 124.5, 116.7, 115.2, 62.1, 59.7; Anal. calcd. for C16H13BrN2O4S: C, 46.83; H, 3.93; N, 6.70. Found: C, 46.96; H, 3.20; N, 6.84; MS (ESI) (m/z): 433.1/[M + Na]+.
2-(Benzylsulfonyl)-5-((2,4-dichlorophenoxy)methyl)-1,3,4-oxadiazole (5I-12). White solid; m.p.: 121–122 °C; 1H-NMR (500 MHz, CDCl3) δ 7.68 (d, J = 2.6 Hz, 1H, Ar-H), 7.46 (dd, J = 8.9, 2.6 Hz, 1H, Ar-H), 7.40–7.29 (m, 6H, Ar-H), 5.67 (s, 2H, -CH2-), 5.21 (s, 2H, -CH2-); 13C-NMR (125 MHz, CDCl3) δ 164.6, 162.0, 151.6, 131.3, 129. 7, 129.3, 128.7, 128.2, 126.2, 125.7, 122.8, 116.0, 60.7, 60.5; Anal. calcd. for C16H12Cl2N2O4S: C, 48.39; H, 3.43; N, 7.32. Found: C, 48.13; H, 3.03; N, 7.02; MS (ESI) (m/z): 399.4/[M + H]+.
2-(Benzylsulfonyl)-5-((4-chloro-2-methylphenoxy)methyl)-1,3,4-oxadiazole (5I-13). Yellow crystal; m.p.: 144–145 °C; 1H-NMR (500 MHz, CDCl3) δ 7.39–7.35 (m, 1H, Ar-H), 7.32 (d, J = 1.4 Hz, 1H, Ar-H), 7.31–7.29 (m, 2H, Ar-H), 7.27 (s, 2H, Ar-H), 7.26–7.24 (m, 1H, Ar-H), 7.11 (d, J = 8.8 Hz, 1H, Ar-H), 5.55 (s, 2H, -CH2-), 5.21 (s, 2H, -CH2-), 2.17 (s, 3H, Ar-CH3); 13C-NMR (125 MHz, CDCl3) δ 174.6, 169.8, 165.8, 162.4, 154.6, 131.8, 130.9, 129.8, 129.4, 129.2, 127.1, 126.3, 125.93, 114.4, 61.0, 60.6, 16.2; Anal. calcd. for C17H15ClN2O4S: C, 53.31; H, 4.23; N, 7.26. Found: C, 53.90; H, 3.99; N, 7.39; MS (ESI) (m/z): 401.2/[M + Na]+.
2-(Benzylsulfonyl)-5-(phenoxymethyl)-1,3,4-oxadiazole (5I-14). White solid; m.p.: 95–96 °C; 1H-NMR (500 MHz, CDCl3) δ 7.40–7.24 (m, 7H, Ar-H), 7.06 (ddd, J = 11.7, 8.3, 0.9 Hz, 3H, Ar-H), 5.53 (s, 2H, -CH2-), 5.20 (s, 2H, -CH2-); 13C-NMR (125 MHz, CDCl3) δ 165.4, 161.9, 157.0, 131.3, 129.7, 129.3, 128.8, 125.8, 122.0, 114.8, 60.5, 59.5; Anal. calcd. for C16H14N2O4S: C, 58.52; H, 4.60; N, 8.66. Found: C, 58.17; H, 4.27; N, 8.48; MS (ESI) (m/z): 353.2/[M + Na]+.
2-((4-Fluorophenoxy)methyl)-5-(methylsulfonyl)-1,3,4-thiadiazole (5II-1). White solid; m.p.: 107–109 °C; 1H-NMR (500 MHz, CDCl3) δ 7.08–7.00 (m, 2H, Ar-H), 6.99–6.92 (m, 2H, Ar-H), 5.52 (s, 2H, -CH2-), 3.48 (s, 3H, -CH3); 13C-NMR (125 MHz, CDCl3) δ 172.9, 170.0, 159.3, 157.4, 153.1, 116.6, 116.4, 116.2, 116.2, 65.5, 43.1; Anal. calcd. for C10H9FN2O3S2: C, 41.64; H, 3.49; N, 9.93. Found: C, 41.66; H, 3.15; N, 9.72; MS (ESI) (m/z): 311.2/[M + Na]+.
2-((4-Chlorophenoxy)methyl)-5-(methylsulfonyl)-1,3,4-thiadiazole (5II-2). White solid; m.p.: 119–120 °C; 1H-NMR (500 MHz, CDCl3) δ 7.46–7.26 (m, 2H, Ar-H), 7.15 (dd, J = 5.8, 3.2 Hz, 2H, Ar-H), 5.73 (s, 2H, -CH2-), 3.66 (s, 3H, -CH3); 13C-NMR (125 MHz, CDCl3) δ 172. 7, 170.6, 156.5, 130.0, 126.3, 117.4, 64.9, 43.6; Anal. calcd. for C10H9ClN2O3S2: C, 39.53; H, 3.32; N, 9.20. Found: C, 39.41; H, 2.98; N, 9.19; MS (ESI) (m/z): 327.1/[M + Na]+.
