Search Results (979)

The environmental challenges posed by global warming have significantly increased the global pursuit of renewable and clean energy sources. Among these, solar energy stands out due to its abundance, renewability, low environmental impact, and favorable long-term economic viability. However, its intermittent nature and dependence on weather conditions hinder consistent and efficient utilization. To address these limitations, nanoparticle-enhanced phase change materials (NPCMs) have emerged as a promising solution for enhancing thermal energy storage in solar thermal systems. NPCMs incorporate superior-performance nanoparticles within traditional phase change material matrices, resulting in improved thermal conductivity, energy storage density, and phase change efficiency. This review systematically examines the recent advances in NPCMs for solar energy applications, covering their classification, structural characteristics, advantages, and limitations. It also explores in-depth analytical approaches, including mechanism-oriented analysis, simulation-based modelling, and algorithm-driven optimization, that explain the behavior of NPCMs at micro and macro scales. Furthermore, the techno-economic implications of NPCM integration are evaluated, with particular attention to cost-benefit analysis, policy incentives, and market growth potential, which collectively support broader adoption. Overall, the findings highlight NPCMs as a frontier in materials innovation and enabling technology for achieving low-carbon, environmentally responsible energy solutions, contributing significantly to global sustainable development goals. Full article

This study investigates the electro-thermal transient response of a photovoltaic–thermal (PV/T)–heat pump system under dynamic disturbances to optimize operational stability. A dynamic model integrating a PV/T collector and a heat pump was developed by the transient heat current method, enabling high-fidelity simulations of step perturbations: solar irradiance reduction, compressor operation, condenser water flow rate variations, and thermal storage tank volume changes. This study highlights the thermal storage tank’s critical role. For V_tank = 2 m³, water tank volume significantly suppresses the water tank and PV/T collector temperature fluctuations caused by solar irradiance reduction. PV/T collector temperature fluctuation suppression improved by 46.7%. For the PV/T heat pump system in this study, the water tank volume was selected between 1 and 1.5 m³ to optimize the balance of thermal inertia and cost. Despite PV cell electrical efficiency gains from PV cell temperature reductions caused by solar irradiance reduction, power recovery remains limited. Compressor dynamic performance exhibits asymmetry: the hot water temperature drop caused by speed reduction exceeds the rise from speed increase. Load fluctuations reveal heightened risk: load reduction triggers a hot water 7.6 °C decline versus a 2.2 °C gain under equivalent load increases. Meanwhile, water flow rate variation in condenser identifies electro-thermal time lags (100 s thermal and 50 s electrical stabilization), necessitating predictive compressor control to prevent temperature and compressor operation oscillations caused by system condition changes. These findings advance hybrid renewable systems by resolving transient coupling mechanisms and enhancing operational resilience, offering actionable strategies for PV/T–heat pump deployment in building energy applications. Full article

As energy systems transition toward high shares of variable renewable generation, local energy communities (ECs) are increasingly relevant for enabling demand-side flexibility and self-sufficiency. This shift is particularly evident in the residential sector, where the deployment of photovoltaic (PV) systems is rapidly growing. While mixed-integer linear programming (MILP) remains the standard for operational optimization and demand response in such systems, its computational burden limits scalability and responsiveness under real-time or uncertain conditions. Reinforcement learning (RL), by contrast, offers a model-free, adaptive alternative. However, its application to real-world energy system operation remains limited. This study explores the application of a Deep Q-Network (DQN) to a real residential EC, which has received limited attention in prior work. The system comprises three single-family homes sharing a centralized heating system with a thermal energy storage (TES), a PV installation, and a grid connection. We compare the performance of MILP and RL controllers across economic and environmental metrics. Relative to a reference scenario without TES, MILP and RL reduce energy costs by 10.06% and 8.78%, respectively, and both approaches yield lower total energy consumption and CO₂-equivalent emissions. Notably, the trained RL agent achieves a near-optimal outcome while requiring only 22% of the MILP’s computation time. These results demonstrate that DQNs can offer a computationally efficient and practically viable alternative to MILP for real-time control in residential energy systems. Full article

