Search Results (10)

Background/Objectives: This systematic review seeks to assess the effectiveness of different orthodontic and combined orthodontic–surgical approaches for correcting gummy smile, with a focus on treatment efficacy, duration, and the potential for integrating various techniques. The objective is to offer evidence-based recommendations for the optimal management of gummy smile. Methods: A thorough search of the literature was conducted in the PubMed, Cochrane Library, Scopus, and Web of Science databases, covering publications from 1 January 1982 to 4 November 2024. Only randomized controlled trials involving adult human subjects with available full-text articles were included, while systematic reviews, editorials, case reports, and studies involving animals or in vitro experiments were excluded. Studies were selected based on their relevance to orthodontic or combined orthodontic–surgical treatments for correcting excessive gingival display (gummy smile), particularly in cases where residual growth does not impact treatment outcomes. The primary focus was on evaluating the efficacy of these interventions in improving smile aesthetics. Follow-up data were considered when available, though not required for inclusion. Results: The findings revealed that both orthodontic and surgical methods are effective in reducing gingival display. Orthognathic surgery offers lasting outcomes, particularly for patients with vertical maxillary excess, whereas orthodontic treatments, including the use of skeletal anchorage devices, are particularly effective for less severe cases. Minimally invasive approaches, such as botulinum toxin injections, provided temporary but promising results for patients reluctant to undergo surgery. Conclusions: Orthodontic and surgical techniques are viable options for treating gummy smile, with treatment choices depending on the condition’s severity. Future research, particularly long-term randomized studies, is required to further refine treatment protocols and improve patient outcomes. Full article

Smile aesthetics are increasingly prioritized in dental practice, with accurate orthodontic assessment and treatment planning being crucial for optimal outcomes. This study evaluates Invisalign^® SmileView™ (SV), an AI-based tool that simulates post-treatment smiles, focusing on its ability to present potential orthodontic outcomes to patients. Background/Objectives: This research aims to study whether SV can simulate predictable orthodontic results and if it makes anatomical modifications to the teeth. Additionally, it will evaluate whether SV displays smiles that conform to the orthodontic criteria described in the literature. Finally, the study will analyze whether the software can align the dental with the facial midline. Methods: A total of 51 subjects were recruited in Madrid, Spain. The operator took a frontal photograph of the subjects with a social smile (T0), following the application’s instructions. Subsequently, the subjects followed the steps to modify their smile (T1), resulting in a new image of the subject with a different smile. The following variables were collected, analyzed, and compared with the standards defined in the literature: smile width, vertical exposure of the maxillary central incisor, width of the maxillary central and lateral incisors, proportion of the maxillary lateral incisor width to the central incisor, anterior gingival exposure level, position of the upper and lower dental midlines relative to the facial midline. Results: 58% of the sample showed dental expansion, with an excessive expansion (>5 mm) observed in 8%. In the maxillary arch, 5.9% of incisors exceeded predictable aligner movement (>1.5 mm), with 3.9% showing excessive extrusion and 2% excessive intrusion. For the lateral incisors, the mesiodistal size was reduced less than 0.5 mm in 31.4% of cases, with excessive interproximal reduction (>0.5 mm) in 5.9%. Additionally, 62.7% of cases would require multidisciplinary treatment due to an increase in size. SV centered the upper midline in 77.9% of these cases. Among the sample, the upper midline was initially centered in 74.5% of subjects, and SV maintained it centered in 84.2% of these subjects. Conclusions: SV tends to generate simulations of broader smiles, which are mostly achievable through aligner treatments, from an orthodontic perspective, and showed high predictability regarding the vertical movements of the incisors that can be achieved with aligners. Moreover, it adjusted the mesiodistal size of the upper incisors in its simulations and demonstrated the ability to identify and correct deviations of the dental midlines relative to the facial midline. Full article

