Search Results (10)

Incorrect sitting posture, characterized by asymmetrical or uneven positioning of the body, often leads to spinal misalignment and muscle tone imbalance. The prolonged maintenance of such postures can adversely impact well-being and contribute to the development of spinal deformities and musculoskeletal disorders. In response, smart sensing chairs equipped with cutting-edge sensor technologies have been introduced as a viable solution for the real-time detection, classification, and monitoring of sitting postures, aiming to mitigate the risk of musculoskeletal disorders and promote overall health. This comprehensive literature review evaluates the current body of research on smart sensing chairs, with a specific focus on the strategies used for posture detection and classification and the effectiveness of different sensor technologies. A meticulous search across MDPI, IEEE, Google Scholar, Scopus, and PubMed databases yielded 39 pertinent studies that utilized non-invasive methods for posture monitoring. The analysis revealed that Force Sensing Resistors (FSRs) are the predominant sensors utilized for posture detection, whereas Convolutional Neural Networks (CNNs) and Artificial Neural Networks (ANNs) are the leading machine learning models for posture classification. However, it was observed that CNNs and ANNs do not outperform traditional statistical models in terms of classification accuracy due to the constrained size and lack of diversity within training datasets. These datasets often fail to comprehensively represent the array of human body shapes and musculoskeletal configurations. Moreover, this review identifies a significant gap in the evaluation of user feedback mechanisms, essential for alerting users to their sitting posture and facilitating corrective adjustments. Full article

The rise of the Internet of Things (IoT) has enabled the development of measurement systems dedicated to preventing health issues and monitoring conditions in smart homes and workplaces. IoT systems can support monitoring people doing computer-based work and avoid the insurgence of common musculoskeletal disorders related to the persistence of incorrect sitting postures during work hours. This work proposes a low-cost IoT measurement system for monitoring the sitting posture symmetry and generating a visual alert to warn the worker when an asymmetric position is detected. The system employs four force sensing resistors (FSR) embedded in a cushion and a microcontroller-based read-out circuit for monitoring the pressure exerted on the chair seat. Java-based software performs the real-time monitoring of the sensors’ measurements and implements an uncertainty-driven asymmetry detection algorithm. The shifts from a symmetric to an asymmetric posture and vice versa generate and close a pop-up warning message, respectively. In this way, the user is promptly notified when an asymmetric posture is detected and invited to adjust the sitting position. Every position shift is recorded in a web database for further analysis of the sitting behavior. Full article

In recent years, employment in sedentary occupations has continuously risen. Office workers are more prone to prolonged static sitting, spending 65–80% of work hours sitting, increasing risks for multiple health problems, including cardiovascular diseases and musculoskeletal disorders. These adverse health effects lead to decreased productivity, increased absenteeism and health care costs. However, lack of regulation targeting these issues has oftentimes left them unattended. This article proposes a smart chair system, with posture and electrocardiography (ECG) monitoring modules, using an “invisible” sensing approach, to optimize working conditions, without hindering everyday tasks. For posture classification, machine learning models were trained and tested with datasets composed by center of mass coordinates in the seat plane, computed from the weight measured by load cells fixed under the seat. Models were trained and evaluated in the classification of five and seven sitting positions, achieving high accuracy results for all five-class models (>97.4%), and good results for some seven-class models, particularly the best performing k-NN model (87.5%). For ECG monitoring, signals were acquired at the armrests covered with conductive nappa, connected to a single-lead sensor. Following signal filtering and segmentation, several outlier detection methods were applied to remove extremely noisy segments with mislabeled R-peaks, but only DBSCAN showed satisfactory results for the ECG segmentation performance (88.21%) and accuracy (90.50%). Full article

The method of using millimeter-wave radar sensors to detect human vital signs, namely respiration and heart rate, has received widespread attention in non-contact monitoring. These sensors are compact, lightweight, and able to sense and detect various scenarios. However, it still faces serious problems of noisy interference in hardware, which leads to a low signal-to-noise ratio (SNR). We used a frequency-modulated continuous wave (FMCW) radar sensor operating at 77 GHz in an office environment to extract the respiration and heart rate of a person accustomed to sitting in a chair. Indeed, the proposed signal processing includes novel impulse denoising operations and the spectral estimation decision method, which are unique in terms of noise reduction and accuracy improvement. In addition, the proposed method provides high-quality, repeatable respiration and heart rates with relative errors of 1.33% and 1.96% on average compared with the reference values measured by a reliable smart bracelet. Full article

This research aims at contributing to a seamless, integrated technology intelligent living system for solitary older adults at home. The capacitive intimate sensing module, that can be easily pasted to the existing home space element surfaces, daily objects, or home furniture, such as a wall, door, stairs, a chair, cabinet, table, sofa, etc, is developed in this research. This 30 × 30 cm sensing module can actively sense people’s physical behaviors and body movements in spaces. The signals acquired from the sensing modules in indoor spaces will then integrate into the controller system through the IoT application and logically define the behavior classification. From the preliminary analysis of observing the 80-year-old elderly subject’s daily activities, the movement trajectory of the ‘Move–Stop’ pattern is found. There will be a touch (T) and a touchless (TL) relationship between the body and the space elements or objects. The touchless or non-contact intimate relationship also can be divided into two types: 1. the body ‘Passes by’ (P) the spatial elements or objects, and 2. the body ‘Stays’ (S) in front of the object and performs activities. This research pasted eight sensing modules on nine objects in six spaces. Finally, the specific actions and life pattern can be recognized and analyzed through the developed IoT spatial behavior smart system and provide the customized intelligent application function for the elderly. Full article