2-((4-Bromophenoxy)methyl)-5-(methylsulfonyl)-1,3,4-thiadiazole (5II-3). Yellow crystal; m.p.: 114–115 °C; 1H-NMR (500 MHz, CDCl3) δ 7.49–7.40 (m, 2H, Ar-H), 6.94–6.85 (m, 2H, Ar-H), 5.52 (s, 2H, -CH2-), 3.47 (s, 3H, -CH3); 13C-NMR (125 MHz, CDCl3) δ 172.5, 170.1, 156.1, 132.9, 116.7, 115.2, 65.0, 43.1; Anal. calcd. for C10H9BrN2O3S2: C, 33.29; H, 2.99; N, 7.76. Found: C, 34.39; H, 2.60; N, 8.02; MS (ESI) (m/z): 373.1/[M + Na]+.
2-((2,4-Dichlorophenoxy)methyl)-5-(methylsulfonyl)-1,3,4-thiadiazole (5II-4). Yellow crystal; m.p.: 160–162 °C; 1H-NMR (500 MHz, CDCl3) δ 7.45 (d, J = 2.5 Hz, 1H, Ar-H), 7.25 (dd, J = 8.8, 2.5 Hz, 1H, Ar-H), 6.98 (d, J = 8.8 Hz, 1H, Ar-H), 5.57 (s, 2H, -CH2-), 3.49 (s, 3H, -CH3); 13C-NMR (125 MHz, CDCl3) δ 172.0, 170.3, 151.6, 130.8, 128.1, 124.6, 120.0, 115.1, 66.2, 43.2; Anal. calcd. for C10H8Cl2N2O3S2: C, 35.37; H, 2.81; N, 8.26. Found: C, 35.41; H, 2.38; N, 8.26; MS (ESI) (m/z): 361.1/[M + Na]+.
2-((4-Chloro-2-methylphenoxy)methyl)-5-(methylsulfonyl)-1,3,4-thiadiazole (5II-5). White solid; m.p.: 160–161 °C; 1H-NMR (500 MHz, CDCl3) δ 7.19 (d, J = 2.5 Hz, 1H, Ar-H), 7.16 (dd, J = 8.6, 2.6 Hz, 1H, Ar-H), 6.81 (d, J = 8.6 Hz, 1H, Ar-H), 5.52 (s, 2H, -CH2-), 3.49 (s, 3H, -CH3), 2.27 (s, 3H, Ar-CH3); 13C-NMR (125 MHz, CDCl3) δ 172.9, 170.0, 153.8, 131.3, 129.0, 127.4, 126.8, 112.3, 65.2, 43.1, 16.3; Anal. calcd. for C11H11ClN2O3S2: C, 39.95; H, 3.95; N, 8.57. Found: C, 41.44; H, 3.48; N, 8.79; MS (ESI) (m/z): 341.2/[M + Na]+.
2-(Ethylsulfonyl)-5-((4-fluorophenoxy)methyl)-1,3,4-thiadiazole (5II-6). Yellow crystal; m.p.: 89–90 °C; 1H-NMR (500 MHz, CDCl3) δ 7.04 (dd, J = 9.1, 8.1 Hz, 2H, Ar-H), 6.95 (dd, J = 9.1, 4.2 Hz, 2H), Ar-H, 5.51 (s, 2H, -CH2-), 3.60 (q, J = 7.4 Hz, 2H, -CH2CH3), 1.47 (t, J = 7.4 Hz, 3H, -CH3); 13C-NMR (125 MHz, CDCl3) δ 172.9, 169.1, 159.3, 157.4, 153.2, 116.6, 116.4, 116.2, 116.2, 65.6, 50.3, 7.2; Anal. calcd. for C11H11FN2O3S2: C, 43.19; H, 4.09; N, 9.19. Found: C, 43.70; H, 3.67; N, 9.27; MS (ESI) (m/z): 325.2/[M + Na]+.
2-((2,4-Dichlorophenoxy)methyl)-5-(ethylsulfonyl)-1,3,4-thiadiazole (5II-7). White solid; m.p.: 127–128 °C; 1H-NMR (500 MHz, CDCl3) δ 7.45 (d, J = 2.5 Hz, 1H, Ar-H), 7.25 (dd, J = 8.8, 2.6 Hz, 1H, Ar-H), 6.97 (d, J = 8.8 Hz, 1H, Ar-H), 5.57 (s, 2H, -CH2-), 3.61 (q, J = 7.4 Hz, 2H, -CH2CH3), 1.49 (t, J = 7.4 Hz, 3H, -CH3); 13C-NMR (125 MHz, CDCl3) δ 172.1, 169.3, 151.6, 130.7, 128.4, 128.1, 124.6, 115.1, 66.3, 50.2, 7.2; Anal. calcd. for C11H10Cl2N2O3S2: C, 37.18; H, 3.37; N, 7.96. Found: C, 37.40; H, 2.85; N, 7.93; MS (ESI) (m/z): 375.1/[M + Na]+.