Energy harvesting (EH) is a rapidly evolving domain that is primarily focused on capturing and converting ambient energy sources into more convenient and usable forms. These sources, which range from traditional renewable sources such as solar or wind power to thermal gradients and vibrations, present an alternative to typical power generation. The temptation to use energy harvesting systems is in their potential to power low-power devices, such as environment monitoring devices, without relying on conventional power grids or standard battery implementations. This improves the sustainability and self-sufficiency of IoT devices and reduces the environmental impact of conventional power systems. Applications of EH include wearable health monitors, wireless sensor networks, and remote structural sensors, where frequent battery replacement is impractical. However, these systems also face challenges such as intermittent energy availability, limited storage capacity, and low power density, which require innovative design approaches and efficient energy management. The paper provides a general overview of the subsystems present in the energy harvesting systems and a comprehensive overview of the energy transducer technologies used in energy harvesting systems. Full article

This study investigates the energy consumption characteristics of individual and clustered thermal storage electric heating systems, focusing on their sustainability implications for regional load distribution and user energy consumption patterns. Simulation results show that thermal storage electric heating shifts peak energy demand from daytime to nighttime low-price hours, reducing electricity costs and optimizing grid load balancing. As the proportion of thermal storage electric heating increases from 10% to 30%, the daytime minimum load reduction rate rises from 7% to 22%, while the nighttime maximum load increase rate increases from 16% to 63%. This operational mode supports sustainable energy usage by alleviating daytime grid peak pressure and leveraging low-cost, off-peak electricity for heat storage. The findings highlight the potential of thermal storage electric heating to enhance energy efficiency, integrate renewable energy, and promote grid stability, contributing to a more sustainable energy system. Full article

Spacecraft and satellites are equipped with cryogenic storage systems to maintain instruments and engines at optimal operating temperatures. However, in cryogenic storage tanks, the steep temperature gradient along the pipeline (arising from sections inside and outside the tank) may induce instability in stored gases such as helium or hydrogen, leading to large-amplitude, self-excited thermoacoustic oscillations, known as Taconis oscillations. Taconis oscillations not only cause structural damage to pipelines, jeopardizing the safety of the cryogenic storage system, but also produce significant heat leakage and boil-off losses of cryogens. This study employs computational fluid dynamics (CFD) to simulate Taconis oscillations within a U-shaped cryogenic helium pipeline. The flow dynamics and acoustic field characteristics of the cryogenic helium pipeline are first analyzed. Fast Fourier transform and wavelet transform are employed to characterize the Taconis oscillations. A subsequent parametric study investigates the influence of the location and magnitude of temperature gradients on the dynamic behavior of Taconis oscillations. Simulation results reveal that the onset temperature gradient is at a minimum when the temperature gradient is applied at one-quarter of the cryogenic pipeline. To prevent the occurrence of Taconis oscillations, the transition between the warm and cold sections should be away from one-quarter of the cryogenic helium pipe. Moreover, increasing the temperature gradient leads to the emergence of multiple oscillation modes and an upward shift in their natural frequencies. This research gives deeper insights into the dynamics of thermally induced thermoacoustic oscillations in cryogenic pipelines, providing guidelines for improving the efficiency and safety of cryogenic storage systems in aerospace engineering. Full article

Energy shortage and environmental pollution have accelerated the adoption of lithium-ion batteries (LIBs) as efficient energy storage solutions. However, their performance and safety challenges under extreme temperatures highlight the urgent need for effective temperature control during charging and discharging, making a comprehensive understanding of electrochemical and thermal behaviors crucial. This paper develops a 3D electrochemical–thermal coupled model for 150 Ah lithium iron phosphate (LFP) batteries to investigate thermal behavior at varying charge–discharge rates. An integrated learning regression prediction system, incorporating a structured vector autoregression (SVAR) model, is subsequently proposed to analyze the interactions among multiple electrochemical and thermal variables. The temperature difference exceeds 5 °C at higher charging rates (1.3C, 1.5C), driven primarily by accelerated heat generation—especially reversible heat. Complex interactions exist between electrochemical and thermal parameters. When charging at 0.5C, voltage, current density, battery capacity, and the maximum temperature difference (MTD) are all significantly and positively correlated (p < 0.001). Under 1C discharge conditions, voltage exhibits a strong positive correlation with most thermal characteristic variables, and correlation coefficients across different operating conditions range from −0.9731 to 0.973. Finally, the proposed ensemble learning system exhibits excellent prediction accuracy, strong generalization, and robust trend analysis, with practical guiding value. Full article

