Search Results (7)

In the production of clad rolled plates from asymmetric sandwich-type slab for pipeline applications, achieving both target mechanical properties and high geometric flatness remains a critical challenge due to differential thermal stresses between the dissimilar steel layers during accelerated cooling. This study aims to develop an optimal cooling schedule for a 25 mm thick clad plate, comprising a X70-grade steel base layer and an AISI 316L cladding, to ensure required strength and minimal bending. A comprehensive approach was employed, integrating a 3D finite element model (Ansys) for simulating thermoelastic stresses with a CatBoost machine learning model trained on industrial data to predict heat transfer coefficients accurately. A parametric analysis of cooling strategies was conducted. Results showed that a standard cooling strategy caused unacceptable bending of plate after cooling exceeding 130 mm. An optimized strategy featuring delayed activation of the lower cooling headers (on the cladding side) created a compensating thermoelastic moment, successfully reducing bending to approximately 20 mm while maintaining the base layer’s requisite mechanical properties. The findings validate the efficacy of the combined FEM-machine learning methodology and propose a viable, industrially implementable cooling strategy for high-quality clad plate production. Full article

Background: Total neoadjuvant therapy (TNT) has emerged as a promising strategy for locally advanced rectal cancer (LARC). By administering both chemoradiotherapy (CRT) and systemic chemotherapy (CHT) pre-surgery, TNT is associated with improved disease-free survival (DFS), reduced distant metastases, and higher pathological complete response (pCR) rates. Materials and Methods: This study included patients with LARC who received various TNT schedules: induction chemotherapy (iCHT), consolidation chemotherapy (cCHT), or a combination of both (sandwichCHT). We analyzed treatment adherence, toxicity, and pathological response. Local and distant disease recurrence, as well as survival outcomes, were also evaluated. Results: Between May 2021 and January 2025, 70 patients received TNT. Treatment included iCHT (41%), sandwichCHT (49%), and cCHT (10%). Most patients (94%) received long-course radiotherapy (LCRT). Overall, TNT was well tolerated, with grade 2 gastrointestinal toxicity during CRT being the most common frequent adverse event (33%). Disease progression during TNT was noted in five patients (7%); three of these patients were receiving chemotherapy, while two underwent surgical resection of the primary tumor. A watch-and-wait strategy was adopted for five patients (7%) following TNT. Surgical procedures performed included anterior resection (92%), abdominoperineal resection (7%), and local excision (1%). Pathological assessment revealed an overall pCR rate of 30%. With a median follow-up of 17 months, no patients experienced local recurrence. Post-surgery, 10 patients (17%) developed disease progression. The median DFS was 14.7 months. Five patients (7%) died during the follow-up period, with only one death attributed to causes other than disease progression. Conclusions: In this cohort of LARC patients, TNT demonstrated favorable tolerability and encouraging short-term efficacy. Full article

Background: To date, in breast cancer (BC) treatment, adjuvant chemotherapy (A-CT) has preceded adjuvant radiotherapy (A-RT). In the last twenty years, the adjuvant treatment of BC has quickly evolved due to better knowledge of its molecular biology, genetic profile, and α/β ratio of 3/4 Gy for tumor and normal tissue radiosensitivity. Thus, new schedules with hypofractionated radiotherapy have been tested, and a third generation of A-CT has been introduced, raising the question of whether it is time to rethink the sequencing between these two approaches. Methods: In the last 20 years, many attempts have been made worldwide to optimize the best sequencing strategy between these two approaches in terms of sequential CT-RT and RT-CT and concomitant and sandwich modalities using drugs and schedules. This paper presents a comprehensive review of the state of the art, analyzing all the available studies to assess the sequencing between A-CT and A-RT with different generations of chemotherapy schedules. Results: More than 8000 patients from 30 studies treated with adjuvant chemotherapy and whole breast radiotherapy who were enrolled in randomized, retrospective, and prospective studies were analyzed. Sequential, concomitant, and sandwich modalities of chemotherapy with conventional or hypofractionated RT schedules from the most important studies were included. The most used sequence was adjuvant chemotherapy followed by conventional or hypofractionated radiotherapy. In the concomitant approach, i.v. CMF has been the most important adopted schedule, while the concomitant use of anthracyclines and taxanes with conventional or hypofractionated radiotherapy has been found to be more toxic. One study analyzed the benefit in terms of reducing adjuvant treatment time with upfront hypofractionated radiotherapy and third-generation chemotherapy. Conclusions: At present, the best sequencing strategy has not yet been defined. This comprehensive review is a journey among the most important randomized, retrospective, and prospective studies that highlights the past, current, and novel time sequencing proposals between A-CT and A-RT to assess the state of the art and provide useful information for future adjuvant approaches in breast cancer treatment. Full article