2-(Benzylsulfonyl)-5-((4-fluorophenoxy)methyl)-1,3,4-thiadiazole (5II-8). White solid; m.p.: 132–134 °C; 1H-NMR (500 MHz, CDCl3) δ 7.02 (dd, J = 9.0, 8.1 Hz, 2H, Ar-H), 6.89 (dd, J = 9.2, 4.2 Hz, 2H, Ar-H), 5.46 (s, 2H, -CH2-), 4.79 (s, 2H, -CH2-); 13C-NMR (125 MHz, CDCl3) δ 173.4, 168.6, 159.3, 157.4, 153.1, 153.0, 131.3, 129.6, 129.2, 125.9, 116.6, 116.4, 116.2, 116.1, 65.5, 61.9; Anal. calcd. for C16H13FN2O3S2: C, 52.69; H, 3.89; N, 7.64. Found: C, 52.73; H, 3.60; N, 7.69; MS (ESI) (m/z): 387.2/[M + Na]+.
2-(Benzylsulfonyl)-5-((4-chlorophenoxy)methyl)-1,3,4-thiadiazole (5II-9). White solid; m.p.: 140–141 °C; 1H-NMR (500 MHz, CDCl3) δ 7.33 (ddd, J = 5.6, 3.5, 1.6 Hz, 2H, Ar-H), 7.30–7.28 (m, 3H, Ar-H), 7.25 (d, J = 1.7 Hz, 2H, Ar-H), 6.87 (dd, J = 8.8, 1.8 Hz, 2H, Ar-H), 5.47 (s, 2H, -CH2-), 4.79 (s, 2H, -CH2-); 13C-NMR (125 MHz, CDCl3) δ 173.1, 168.7, 155.5, 131.3, 129.9, 129.6, 129.2, 127.8, 125.8, 116.2, 65.0, 61.9; Anal. calcd. for C16H13ClN2O3S2: C, 50.92; H, 3.93; N, 7.50. Found: C, 50.46; H, 3.44; N, 7.36; MS (ESI) (m/z): 403.2/[M + Na]+.
2-(Benzylsulfonyl)-5-((4-bromophenoxy)methyl)-1,3,4-thiadiazole (5II-10). White solid; m.p.: 147–148 °C; 1H-NMR (500 MHz, CDCl3) δ 7.48–7.39 (m, 2H, Ar-H), 7.39–7.22 (m, 5H, Ar-H), 6.88–6.78 (m, 2H, Ar-H), 5.47 (s, 2H, -CH2-), 4.78 (s, 2H, -CH2-); 13C-NMR (125 MHz, CDCl3) δ 173.0, 168.7, 156.0, 132.8, 131.3, 129.6, 129.2, 125.8, 116.7, 115.1, 64.9, 61.9; Anal. Calcd for C16H13BrN2O3S2: C, 45.37; H, 3.47; N, 6.62. Found: C, 45.18; H, 3.08; N, 6.59; MS (ESI) (m/z): 449.1/[M + Na]+.
2-(Benzylsulfonyl)-5-((2,4-dichlorophenoxy)methyl)-1,3,4-thiadiazole (5II-11). White solid; m.p.: 124–125 °C; 1H-NMR (500 MHz, CDCl3) δ 7.43–7.41 (m, 1H, Ar-H), 7.37–7.27 (m, 5H, Ar-H), 7.23 (ddd, J = 8.8, 2.4, 1.7 Hz, 1H, Ar-H), 6.92 (dd, J = 8.8, 1.2 Hz, 1H, Ar-H), 5.52 (s, 2H, -CH2-), 4.79 (s, 2H, -CH2-); 13C-NMR (125 MHz, CDCl3) δ 172.5, 168.9, 151.5, 131.3, 130.7, 130.0, 129.2, 128.3, 128.0, 125.8, 124.53, 115.1, 66.1, 61.9; Anal. calcd. for C16H12Cl2N2O3S2: C, 46.74; H, 3.28; N, 6.80. Found: C, 46.27; H, 2.91; N, 6.75; MS (ESI) (m/z): 437.1/[M + Na]+.
2-(Benzylsulfonyl)-5-((4-chloro-2-methylphenoxy)methyl)-1,3,4-thiadiazole (5II-12). White solid; m.p.: 125–126 °C; 1H-NMR (500 MHz, CDCl3) δ 7.39–7.26 (m, 5H, Ar-H), 7.18–7.10 (m, 2H, Ar-H), 6.75 (d, J = 8.6 Hz, 1H, Ar-H), 5.46 (s, 2H, -CH2-), 4.79 (s, 2H, -CH2-), 2.19 (s, 3H, Ar-CH3); 13C-NMR (125 MHz, CDCl3) δ 173.4, 168.5, 153.7, 131.3, 131.2, 129.6, 129.2, 129.0, 127.3, 126.8, 125.87, 112.3, 65.1, 61.9, 16.2; Anal. calcd. for C17H15ClN2O3S2: C, 51.93; H, 4.02; N, 7.17. Found: C, 51.71; H, 3.83; N, 7.09; MS (ESI) (m/z): 417.2/[M + Na]+.