Date palm (Phoenix dactylifera L.) is a vital crop cultivated primarily in developing regions, playing a strategic role in global food security through its significant contribution to nutrition, economy, and livelihoods. Global and regional production trends revealed increasing demand and expanded cultivation areas, underpinning the fruit’s importance in national food security policies and economic frameworks. The date fruit’s rich nutritional profile, encompassing carbohydrates, dietary fiber, minerals, and bioactive compounds, supports its status as a functional food with health benefits. Postharvest technologies and quality preservation strategies, including temperature-controlled storage, advanced drying, edible coatings, and emerging AI-driven monitoring systems, are critical to reducing losses and maintaining quality across diverse cultivars and maturity stages. Processing techniques such as drying, irradiation, and cold plasma distinctly influence sugar composition, texture, polyphenol retention, and sensory acceptance, with cultivar- and stage-specific responses guiding optimization efforts. The cold chain and innovative packaging solutions, including vacuum and modified atmosphere packaging, along with biopolymer-based edible coatings, enhance storage efficiency and microbial safety, though economic and practical constraints remain, especially for smallholders. Microbial contamination, a major challenge in date fruit storage and export, is addressed through integrated preservation approaches combining thermal, non-thermal, and biopreservative treatment. However, gaps in microbial safety data, mycotoxin evaluation, and regulatory harmonization hinder broader application. Date fruit derivatives such as flesh, syrup, seeds, press cake, pomace, and vinegar offer versatile functional roles across food systems. They improve nutritional value, sensory qualities, and shelf life in bakery, dairy, meat, and beverage products while supporting sustainable waste valorization. Emerging secondary derivatives like powders and extracts further expand the potential for clean-label, health-promoting applications. This comprehensive review underscores the need for multidisciplinary research and development to advance sustainable production, postharvest management, and value-added utilization of date palm fruits, fostering enhanced food security, economic benefits, and consumer health worldwide. Full article

Solar thermal technology is an important component of low-carbon energy systems, but its application potential is constrained by two key factors: the inherent limits of energy flux density and the temporal mismatch between supply and demand. This study examined efficiency losses in building heating systems in Northwest China caused by the mismatch between supply and demand in intermittent solar thermal storage systems. Three typical building heating models (Day–Night Intermittent Mode, Day–Night + Monthly Intermittent Mode, and Composite Intermittent Mode (Day–Night + Weekly + Monthly)) were constructed through SketchUp, integrating the Transient System Simulation Tool (TRNSYS) with improved calculation methods in an innovative way. The study first examined regional energy consumption patterns and the temporal characteristics of building occupancy and then proposed a collaborative optimization framework for thermal collection and storage, focused on improving the dynamic matching algorithm of the thermal collection area ratio and the tank volume ratio and establishing a tank capacity calculation model that considers the time-varying characteristics of heat demand and fluctuations in thermal collection efficiency during the intermittent heating cycle. The results show that compared with continuous operation, the intermittent strategy reduces the annual cumulative heat load by 13–33%, among which the Day–Night Intermittent Mode shows the daily peak load reaches 1.8 times the normal value during restart, while the daily fluctuation amplitude of the Day–Night + Monthly Intermittent Mode decreases by 42%. The corresponding solar energy guarantee rate reaches 86–88%, and the heat storage loss is reduced by 19–27%. The time-varying coupling design method established in this study provides an optimization path that takes into account both system efficiency and economy for intermittent heating scenarios. The proposed dynamic capacity configuration criterion has universal guiding value for the design of solar district heating systems. Full article