We present a solution for intelligent posture training based on accurate, real-time sitting posture monitoring using the LifeChair IoT cushion and supervised machine learning from pressure sensing and user body data. We demonstrate our system’s performance in sitting posture and seated stretch recognition tasks with over 98.82% accuracy in recognizing 15 different sitting postures and 97.94% in recognizing six seated stretches. We also show that user BMI divergence significantly affects posture recognition accuracy using machine learning. We validate our method’s performance in five different real-world workplace environments and discuss training strategies for the machine learning models. Finally, we propose the first smart posture data-driven stretch recommendation system in alignment with physiotherapy standards. Full article

The paper aims to study the applicability and limitations of the solution resulting from a design process for an intelligent system supporting people with special needs who are not physically able to control a wheelchair using classical systems. The intelligent system uses information from smart sensors and offers a control system that replaces the use of a joystick. The necessary movements of the chair in the environment can be determined by an intelligent vision system analyzing the direction of the patient’s gaze and point of view, as well as the actions of the head. In this approach, an important task is to detect the destination target in the 3D workspace. This solution has been evaluated, outdoor and indoor, under different lighting conditions. In order to design the intelligent wheelchair, and because sometimes people with special needs also have specific problems with their optical system (e.g., strabismus, Nystagmus) the system was tested on different subjects, some of them wearing eyeglasses. During the design process of the intelligent system, all the tests involving human subjects were performed in accordance with specific rules of medical security and ethics. In this sense, the process was supervised by a company specialized in health activities that involve people with special needs. The main results and findings are as follows: validation of the proposed solution for all indoor lightning conditions; methodology to create personal profiles, used to improve the HMI efficiency and to adapt it to each subject needs; a primary evaluation and validation for the use of personal profiles in real life, indoor conditions. The conclusion is that the proposed solution can be used for persons who are not physically able to control a wheelchair using classical systems, having with minor vision deficiencies or major vision impairment affecting one of the eyes. Full article

This paper proposes a microcontroller-based measurement system to detect and confirm the presence of a subject in a chair. The system relies on a single Force Sensing Resistor (FSR), which is arranged in the seat of the chair, that undergoes a sudden resistance change when a subject/object is seated/placed over the chair. In order to distinguish between a subject and an inanimate object, the system also monitors small-signal variations of the FSR resistance caused by respiration. These resistance variations are then directly measured by a low-cost general-purpose microcontroller unit (MCU) without using either an analogue processing stage or an analogue-to-digital converter. Two versions of such a MCU-based circuit are presented: one to prove the concept of the measurement, and another with a smart wake-up (generated by the sudden resistance change) intended to reduce the energy consumption. The feasibility of the proposed measurement system is experimentally demonstrated with subjects of different weight sitting at different postures, and also with objects of different weight. The MCU-based circuit with a smart wake-up shows a standby current consumption of 800 nA, and requires an energy of 125 µJ to carry out the measurement after the wake-up. Full article

The LifeChair is a smart cushion that provides vibrotactile feedback by actively sensing and classifying sitting postures to encourage upright posture and reduce slouching. The key component of the LifeChair is our novel conductive fabric pressure sensing array. Fabric sensors have been explored in the past, but a full sensing solution for embedded real world use has not been proposed. We have designed our system with commercial use in mind, and as a result, it has a high focus on manufacturability, cost-effectiveness and adaptiveness. We demonstrate the performance of our fabric sensing system by installing it into the LifeChair and comparing its posture detection accuracy with our previous study that implemented a conventional flexible printed PCB-sensing system. In this study, it is shown that the LifeChair can detect all 11 postures across 20 participants with an improved average accuracy of 98.1%, and it demonstrates significantly lower variance when interfacing with different users. We also conduct a performance study with 10 participants to evaluate the effectiveness of the LifeChair device in improving upright posture and reducing slouching. Our performance study demonstrates that the LifeChair is effective in encouraging users to sit upright with an increase of 68.1% in time spent seated upright when vibrotactile feedback is activated. Full article

Medical healthcare is one of the fascinating applications using Internet of Things (IoTs). The pervasive smart environment in IoTs has the potential to monitor various human activities by deploying smart devices. In our pilot study, we look at narcolepsy, a disorder in which individuals lose the ability to regulate their sleep-wake cycle. An imbalance in the brain chemical called orexin makes the sleep pattern irregular. This sleep disorder in patients suffering from narcolepsy results in them experience irrepressible sleep episodes while performing daily routine activities. This study presents a novel method for detecting sleep attacks or sleepiness due to immune system attacks and affecting daily activities measured using the S-band sensing technique. The S-Band sensing technique is channel sensing based on frequency spectrum sensing using the orthogonal frequency division multiplexing transmission at a 2 to 4 GHz frequency range leveraging amplitude and calibrated phase information of different frequencies obtained using wireless devices such as card, and omni-directional antenna. Each human behavior induces a unique channel information (CI) signature contained in amplitude and phase information. By linearly transforming raw phase measurements into calibrated phase information, we ascertain phase coherence. Classification and validation of various human activities such as walking, sitting on a chair, push-ups, and narcolepsy sleep episodes are done using support vector machine, K-nearest neighbor, and random forest algorithms. The measurement and evaluation were carried out several times with classification values of accuracy, precision, recall, specificity, Kappa, and F-measure of more than 90% that were achieved when delineating sleep attacks. Full article