Background: This is a retrospective analysis of the results of treatment for varicose veins using the sandwich technique with cyanoacrylate glue and foam sclerotherapy. This novel method allows for a substantial reduction in the amount of glue needed for vein closure, and minimizes the risk of granuloma formation and allergic reaction related to the epifascial administration of cyanoacrylate. Methods: This technique was used in 60 patients, 77 intrafascial veins were managed. Vein closures were performed with Venex cyanoacrylate glue and 1–3% polidocanol foam. All procedures were performed under ultrasonographic control, through direct percutaneous punctures of target veins. Follow-ups were scheduled 1–3 weeks after the procedure. If revealed, unclosed segments of the target veins were obliterated at these follow-up visits, with glue and/or sclerotherapy. Results: There were no serious adverse events intra- or postprocedurally. The technical success rate was 100%. The primary success rate at 1–3 weeks follow-up was 84.4%. The primary assisted success rate, after additional closures, was 100%. Conclusions: We demonstrated that the treatment for varicose veins, using a sandwich technique, which combines cyanoacrylate glue and foam sclerotherapy, can be safe and efficient. Full article

(1) Background: In intermediate–high- and high-risk endometrial cancer (EC), radiotherapy (RT) and chemotherapy (CT) play a basic role. However, there is controversy regarding the optimal timing of their combination. The “sandwich” schedule involves adjuvant CT followed by RT and subsequent CT. The aim of this study is to assess the tolerability and efficacy of the “sandwich” schedule. (2) Methods: A retrospective study was conducted in two gynecological oncology units in Torino, Italy, from 1 January 2003 until 31 December 2021. Intermediate–high- and high-risk patients with available clinical data were included. Compliance with treatment, CT and RT toxicities, disease-free survival (DFS), cancer-specific survival (CSS) and overall survival (OS) were analyzed. (3) Results: A total of 118 patients were selected: 27.1% FIGO I-II stages and 72.9% III-IV. Most of the patients (75.4%) received a carboplatin–paclitaxel combination, and as much as 94.9% of CT cycles were completed. Chemotherapy-related G3-4 toxicities were detected in 5.3% of the patients, almost half of which were hematological. Grade 2 gastrointestinal and genitourinary toxicities were reported in 8.4% and 4.2% of cases, respectively. With a median follow-up of 46 months, DFS was 77.6%, CSS was 70% and 5-year OS was 54%. (4) Conclusions: The “sandwich” schedule for CT and RT combination is an effective adjuvant treatment with low toxicity both in intermediate–high- and high-risk EC. Full article

Obesity is a growing public health problem worldwide. Bariatric surgical procedures achieve the most sustainable and efficacious outcomes in the treatment of morbid obesity. However, little is known about the underlying molecular pathways modulated by these surgical interventions. Since leptin resistance is implicated in the pathogenesis of obesity, we herein report the effects of laparoscopic sleeve gastrectomy (LSG) on the serum levels of leptin and leptin receptor, in addition to its overall effect on leptin resistance. This was an interventional and follow-up clinical study. In the first part, patients attending the general surgery outpatient clinics at our university hospital were first stratified according to their Body-Mass Index (BMI) into cases (n = 38) with BMI ≥ 35 who were scheduled to undergo LSG, and controls (n = 75) with a normal BMI. Serum leptin and leptin receptor levels were measured by sandwich ELISA technique. A leptin resistance index was estimated by adjusting leptin to BMI ratio to leptin receptor concentration. In the second part of the study, cases who underwent LSG were followed up one year postoperatively to assess their BMI and serum leptin and leptin receptor levels. Leptin to BMI ratio was significantly higher, while serum leptin receptor was significantly lower, in obese patients compared to controls. This translated into a significantly higher leptin resistance index in obese patients. LSG resulted in a significant reduction of BMI, leptin to BMI ratio, and leptin resistance index, as it significantly increased leptin receptor levels. In conclusion, LSG showed significant decrease in leptin resistance in obese patients after one year. Further studies are needed to determine the clinical impact of this finding on LSG outcomes. Full article

Controls of a PEM fuel cell stack are one of the crucial issues for securing efficient and durable operations of the stack. When the air is excessively supplied, the efficiency of the system drops. Conversely, insufficient supply of the air causes oxygen starvation at a dynamically varying load. In particular, proper cooling strategy ensures rejecting heat produced and prevents any thermal stress on thin layers of cells. Excessive cooling decreases the working temperature and consequently drops efficiency of the stack. In contrast, the thermal stress imposed by insufficient cooling may reduce the lifespan of the layers.
Design of controls needs a model for the plant that sufficiently represents its dynamics. Current models available are either empirical or computationally intensive, which do not allow for analysis of a stack behavior and associated controls. The paper addresses development of a high dynamic model for a stack that is based on transport of charges, flow of fuels and byproducts taken into temperature effects. The stack is constructed with single cells composed of sandwiched multiple layers that are thermally and electrically coupled. Air is supplied by a blower, which voltage is regulated. Two representing control strategies for the air supply system are designed and compared. Heat is rejected by a thermal circuit that consists of a pump, a three-way valve, and a radiator with a fan and a reservoir. In order to control the coolant flow rate, a linear cascade and a state feedback control are designed and compared, which includes a feed-forward function that is derived from load profile. In addition, the temperature effect on air flow rate is compensated, so that a deviation of the oxygen excess ratio can be suppressed.
The dynamics and performance of the designed controllers are evaluated and analyzed by simulations using dynamic fuel cell system models at a multi-step current and a current profile measured at the Federal Urban Driving Schedule. The results show that the control strategy proposed reduces not only temperature rise in the catalyst layer but also the parasitic power needed for operation of the air and coolant pumps maintaining the oxygen excess ratio set. Full article