To achieve energy conservation, emission reduction, and green low-carbon goals for gas storage facilities, it is crucial to efficiently recover and utilize waste heat during gas injection while maintaining natural gas cooling rates. However, existing sensible and latent heat storage technologies cannot sustain long-term thermal storage or seasonal utilization of waste heat. Thermal chemical energy storage, with its high energy density and low thermal loss during prolonged storage, offers an effective solution for efficient recovery and long-term storage of waste heat in gas storage facilities. This study proposes a novel heat recovery method by combining a moving bed with mixed hydrated salts (CaCl₂·6H₂O and MgSO₄·7H₂O). By constructing both small-scale and full-scale three-dimensional models in Fluent, which couple the desorption and endothermic processes of hydrated salts, the study analyzes the temperature and flow fields within the moving bed during heat exchange, thereby verifying the feasibility of this approach. Furthermore, the effects of key parameters, including the inlet temperatures of hydrated salt particles and natural gas, flow velocity, and mass flow ratio on critical performance indicators such as the outlet temperatures of natural gas and hydrated salts, the overall heat transfer coefficient, the waste heat recovery efficiency, and the mass fraction of hydrated salt desorption are systematically investigated. The results indicate that in the small-scale model (1164 × 312 × 49 mm) the outlet temperatures of natural gas and mixed hydrated salts are 79.8 °C and 49.3 °C, respectively, with a waste heat recovery efficiency of only 33.6%. This low recovery rate is primarily due to the insufficient residence time of high-velocity natural gas (10.5 m·s⁻¹) and hydrated salt particles (2 mm·s⁻¹) in the moving bed, which limits heat exchange efficiency. In contrast, the full-scale moving bed (3000 × 1500 × 90 mm) not only accounts for variations in natural gas inlet temperature during the three-stage compression process but also allows for optimized operational adjustments. These optimizations ensure a natural gas outlet temperature of 41.3 °C, a hydrated salt outlet temperature of 82.5 °C, a significantly improved waste heat recovery efficiency of 94.2%, and a hydrated salt desorption mass fraction of 69.2%. This configuration enhances the safety of the gas injection system while maximizing both natural gas waste heat recovery and the efficient utilization of mixed hydrated salts. These findings provide essential theoretical guidance and data support for the effective recovery and seasonal utilization of waste heat in gas storage reservoirs. Full article

Low thermal conductivity of phase change materials (PCMs) remains a major limitation in the design of efficient thermal energy storage systems. Enhancing the thermal performance of PCM storage units is therefore a critical design consideration. Fin geometry plays a pivotal role in improving the heat charging and discharging rates by influencing heat transfer mechanisms, particularly natural convection during melting. This study presents a two-dimensional numerical investigation of novel fin geometries aimed at accelerating the melting process of PCM in a double-pipe heat exchanger. Four fin designs are examined: single-step thickness reduction, double-step thickness reduction, stepwise thickness reduction/expansion, and smooth thickness reduction fins. These configurations are specifically developed to promote natural convection currents in the molten PCM regions adjacent to the fin’s surfaces. The enthalpy–porosity method is employed using ANSYS Fluent 19 to simulate the phase change process. The COUPLED algorithm is used for pressure–velocity coupling, with the PRESTO! scheme applied for pressure interpolation and a second-order upwind scheme adopted for the discretization of transport equations. The results demonstrate that the proposed thickness reduction fins significantly enhance the PCM melting rate by intensifying natural convection currents, driven by localized temperature gradients along the fin surfaces. Full article

The global rise of electric vehicles (EVs) is reshaping the automotive industry, driven by a 25% increase in EV sales in 2024 and mounting regulatory pressure from European countries aiming to phase out thermal and hybrid vehicle production. In this context, the development of advanced battery technologies has become a critical priority. However, progress in electrochemical storage systems remains limited due to persistent technological barriers such as gaps in data, inadequate modeling tools, and difficulties in system integration, such as thermal management and interface instability. Safety concerns like thermal runaway and the lack of long-term performance data also hinder large-scale adoption. This study presents an in-depth analysis of lithium–ion (Li–ion) batteries, with a particular focus on evaluating their charging and discharging behaviors. To facilitate this, a series of automated experiments was conducted using a custom-built test bench equipped with MATLAB (2024b) programming and dSPACE data acquisition cards, enabling precise current and voltage measurements. The acquired data were analyzed to derive mathematical models that capture the operational characteristics of Li–ion batteries. Furthermore, various state-of-charge (SoC) estimation techniques were investigated to enhance battery efficiency and improve range management in EVs. This paper contributes to the advancement of energy storage technologies and supports global ecological goals by proposing safer and more efficient solutions for the electric mobility sector. Full article