3.3. X-ray Diffraction Analysis

Crystal structure of compound 5II-9 is shown in Figure 5. Colorless crystal of compound 5II-9 (0.12 mm × 0.13 mm × 0.13 mm) was mounted on a quartz fiber with protection oil. Cell dimensions and intensities were measured at 293 K on an Xcalibur (Eos, Gemini) diffractometer with graphite monochromated Cu Kα radiation (λ = 1.54184 Å). A total of 23281 reflections were measured, of which 3130 were unique (Rint = 0.0728) in the range of 4.66 < θ < 67.23° (h, −13 to 13; k, −10 to 5; l, −40 to 40), and 2142 observed reflections with I > 2σ (I) were used in the refinement on F2. The structure was solved by direct method with the SHELXTL-97 program. All of the non-H atoms were refined anisotropically by full-matrix least-squares to give the final R = 0.0459 and WR = 0.0459. All hydrogen atoms were computed and refined using a riding model. The atomic coordinates for 5II-9 have been deposited at the Cambridge Crystallographic Data Centre. CCDC 1008894 contains the supplementary crystallographic data for this paper.

3.4. Antibacterial Bioassay In Vitro

The antibacterial activity against X. oryzae, R. solanacearum, X. axonopodis in vitro were evaluated according to the previously reported turbidmeter test [21]. The working solution concentration was set at 200 and 100 μg/mL. Negative control(DMSO in sterile distilled water containing 0.1% Tween 20) were set up identically to test for absence of compound; Bismerthiazol (5,5′-(methylenediimino)bis-1,3,4-Thiadiazole-2(3H)-thione, 20% WP, China Jiangxi Heyi Chem. Ind. Co., Ltd., Pengze, China), Kocide 3000 (Copper hydroxide, 46.1%, DuPont, Wilmington, DE, USA)) and Thiodiazole-copper (2-amino-5-mercapto-1,3,4-thiadiazole-copper, 20% SC, China Zhejiang Longwan Chem. Ind. Co., Ltd., Wenzhou, China) served as positive controls. Approximately 1 mL of stock solution was added to 4 mL nontoxic liquid medium nutrient broth (NB, 3 g of beef extract, 5 g of peptone, 1 g of yeast powder, 10 g of glucose, and 1000 mL of distilled water, pH 7.0 to 7.2) in tubes. Then, approximately 40 μL NB culture media containing bacteria was added to 5 mL of NB solution containing compounds, DMSO or Kocide 3000, Thiodiazole-copper. Then, the inoculated test tubes were incubated at 30 ± 1 °C with continuous shaking at 180 rpm for 24 h. The growth of bacterial culture was monitored with a spectrophotometer by measuring the optical density at 600 nm (OD600). The inhibitory rate of bacterial culture growth was calculated using the following equation:
I (%) = (CK − T)/CK × 100. Where “CK” implies the value of the corrected optical density of bacterial growth on untreated NB (negative control), and “T” means the value of corrected optical density of bacterial growth on treated NB; “I” denotes the inhibition rate.
The EC50 values of some well performed compounds were evaluated using the above-mentioned method under 5 different concentrations (e.g., 50, 25, 12.5, 6.25, 3.12 μg/mL for X. oryzae and R. solanacearum and 200, 100, 50, 25, 12.5 μg/mL for X. axonopodis). The average EC50 was computed from at least three separate analyses for growth inhibition with Log10 probit analysis of SPSS 17.0.

3.5. Antibacterial Activity Bioassay In Vivo

The in vivo preventive activities of compounds 5I-1, 5I-2, 5I-4 on lesion formation caused by X. oryzae in rice plant were evaluated according to the following procedure under greenhouse condition [22,23]. Rice seeds were soaked with water overnight and sown in small pots. Then the rooted seedlings were transplanted when they were 20 days old in net-house. The rice plants grown for 35–40 day bearing 3–4 leaves were ready to be treated. The tested compounds were dissolved in 120 μL DMSO and diluted with 30 mL 0.1% Tween-20 to the final concentration of 200 μg/mL. For comparison, parallel test were performed on Bismerthiazol, Thiodiazole-copper (positive control), no-compound (negative control), distilled water (blank control, absence of bacterial infection and compound treatment) with three replicates of each treatment. The seedlings on the 45th day after sowing received foliar spray applications with 4 mL test compounds solution. One day later, the rice plants were clip inoculated with a bacterial suspension of X. oryzae culture (108 CFU/mL). Development of bacterial blight lesions was scored 14 days after the inoculation. The disease severity including infection rate and disease index was determined in terms incidence of lesion length and area. The percent disease suppression in the compounds treatment was calculated as compared to disease index of the untreated control in three independent experiments. And the data were analyzed for statistical significance using the least significant difference (LSD) test. Inhibitory effect afforded by the chemical treatment from that of the untreated control was calculated with the following formula:
Disease suppression (%) = (C − T)/C × 100, where C implies disease index in untreated rice leaves; T means disease index in compound treated rice leaves.

3.6. Phytotoxic Bioassay

5I-1, 5I-2, 5I-4 were evaluated for their phytotoxicity on rice seed germination and tobacco plant as reference described [27,28].
We initially assessed the possible toxicity on rice seed. For each treatment, a total of 4 surface-sterilized rice seeds (Fengyou Xiangzhan) were germinated in 200 μL water or compounds solution at the appropriate concentration (0, 1, 10, 50,100, and 300 μM) in each well of a 24-well plate for seven days. And 200 μL double-distilled water was implemented in the third day. Five different concentrations of test compound, in triplicate, and reared in an incubator maintained at 28 ± 1 °C with a photoperiod of 14 h light/10 h dark. Bismerthiazol was set as comparative agent. Seedling morphology was recorded and shoot length was measured. Phytotoxicity values in rice germination assays are given as minimal compound concentrations (μM) causing significant alteration of shoot length.
Tobacco (Nicotiana benthamiana) plants were grown from seed in a heated glasshouse and used between 20 and 30 days old. 50 μL chemically solution at 50, 100, 200 or 300 μM were infiltrated into the mesophylls of fully expanded tobacco leaves (previously wounded with a needle) using a micropipette. The plants were kept at standard glasshouse conditions for seven days. Up to six independent inoculations were carried out in a single leaf, and at least three independent inoculations were performed for each compound and concentration, randomly distributed in different leaves and plants. Control infiltrations with water or comparative agent Bismerthiazol at the same molar concentration were performed. The appearance of symptoms on the leaves was followed for four days after infiltration. Toxicity was measured as the lesion diameter.

