Search Results (8)

Arthropod-borne infectious diseases cause many deaths and a major economic burden worldwide. Repellents play an important role in protecting people from infectious biting arthropods. The repellency of veratraldehyde, a known food additive, and the WJ-1041 formulation containing 10% veratraldehyde was tested against Aedes albopictus and Culex pipiens pallens females and Haemaphysalis longicornis nymphs using arm-in-cage, indoor or filter paper tests. Veratraldehyde exhibited repellency similar to or lower than that of n,n-diethyl-meta-toluamide (DEET) against A. albopictus, but in H. longicornis, the activity of veratraldehyde was better than that of DEET. The repellency of the 10% veratraldehyde solution was comparable to that of 20% DEET against the two mosquitoes. When comparing repellency between the WJ-1041 formulation (10% veratraldehyde) and 10% DEET against C. pipiens pallens, A. Albopictus and H. longicornis, the two showed similar repellency and complete protection time (CPT) values. However, there was a small difference depending on the tested insects. The absorption of veratraldehyde via skin was minimal, if at all. The pharmacokinetic parameters (C_max and T_max) of veratraldehyde in blood samples of rats were not different from those of the control group. Based on these results, veratraldehyde has high potential to be commercialized as a repellent agent against infectious disease-borne pests in the near future. Full article

In the present work, the polyphenolic profile of a complex matrix such as Amontillado sherry has been processed by means of high-speed counter-current chromatography (HSCCC) and characterized by HPLC-DAD-MS. An Amberlite XAD-7 column was used to obtain the wine extract, and three different biphasic solvent systems were applied for HSCCC separation: MTBE (methyl tert-butyl ether)/n-butanol/acetonitrile/water (1.1/3/1.1/5+0.1% trifluoroacetic acid), MTBE/n-butanol/acetonitrile/water (2/2/1/5), and hexane/ethyl acetate/ethanol/water (1/5/1/5). As a result, 42 phenolic compounds and furanic derivatives have been identified by means of HPLC-DAD-MS, with 11 of them being identified for the first time in Sherry wines: 3-feruloylquinic acid, isovanillin, ethyl vanillate, furoic acid, dihydro-p-coumaric acid, 6-O-feruloylglucose, ethyl gallate, hydroxytyrosol, methyl protocatechuate, homoveratric acid and veratraldehyde. In addition, the antioxidant capacity (ABTS) of the obtained fractions was determined, revealing higher values in those fractions in which compounds such as gallic acid, protocatechuic acid, protocatechualdehyde, trans-caftaric acid, syringic acid, isovanillin or tyrosol, among others, were present. This is the first time that HSCCC has been used to characterize the phenolic composition of Sherry wines. Full article

The UV absorption spectra of six structurally related derivatives of anisole and veratrole, i.e., anisaldehyde, (E)-anethole, estragole, veratraldehyde, methyleugenol and (E)-methylisoeugenol, were recorded at various concentrations of the anionic surfactants, either sodium lauryl sulfate (SLS) or sodium lauryl ether sulfate (SLES) at T = 298 K. In addition, conductivity and density measurements were made for the SLS and SLES solutions to determine the volumetric properties of the studied surfactants. Next, using the W. Al-Soufi, L. Pińeiro and M. Novo model (APN model) including the pseudo-phase model for micellar solubilization, the values of micelle-water partition coefficients for each perfume-surfactant system were determined. In addition, the relations between the molecular structures of the solute and the head group of the surfactant and the value of the micelle-water partition coefficient as well as the octanol-water one were discussed. Full article

A simple, sensitive, and rapid UHPLC-MS/MS method was developed for the simultaneous determination of veratraldehyde and its metabolite veratric acid in rat plasma. Cinnamaldehyde was used as an internal standard (IS) and the one-step protein precipitation method with 0.2% formic acid in acetonitrile (mobile phase B) was used for the sample extraction. Reversed C18 column (YMC-Triart C18 column, 50 mm × 2.0 mm, 1.9 µm) was used for chromatographic separation and was maintained at 30 °C. The total run time was 4.5 min and the electrospray ionization in positive mode was used with the transition m/z 167.07 → 139.00 for veratraldehyde, m/z 183.07 → 139.00 for veratric acid, and m/z 133.00 → 55.00 for IS. The developed method exhibited good linearity (r²  ≥  0.9977), and the lower limits of quantification ranged from 3 to 10 ng/mL for the two analytes. Intra-day precision and accuracy parameters met the criteria (within ±15%) during the validation. The bioanalytical method was applied for the determination of veratraldehyde and veratric acid in rat plasma after oral and percutaneous administration of 300 and 600 mg/kg veratraldehyde. Using the analytical methods established in this study, we can confirm the absorption and metabolism of veratraldehyde in rats for various routes. Full article