In the field of advanced electrical energy conversion and storage, remarkable attention has been given to the development of new, more sustainable electrolytes. In this regard, the combination of redox shuttles with aqueous bio-polymer gels seems to be a valid alternative via which to overcome the typical drawbacks of common liquid electrolytes such as corrosion, volatility or leakage. Despite the promising results obtained so far, redox-active species such as bis(6,6′-dimethyl-2,2′-bipyridine)copper(I) trifluoromethanesulfonylimide, ([Cu(I)(dmby)₂]TFSI), still present inherent challenges associated with their poor water solubility and oxidative lability, which prevents their employment in cheap and sustainable aqueous electrolytes. The present study investigates the stabilization of the Cu(I) complex ([Cu(I)(dmby)₂]TFSI) within two natural hydrogels based on the biopolymers κ-carrageenan and galactomannan, using ZnO nanoparticles as gelling agents. These eco-friendly and biocompatible systems are proposed as potential matrices for quasi-solid electrolytes (QSEs), offering a promising platform for advanced electrolyte design in electrochemical applications. Both hydrogels effectively stabilized and retained the redox species within their networks. In order to shed light on distinct stabilization mechanisms, complementary FTIR and SEM analyses were relevant to reveal the structural rearrangements, specific to each matrix, upon complex incorporation. Furthermore, thermogravimetric analysis confirmed notable thermal resilience in both systems, with the galactomannan-based gel demonstrating enhanced performance. Altogether, this work introduces a novel strategy for embedding copper-based redox couples into gelled electrolytes, paving the way toward their integration in real electrochemical devices, where long-term stability, redox retention, and energy conversion efficiency are critical evaluation criteria. Full article

Transitioning to sustainable energy systems demands the creation of innovative methods that deliver dependable and effective renewable energy technologies. CSP systems that integrate parabolic trough designs with thermal energy storage (TES) systems provide essential solutions to overcome energy intermittency challenges. Molten salts serve dual functions as heat transfer fluids (HTFs) and thermal energy storage (TES) media, making them critical to CSP system performance improvements. The study introduces a hybrid MCDM framework that combines the CRITIC method for objective weighting with the SWARA approach for expert-adjusted weighting and utilizes an enhanced Lexicographic Goal Programming to evaluate molten salt options for off-grid parabolic trough systems. The evaluation process considered melting point alongside thermal stability while also assessing cost-effectiveness, recyclability, and safety requirements. The use of Pareto front analysis helped identify non-dominated salts, which then underwent a tiered optimization process emphasizing safety, performance, and sustainability features. Results confirm that the ternary nitrate composition Ca(NO₃)₂:NaNO₃:KNO₃ offers the best overall performance across all tested policy scenarios, driven by its superior thermophysical properties. Solar Salt (NaNO₃-KNO₃) consistently ranks as a robust second choice, excelling in economic and sustainability metrics. The proposed approach provides a flexible, policy-sensitive framework for material selection tailored to enhance the efficiency and sustainability of off-grid CSP systems and support the renewable energy objectives. Full article

This review article examines the corrosion phenomena and mitigation strategies associated with molten salts used in thermal energy storage (TES) and heat transfer applications. Corrosion presents a critical challenge in concentrated solar power (CSP) plants and other high-temperature systems, affecting the durability and cost-efficiency of materials in storage tanks, heat exchangers, and piping. This study offers a comprehensive comparison of corrosion test methods and results, analyzing factors such as operating conditions, salt compositions, and material properties. Emphasis is also placed on strategies such as molten salt purification, the addition of corrosion inhibitors, and the application of protective coatings. This review aims to advance research and development in the TES sector by highlighting knowledge gaps and proposing directions for future experimentation. Full article