4. Conclusions

In summary, a series of novel aroxymethyl-1,3,4-oxadiazole/thiadiazole sulfone derivatives were obtained via embedding the substituted phenoxymethyl group into scaffold of heterocyclic substituted sulfone. The antibacterial activities were studied by the turbidimeter test against pathogens X. oryzae, R. solanacearum, and X. axonopodis, respectively. 1,3,4-Oxadiazole sulfones 5I are more potent as antibacterials compared to their corresponding 1,3,4-thiadiazole derivatives 5II and positive controls. Interestingly, as compared to commercial bactericides or our previous reported sulfone analogs (Table 4), compounds 5I-1–5I-7 possessed remarkably higher in vitro bactericidal activity against tested bacteria, which indicating that high-efficient target molecules were successfully obtained as we proposed. In vivo tests also revealed that 5I-1, 5I-2 and 5I-4 exhibited excellent preventive effects against X. axonopodis with inhibitory effect of 90.4%, 77.7% and 81.1% respectively. Compared to Bismerthiazol, 5I-1, 5I-2 exhibited no apparently phytotoxicity in tobacco leaves and rice seed germination with exception that 5I-4 highly suppressed both root and shoot development. The structure-activity relationship (SAR) analyses have suggested that aroxymethyl is found extremely useful to enhance the activity of the target structure and 1,3,4-oxadiazole sulfone derivatives bearing suitably substituted phenoxymethyl group may lead to the development of potent bactericides for crop protection.

Supplementary Materials

1H and 13C NMR spectra of all the compounds are presented as Supporting Information; crystallographic data of compound 5II-9 (CCDC 1008894) for this paper could be obtained free of charge from The Cambridge Crystallographic Data Centre via www.ccdc.cam.ac.uk. The supplementary is available online at www.mdpi.com/1420-3049/22/1/64/s1.

Acknowledgments

This work was supported by the National Natural Science Foundation of China (20962005) and the Excellent Young Science and Technology Talent Cultivation Plan (201122).

Author Contributions

Jin conceived the project. Zhou & Su contributed equally to this work. Su performed most of the experimental work while Zhou & Liao implemented the biological test protocols. Qi prepared and participated in the phytotoxity assay. All authors analyzed the data and contributed to manuscript preparation. Zhou wrote the manuscript.

Conflicts of Interest

The authors declare no conflict of interest.