The smile is a characteristic that expresses emotions and affects interpersonal relationships, significantly impacting self-esteem and influencing personal and professional life. The growing emphasis on aesthetics has made patients increasingly well-informed and demanding regarding available procedures. Excessive gingival display (EGD) can result from various factors, such as altered passive eruption, vertical maxillary excess, and short or hyperactive upper lip, among others. In this case report, where EGD was caused by upper lip hypermobility, the proposed treatment involved the modified lip repositioning surgical technique (MLRS) using sutures in the modified horizontal mattress technique, aiming to limit muscle and tissue movement and to approximate the mucosal edges. The outcome was an improved aesthetic harmony of the smile, with a more suitable position of the upper lip during spontaneous smiling, as observed in a six-month follow-up. Full article

Background: The aim of this study was to propose a new 3D printing method for attachment production and compare the reproduction accuracy of traditional attachments with the proposed 3D-printed attachments. Methods: A standardized 3D model attachment was created with the dimensions of 3, 2, and 2 mm for the apico-coronal, mesio-distal, and vestibulo-lingual dimensions, respectively. A 3D ideal model of the maxillary arch was used to apply four standardized attachments on the vestibular surface of selected teeth. The obtained model with placed attachments was used to reproduce composite attachments via the conventional method. A transfer template was used to bond with the flow composite resin 3D-printed attachment on a new arch model without attachments. The models with traditional attachments and 3D-printed attachments were scanned and overlapped with the original CAD model with attachments. To assess the attachment precision, vertical and horizontal cutting planes were used on the overlapped models. The outcome selection focused on puff analysis (excess composite material evaluation) and shape analysis (attachment accuracy evaluation). Results: The results indicated that the 3D-printed attachments showed significant differences (p < 0.05) compared to the traditional attachments. The descriptive statistics showed the higher discrepancies compared to the CAD model of the traditionally created attachments in the shape (0.85 mm) and puff dimension (1.02 mm). Conclusion: Custom 3D-printed attachment production is an effective method for achieving greater attachment precision. Full article

Background: Excessive gingival display or “gummy smile” is a clinical condition where a maxillary gum shows between the inferior line of the superior lip and the gingival line of the incisive superior during a spontaneous smile. The aim of this research was to understand the various skeletal and dentoalveolar components contributing to a gummy smile in a sample of 120 patients. Material and Methods: This retrospective case-control study had the primary objectives of analyzing the existence of a correlation between the presence of gingival exposure and the alteration of the inclination of the upper incisors with respect to the Frankfurt plane, the Palatine plane (bi-spinal) and to the NA line in a sample of orthodontic patients, and also evaluating the association with skeletal, dental, and aesthetic cephalometric parameters. Result and Conclusions: In our study, it’s emerged a correlation between the gingival exposure and the presence of alterations to incisal torque in the vestibular direction and the quantity of maxillary gingiva evident during the smile, which is correlated in particular to the Is–Sts distance, overjet and overbite. The major indicative data, therefore, are related to the vertical position of the upper incisors, in particular with respect to the upper lip and to the sagittal position. Full article

Purpose: In recent years, a method for improving gummy smiles in adults using an orthodontic anchor screw has been reported, but there is yet to be a treatment for the gummy smiles of those in the growth period. Methods: We improved the gummy smiles of three class II patients with vertical excessive growth of the upper jaw, during their growth period, using a simple bite jumping appliance (SBJA) and a high pull J-hook headgear. Results: It was found that SBJA promoted mandibular growth and the high-pull J-hook headgear inhibited the vertical growth of the maxillary anterior teeth. Conclusion: It is suggested that a combined use of high-pull J-hook headgear and SBJA is an effective way of improving gummy smiles in class II patients with vertical excessive growth of the upper jaw during their growth period. Full article