The selective oxidation of veratryl alcohol as lignin-derived compound was studied under mild conditions, using Au-Cu catalysts synthesized from pre-formed nanoparticles with different Au:Cu molar ratios. Bimetallic catalysts show higher activity compared to monometallic counterparts, highlighting a clear synergistic effect. By comparing the physico-chemical surface properties of catalysts supported on carbon and Al₂O₃, we were able to establish a strong support effect, with alumina-based catalysts being more active than carbon-supported ones. Moreover, TEM and X-ray photoelectron spectroscopy (XPS) analyses showed a different composition of nanoparticles (NPs) and metal exposure, and we established that Au is the active phase of the reaction. The co-presence of Au and Cu species, and their different interaction with the support, enabled obtaining more than 70% conversion of veratryl alcohol to veratryl aldehyde as a unique product. Moreover, the Au₁Cu₁ supported on alumina catalyst was recovered by filtration and reused without significant loss of activity and selectivity up to four times. Full article

The selective oxidation of veratryl alcohol (VA), a model compound of lignin, with oxygen molecules to produce veratraldehyde (VAld) was studied over monometallic Au, Pd, and bimetallic Au:Pd nanoparticles supported on a Ce_0.62Zr_0.38O₂ mixed oxide for the first time. These bimetallic Au-Pd catalysts with Au:Pd molar ratios from 0.4 to 4.3 were synthesized by the sol-immobilization method. Furthermore, all the catalysts were characterized by inductively coupled plasma-atomic emission spectroscopy (ICP-AES), N₂ physisorption, X-ray photoelectron spectroscopy (XPS), scanning transmission electron microscopy-high angle annular dark field (STEM-HAADF) imaging, energy dispersive X-ray spectroscopy (EDXS), and temperature programmed reduction (TPR) techniques. A synergistic effect between gold and palladium was observed over all the bimetallic catalysts in a wide range of studied Au:Pd ratios. Remarkably, the optimum Au:Pd ratio for this reaction was 1.4 with a turnover frequency of almost six times larger than for the monometallic gold and palladium catalysts. Selectivity to veratraldehyde was higher than 99% for the monometallic Au, Pd, and all the bimetallic Au-Pd catalysts, and stayed constant during the reaction time. Full article

Lignin peroxidase (LiP) is an important enzyme for degrading aromatic hydrocarbons not only in nature but also in industry. In the presence of H₂O₂, this enzyme can easily decompose lignin and analogue compounds under mild conditions. In this reaction mechanism, LiP catalyzes the C–C cleavage of a propenyl side chain, being able to produce veratraldehyde (VAD) from 1-(3′,4′-dimethoxyphenyl) propene (DMPP). One of the few and complete proposed mechanisms includes several non-enzymatic reactions. In this study, we performed a computational study to gain insight about the non-enzymatic steps involved in the reaction mechanism of VAD formation from DMPP using LiP as a catalyst. A kinetic characterization of the reaction using the reaction force and the reaction force constant concepts within the density functional theory (DFT) framework is proposed. All theoretical calculations for the reaction pathway were performed using the Minnesota Global Hybrid functional M06-2X and a 6-31++G(d,p) basis set. The complete reaction comprises seven steps (five steps not including LiP as a catalyst), which include radical species formation, bond transformation, water and oxygen addition, atom reordering, and deacetylation. The overall mechanism is an endothermic process with mixed activation energies depending on the four transition states. These results are the first attempt to fully understand the catalytic role of LiP in the degradation of lignin and its aromatic derivative compounds in terms of the electronic structure methods and future hybrid calculation approaches that we have recently been performing. Full article

Kraft pulp has to be bleached to eliminate the chromophoric structures, which cause a darkening of the pulp. In Nature, an equivalent role is assumed by ligninolytic enzymes such as lignin peroxidases, manganese peroxidases and laccases. The development of low molecular weight manganese peroxidase mimics may achieve environmentally-safe bleaching catalysts for the industry. Herein we report the synthesis and characterization of six manganese(III) complexes 1–6, incorporating dianionic hexadentate Schiff base ligands (H₂L¹-H₂L⁴) and different anions. Complex 4, Mn₂L²₂(H₂O)₂(DCA)₂ was crystallographically characterized. Complexes 1–4 behave as more efficient mimics of peroxidase in contrast to 5–6. We have studied the use of these complexes as catalysts for the degradation of the lignin model compound veratryl alcohol. The biomimetic catalysts were used in conjunction with chlorine-free inexpensive co-oxidants as dioxygen or hydrogen peroxide. Yields up to 30% of veratryl alcohol conversion to veratraldehyde have been achieved at room temperature in presence of air flow using 0.5% of catalyst. Full article