References

  1. Spago, F.R.; Ishii Mauro, C.S.; Oliveira, A.G.; Beranger, J.P.O.; Cely, M.V.T.; Stanganelli, M.M.; Simionato, A.S.; San Martin, J.A.B.; Andrade, C.G.T.J.; Mello, J.C.P.; et al. Pseudomonas aeruginosa produces secondary metabolites that have biological activity against plant pathogenic Xanthomonas species. Crop Prot. 2014, 62, 46–54. [Google Scholar] [CrossRef]
  2. Hayward, A.C. Biology and epidemiology of bacterial wilt caused by Pseudomonas solanacearum. Annu. Rev. Phytopathol. 1991, 29, 65–87. [Google Scholar] [CrossRef] [PubMed]
  3. Milling, A.; Babujee, L.; Allen, C. Ralstonia solanacearum, extracellular polysaccharide is a specific elicitor of defense responses in wilt-resistant tomato plants. PLoS ONE 2011, 6, e15853. [Google Scholar] [CrossRef] [PubMed]
  4. Xu, W.M.; Han, F.F.; He, M.; Hu, D.Y.; He, J.; Yang, S.; Song, B.A. Inhibition of tobacco bacterial wilt with sulfone derivatives containing an 1,3,4-Oxadiazole Moiety. J. Agric. Food Chem. 2012, 60, 1036–1041. [Google Scholar] [CrossRef] [PubMed]
  5. Denny, T. Plant Pathogenic Ralstonia Species. Plant-Associated Bacteria; Springer: Dordrecht, The Netherlands, 2007; pp. 1–62. [Google Scholar]
  6. Imazaki, I.; Nakaho, K. Pyruvate-amended modified SMSA medium: Imporved sensitivity for detection of Ralstonia solanacearum. J. Gen. Plant Pathol. 2010, 76, 52–61. [Google Scholar] [CrossRef]
  7. Lo Cantore, P.; Shanmugaiah, V.; Iacbellis, N.S. Antibacterial activity of essential oil components and their potential use in seed disinfection. J. Agric. Food Chem. 2009, 57, 9454–9461. [Google Scholar] [CrossRef] [PubMed]
  8. Wang, P.Y.; Zhou, L.; Zhou, J.; Wu, Z.B.; Xue, W.; Song, B.A.; Yang, S. Synthesis and antibacterial activity of pyridinium-tailored 2,5-substituted-1,3,4-oxadiazole thioether/sulfoxide/sulfone derivatives. Bioorg. Med. Chem. Lett. 2016, 26, 1214–1217. [Google Scholar] [PubMed]
  9. Zhu, X.F.; Xu, Y.; Peng, D.; Zhang, Y.; Huang, T.T.; Wang, J.X. Detection and characterization of bismerthiazol-resistance of Xanthomonas oryzae, pv. oryzae. Crop Prot. 2013, 47, 24–29. [Google Scholar]
  10. Zhou, X.J.; Wang, J.; Yang, Y.W.; Zhao, T.C.; Gao, B.D. Advances in tobacco bacterial wilt disease. Microbiol. China 2012, 39, 1479–1486. [Google Scholar]
  11. Kleefeld, G.; Diehr, H.J.; Haas, W.; Dehne, H.W.; Brandes, W. Fungicidal Agents Based on Heterocyclic Substituted Sulfones. U.S. Patent 5,166,165, 27 May 1992. [Google Scholar]
  12. Xu, W.M.; He, J.; He, M.; Han, F.F.; Chen, X.H.; Pan, Z.X.; Wang, J.; Tong, M.G. Synthesis and antifungal activity of novel sulfone derivatives containing 1,3,4-oxadiazole moieties. Molecules 2011, 16, 9129–9141. [Google Scholar] [CrossRef] [PubMed]
  13. Xu, W.M.; Yang, S.; Bhadury, P.; He, J.; He, M.; Gao, L.L.; Hu, D.Y.; Song, B.A. Synthesis and bioactivity of novel sulfone derivatives containing 2,4-dichlorophenyl substituted 1,3,4-oxadiazole/thiadiazole moiety as chitinase inhibitors. Pestic. Biochem. Phys. 2011, 101, 6–15. [Google Scholar] [CrossRef]
  14. Li, P.; Yin, J.; Xu, W.M.; Wu, J.; He, M.; Hu, D.Y.; Yang, S.; Song, B.A. Synthesis, antibacterial activities, and 3D-QSAR of sulfone derivatives containing 1,3,4-oxadiazole moiety. Chem. Biol. Drug Des. 2013, 82, 546–556. [Google Scholar] [CrossRef] [PubMed]
  15. Li, P.; Shi, L.; Yang, X.; Yang, L.; Chen, X.W.; Wu, F.; Shi, Q.C.; Xu, W.M.; He, M.; Hu, D.Y.; et al. Design, synthesis, and antibacterial activity against rice bacterial leaf blight and leaf streak of 2,5-substituted-1,3,4-oxadiazole/thiadiazole sulfone derivative. Bioorg. Med. Chem. Lett. 2014, 24, 1677–1680. [Google Scholar] [CrossRef] [PubMed]
  16. Li, S.; Li, P.; Wang, W.L.; Gao, M.N.; Wu, Z.X.; Song, X.P.; Hu, D.Y. Antibacterial activity and mechanism of action of sulfone derivatives containing 1,3,4-oxadiazole moieties on rice bacterial leaf blight. Molecules 2015, 20, 11660–11675. [Google Scholar] [CrossRef] [PubMed]
  17. Wei, T.B.; Chen, J.; Xu, R.; Zhang, Y.M. Synthesis, crystal structure and biological activities of 5-(2-aryloxymethylbenzimidazole-1-carbadehyde)-1,3,4-oxadiazole-2-thine. Chin. J. Org. Chem. 2009, 29, 758–763. [Google Scholar]
  18. Sauter, H.; Steglich, W.; Anke, T. Strobilurins: Evolution of a New Class of Active Substances. Angew. Chem. Int. Ed. 1999, 38, 1328–1349. [Google Scholar] [CrossRef]
  19. Chen, C.J.; Song, B.A.; Yang, S.; Xu, G.F.; Bhadury, P.S.; Jin, L.H.; Hu, D.Y.; Li, Q.Z.; Liu, F.; Xue, W. Synthesis and antifungal activities of 5-(3,4,5-trimethoxyphenyl)-2-sulfonyl-1,3,4-thiazole and 5-(3,4,5-trimethoxyphenyl)-2-sulfonyl-1,3,4-oxadiazole derivatives. Bioorg. Med. Chem. 2007, 15, 3981–3989. [Google Scholar] [CrossRef] [PubMed]