Background and Objectives: The long face type is associated with excessive vertical facial growth and most often with anterior open bite. In many cases of anterior open bite of high severity associated with bimaxillary dento-alveolar protrusion, lips are unable to form an adequate seal at rest. This leads to many issues, including facial dysmorphism. The aim of this study was to describe the case of a 15 year old girl who addressed the orthodontist in November 2015, having complaints related to the skeletal and dental open bite. Case Description: A 15.7 year old patient required a consultation with the orthodontic service for impaired dento-facial aesthetics at rest, smile and speech due to an exaggerated superior protrusion of the upper frontal teeth, labial incompetence with excessive gingival exposure at rest and smile associated with upper and lower anterior teeth crowding. The orthodontic diagnostic consisted of skeletal open bite with a hyperleptoprosop morphological facial type, high degree of hyperdivergence, bimaxillary dento-alveolar protrusion, 7 mm skeletal open-bite, 3 mm vertical inocclusion of the anterior teeth, skeletal class II relationships, bilateral half cusp class II molar and canine relationships, labial incompetence, highly increased interlabial gap, facial asymmetry, excessive gingival exposure of 7 mm at smiling and bimaxillary anterior crowding. Because the patient initially refused orthognathic surgery, prior to starting the orthodontic treatment, the patient was recommended to receive a bilateral extraction of the first upper premolars. Key objectives of pre-surgical orthodontic treatment were to achieve a retroclined position of the upper incisors under their normal inclination for the planned upward maxillary rotation, to maintain slightly lower incisor proclination. The orthognathic surgery consisted of Le Fort I impaction osteotomy with 8 mm anterior impactation, bilateral sagittal split osteotomy, and mandibular repositioning using occlusal splint. Conclusions: At the end of the orthodontic-surgical treatment, the patient presented significant improvement in dento-facial aesthetics, and optimal skeletal, muscular and dental balance. Full article

The purpose of this clinical study is to evaluate the safety and preliminary efficacy of autologous freeze-drying platelet-rich plasma (FD-PRP) on bone regeneration in maxillary sinus floor augmentation as a preliminary pilot study. Five patients that required sinus floor augmentation to facilitate the placement of dental implants participated in this clinical study. The PRP was prepared from the autologous peripheral blood and was lyophilized and stored at −20 °C for 4 weeks before surgery. At surgery, triple-concentrated FD-PRP (x3FD-PRP) mixed with synthetic bone grafting materials was rehydrated following the transplantation into the sinus floor. The primary outcome was a safety verification of x3FD-PRP, evaluated in terms of the clinical course and consecutive blood tests. The secondary outcome was clinical efficacy focused on bone regeneration in sinus floor augmentation evaluated by radiographic examination and implant stability. There were no adverse events, such as systemic complications, excessive inflammatory reactions, severe infection, or local site healing complications, besides those on the usual course associated with surgery. Vertical augmented height was maintained, and the initial stability of implants was achieved post-operatively in 6 months. The results obtained in this study suggest that x3FD-PRP can be used safely for bone engineering in clinical practice. Further studies are required to draw a conclusion concerning the efficacy of x3FD-PRP since this was a pilot study with a single arm and a small sample size. Full article

Reconstruction of mandibular defects following tumor resection in infants is a particular challenge. Although autogenous rib grafts have no relevance in the restoration of mandibular bone defects occurring after ablative tumor surgery due to limited bone stock and the availability of other donor areas, they are a useful surgical alternative following tumor surgery in infants. We here report on a 2, 5, 8, and 15-year follow-up of four children who were diagnosed with benign tumors of the mandible with osseous destruction at the age of 4, 6, 15, and 18 months, respectively. Histologic diagnoses were melanotic neuroectodermal tumor (n = 2), hemangioendothelioma of the mandible (n = 1), and ameloblastoma (n = 1). Following continuity resection of the mandible, lateromandibular bone defects were restored using autogenous rib grafts. Both clinical and radiologic follow-up visits were performed for all children to assess growth of the facial skeleton and the mandible. One child was already further reconstructed using bone augmentation at the age of 15 years. Cephalometric measurements on panorex films and three-dimensional computed tomographic scans revealed a slight vertical growth excess and transversal growth inhibition of the reconstructed mandible compared with the nonoperated side. Although further growth of rib grafts is difficult to predict and occlusal disharmony may occur due to physiologic maxillary growth and growth of the unaffected mandible, we believe that autogenous rib grafts can be ideally used for the restoration of mandibular continuity defects in newborns and young children. Clinical follow-up visits on a yearly basis and orthodontic controls are useful for early orthodontic treatment of growth deficits. Further corrective surgery with bone augmentation or osseous distraction is required following completion of growth of the facial skeleton. Full article