  20. Chen, Q.; Zhu, X.L.; Jiang, L.L.; Liu, Z.M.; Yang, G.F. Synthesis, antifungal activity and comfa analysis of novel 1,2,4-triazolo[1,5-a]pyrimidine derivatives. Eur. J. Med. Chem. 2008, 43, 595–603. [Google Scholar] [CrossRef] [PubMed]
  21. Dalgaard, P.; Ross, T.; Kamperman, L.; Neumeryer, K.; McMeekin, T.A. Estimation of bacterial growth rates from turbidimetric and viable count data. Int. J. Food Microbiol. 1994, 23, 391–404. [Google Scholar] [CrossRef]
  22. Schaad, N.W.; Wang, Z.K.; Di, M.; Mcbeath, J.; Peterson, G.L.; Bonde, M.R. An improved infiltration technique to test the pathogenicity of Xanthomonas oryzae pv. oryzae in rice seedlings. Seed Sci. Technol. 1996, 24, 449–456. [Google Scholar]
  23. Velusamy, P.; Immanuel, J.E.; Gnanamanickam, S.S.; Thomashow, L. Biological control of rice bacterial blight by plant-associated bacteria producing 2,4-diacetylphloroglucinol. Can. J. Microbiol. 2006, 52, 56–65. [Google Scholar] [CrossRef] [PubMed]
  24. Jiang, L.L.; Tan, Y.; Zhu, X.L.; Wang, Z.F.; Zuo, Y.; Chen, Q.; Xi, Z.; Yang, G.F. Design, synthesis, and 3D-QSAR analysis of novel 1,3,4-oxadiazol-2(3H)-ones as protoporphyrinogen oxidase inhibitors. J. Agric. Food Chem. 2010, 58, 2643–2651. [Google Scholar] [CrossRef] [PubMed]
  25. Zuo, Y.; Yang, S.G.; Jiang, L.L.; Hao, G.F.; Wang, Z.F.; Wu, Q.Y.; Xi, Z.; Yang, G.F. Quantitative structure–activity relationships of 1,3,4-thiadiazol-2(3H)-ones and 1,3,4-oxadiazol-2(3H)-ones as human protoporphyrinogen oxidase inhibitors. Bioorg. Med. Chem. 2012, 20, 296–304. [Google Scholar] [CrossRef] [PubMed]
  26. Xu, W.M.; Song, B.A.; Yang, S.; Hu, D.Y.; Zeng, S.; He, M.; Li, P.; Yin, J. Antiacterial Activity of Sulfone Derivatives Containing 1,3,4-Oxadiazole Moiety. In Proceedings of the Collection of the 10th National Pesticide Research and Development Conference, Guiyang, China, 6 June 2014; pp. 44–48.
  27. Vilà, S.; Badosa, E.; Montesinos, E.; Planas, M.; Feliu, L. Synthetic cyclolipopeptides selective against microbial, plant and animal cell targets by incorporation of d-amino acids or histidine. PLoS ONE 2016, 11, e0151639. [Google Scholar] [CrossRef] [PubMed]
  28. Nadal, A.; Montero, M.; Company, N.; Badosa, E.; Messeguer, J.; Montesinos, L. Constitutive expression of transgenes encoding derivatives of the synthetic antimicrobial peptide bp100: Impact on rice host plant fitness. BMC Plant Biol. 2012, 12, 1–22. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  • Sample Availability: Not available.
Molecules 22 00064 g001 550
Figure 1. Strategic Design for the Target Compounds.
Figure 1. Strategic Design for the Target Compounds.
Molecules 22 00064 g001
Molecules 22 00064 g002 550
Figure 2. Synthetic Route to the Target Compounds 5I-1–5I-14 and 5II-1–5II-1.
Figure 2. Synthetic Route to the Target Compounds 5I-1–5I-14 and 5II-1–5II-1.
Molecules 22 00064 g002
Molecules 22 00064 g003 550
Figure 3. Phytotoxicity assay on tobacco plant representative examples of tobacco leaves four days after inoculation.
Figure 3. Phytotoxicity assay on tobacco plant representative examples of tobacco leaves four days after inoculation.
Molecules 22 00064 g003
Molecules 22 00064 g004 550
Figure 4. Phytotoxicity assay on rice seeds germination.
Figure 4. Phytotoxicity assay on rice seeds germination.
Molecules 22 00064 g004
Molecules 22 00064 g005 550
Figure 5. Crystal structure of compound 5II-9.
Figure 5. Crystal structure of compound 5II-9.
Molecules 22 00064 g005
Table
Table 1. Inhibition rate of Compounds 5I and 5II against Pathogenic Bacteria X. oryzae, R. solanacearum and X. axonopodis a.
Table 1. Inhibition rate of Compounds 5I and 5II against Pathogenic Bacteria X. oryzae, R. solanacearum and X. axonopodis a.
Compd.R1/R2X. oryzaeR. solanacearumX. axonopodis
200 μg/mL100 μg/mL200 μg/mL100 μg/mL200 μg/mL100 μg/mL
5I-14-F/CH31001001001008072
5I-24-Cl/CH31001001001008876
5I-34-Br/CH31001001001009190
5I-42,4-diCl/CH31001001001006948
5I-52-Me-4-Cl/CH310010010010010054
5I-6H/CH31001001001008857
5I-74-F/CH2CH3100100100996553
5I-82,4-diCl/CH2CH31008797436236
5I-94-F/CH2Ph10010033257250
5I-104-Cl/CH2Ph904824197462
5I-114-Br/CH2Ph563818131116
5I-122,4-diCl/CH2Ph987033202623
5I-132-Me-4-Cl/CH2Ph331315870
5I-14H/CH2Ph957869377653
5II-14-F/CH3999250494036
5II-24-Cl/CH3847356452716
5II-34-Br/CH330282672518
5II-42,4-diCl/CH3161818152320
5II-52-Me-4-Cl/CH34216982524
5II-64-F/CH2CH365557121518
5II-72,4-diCl/CH2CH3201300326
5II-84-F/CH2Ph24830102421
5II-94-Cl/CH2Ph191417181423
5II-104-Br/CH2Ph10011158
5II-112,4-diCl/CH2Ph371427263832
5II-122-Me-4-Cl/CH2Ph50001033
Bismerthiazol b 7254100996745
Kocide 3000 b 69521001003925
Thiodiazole-copper b 693550356547
a Average of three replicates; b The commercial agricultural antibacterial agents Bismerthiazol, Kocide 3000, and Thiodiazole-copper were used as positive control.
Table
Table 2. Antibacterial Activity of Compounds 5I-1–5I-7 against X. oryzae, R. solanacearu, and X. axonopodis a.
Table 2. Antibacterial Activity of Compounds 5I-1–5I-7 against X. oryzae, R. solanacearu, and X. axonopodis a.
Compd.X. oryzaeR. solanacearumX. axonopodis
EC50 (μg/mL)Regression EquationrEC50 (μg/mL)Regression EquationrEC50 (μg/mL)Regression Equationr
5I-10.45 ± 0.06y = 0.90x + 5.320.881.97 ± 0.23y = 2.25x + 4.340.9880.46 ± 5.38y = 0.99x + 2.770.96
5I-21.44 ± 0.18y = 2.73x + 4.570.9313.42 ± 1.54y = 2.79x + 1.860.9231.35 ± 3.56y = 1.95x + 2.090.98
5I-31.67 ± 0.22y = 2.96x + 4.400.9719.61 ± 0.98y = 1.44x + 3.140.9324.89 ± 2.52y = 1.52x + 2.870.95
5I-40.72 ± 0.15y = 2.28x + 5.330.8920.51 ± 1.56y = 2.18x + 2.140.9849.05 ± 2.34y = 1.40x + 2.580.93
5I-51.67 ± 0.16y = 2.78x + 4.380.9614.94 ± 1.27y = 3.43x + 0.970.9596.83 ± 5.78y = 1.36x + 2.290.97
5I-61.86 ± 0.23y = 1.59x + 4.570.9013.55 ± 2.12y = 2.62x + 2.040.9185.02 ± 4.32y = 1.06x + 2.960.96
5I-70.52 ± 0.16y = 0.99x + 5.280.967.75 ± 1.01y = 1.04x + 4.080.9952.23 ± 2.14y = 1.67x + 2.140.97
Bismerthiazol b92.61 ± 2.15y = 1.50x + 2.050.9859.69 ± 2.56y = 1.21x + 2.840.98119.5 ± 5.1y = 1.50x + 1.820.98
Kocide 3000 b101.60 ± 5.12y = 160x + 1.800.9945.91 ± 6.6y = 4.87x − 3.100.98>200//
Thiodiazole-copper b121.82 ± 3.59y = 1.54x + 1.790.98>200//107.04 ± 1.96y = 2.15x + 0.940.98
a The statistical analysis was conducted by ANOVA method at the condition of equal variances assumed (p > 0.05) and equal variances not assumed (p < 0.05); b The commercial agricultural antibacterial agents Bismerthiazol, Kocide 3000, and Thiodiazole-copper were used as positive control.
Table
Table 3. In vivo Inhibitory Effect of Testing Compounds against X. oryzae at 200 μg/mL.
Table 3. In vivo Inhibitory Effect of Testing Compounds against X. oryzae at 200 μg/mL.
Compd.14 Days after Spraying
Morbidity (%) cDisease IndexProtective Efficiency (%) d
5I-1100.015.690.4 ± 2.8
5I-2100.023.877.7 ± 3.4
5I-4100.017.581.1 ± 1.9
Bismerthiazol100.060.025.6 ± 4.4
Thiodiazole-copper100.055.632.0 ± 3.0
CK1 a0.00.0100.0 ± 0.0
CK2 b100.091.1/
a CK1: blank control sample; b CK2: negative control sample; c Bacteria inoculation was successful and all inoculated plants were infected; d Statistical analysis was conducted via the ANOVA method at a condition of equal variances assumed (p > 0.05) and equal variances not assumed (p < 0.05).
Table
Table 4. The Contribution of 2-Substituents in 1,3,4-Oxadiazole Ring towards Antibacterial Activity.
Table 4. The Contribution of 2-Substituents in 1,3,4-Oxadiazole Ring towards Antibacterial Activity.
Plant Bacteria Molecules 22 00064 i001
EC50 (μg/mL) a
RX = No AtomX = CH2X = OCH2
X. oryzaeF9.89 ± 1.52 161.07 ± 0.68 150.45 ± 0.06 (5I-1)
4-Cl23.21 ± 0.98 1612.23 ± 1.45 151.44 ± 0.18 (5I-2)
2,4-di Cl52.14 ± 1.05 161.96 ± 0.99 150.72 ± 0.15 (5I-4)
R. solanacearumF8.29 ± 0.56 14/ b1.97 ± 0.27 (5I-1)
4-Cl120.90 ± 2.6 14NA 413.42 ± 1.54 (5I-2)
2,4-di Cl16.55 ± 1.12 1459.9 2620.51 ± 1.56 (5I-4)
Note: a The EC50 values of the positive control for the reference compounds and present compounds were determined under the same condition and are constantly in same level; b “/”means no reported data. NA, not active. Superscript [4,14,15,16,26] are the references cited.
Table
Table 5. Phytotoxicity of target bactericidal compounds on rice germination a.
Table 5. Phytotoxicity of target bactericidal compounds on rice germination a.
Comp.Inhibition on Rice Germination Shoot Length (cm)
1 μM10 μM50 μM100 μM300 μM
5I-13.8 ± 0.53.8 ± 0.53.7 ± 0.62.8 ± 0.20.1 ± 0.1
5I-23.7 ± 0.63.2 ± 0.33.2 ± 0.61.5 ± 0.00.5 ± 0.1
5I-41.7 ± 0.31.6 ± 0.21.0 ± 0.11.1 ± 0.00.5 ± 0.0
Bismerthiazol b4.2 ± 0.63.5 ± 0.53.7 ± 0.43.2 ± 0.30.1 ± 0.1
H2O4.6 ± 0.2
a Rice seeds germinated for seven days in H2O or increased concentrations of compounds. The size of rice germination shoot length (cm) is considered as a measure of phytotoxicity. The numbers indicate confidence interval of the mean. b Antibacterial agents Bismerthiazol was used as comparative agent.

Share and Cite

MDPI and ACS Style

Su, S.; Zhou, X.; Liao, G.; Qi, P.; Jin, L. Synthesis and Antibacterial Evaluation of New Sulfone Derivatives Containing 2-Aroxymethyl-1,3,4-Oxadiazole/Thiadiazole Moiety. Molecules 2017, 22, 64. https://doi.org/10.3390/molecules22010064

AMA Style

Su S, Zhou X, Liao G, Qi P, Jin L. Synthesis and Antibacterial Evaluation of New Sulfone Derivatives Containing 2-Aroxymethyl-1,3,4-Oxadiazole/Thiadiazole Moiety. Molecules. 2017; 22(1):64. https://doi.org/10.3390/molecules22010064

Chicago/Turabian Style

Su, Shihu, Xia Zhou, Guoping Liao, Puying Qi, and Linhong Jin. 2017. "Synthesis and Antibacterial Evaluation of New Sulfone Derivatives Containing 2-Aroxymethyl-1,3,4-Oxadiazole/Thiadiazole Moiety" Molecules 22, no. 1: 64. https://doi.org/10.3390/molecules22010064

Article Metrics

Back to TopTop