Search Results (8)

Hydrothermal alteration mapping is considered as a widely adopted step in the mineral exploration of numerous ore deposits. In this work, the wavelength mapping and relative absorption band depth (RBD) method were applied to map hydrothermal alterations in a site from the abandoned mine of Idikel, western Anti-Atlas, Morocco. Fe²⁺/Fe³⁺, Al-OH, and Mg-Fe-OH/CO₃ hydrothermal alteration minerals were targeted based on HyMap airborne imaging spectroscopy data. Using the wavelength mapping approach, the 900 to 1205 nm, 2094 to 2217 nm, and 2264 to 2318 nm ranges were selected to map Fe²⁺/Fe³⁺, Al-OH, and Mg-Fe-OH/CO₃ absorption features, respectively. By carefully selecting these spectral ranges, the study aimed to achieve the accurate and reliable mapping of hydrothermal alteration features. The highest interpolated depth of Al-OH features was matched with a major cluster of pixels at 2200 nm. The highest interpolated depth of Mg-Fe-OH/CO₃ was depicted at 2300 nm. The highest interpolated depth of Fe²⁺/Fe³⁺ was depicted between 900 and 1000. The relative absorption band depth method was also applied to enhance the detectability of hydrothermal alteration minerals. This method involves assessing the depth of the absorption bands associated with the target minerals, allowing for a detailed characterization of the alteration features. The combination of both wavelength mapping and enhancement methods contributed to a comprehensive and robust hydrothermal alteration mapping process. The identification of Fe²⁺/Fe³⁺, Al-OH, and Mg-Fe-OH/CO₃ manifestations provided valuable insights into potential mineralization zones within the study area. Overall, this research contributes to the advancement of hydrothermal alteration mapping using hyperspectral data by selecting the required HyMap bands for mapping targeted alterations. The combination of wavelength mapping and enhancement methods proves to be a powerful approach for accurately identifying and characterizing hydrothermal alteration features using specific hyperspectral channels. The findings from this study can aid future mineral exploration endeavors in similar geological settings, providing valuable guidance for locating potential mineral resources in mountainous and challenging terrains. Full article

Numerous reports have successfully detected or differentiated carbonate minerals such as calcite and dolomite by using the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER). However, there is a need to determine whether existing methods can differentiate magnesite from other carbonate minerals. This study proposes optimal band ratio combinations and new thresholds to distinguish magnesite, dolomite, and calcite using ASTER shortwave-infrared (SWIR) data. These were determined based on the spectral and chemical analysis of rock samples collected from Liaoning, China and Danchon, North Korea and the reflectance values from ASTER images. The results demonstrated that the simultaneous use of thresholds 2.13 and 2.015 for relative absorption band depths (RBDs) of (6 + 8)/7 and (7 + 9)/8, respectively, was the most effective for magnesite differentiation. The use of RBDs and band ratios to discriminate between dolomite and calcite was sufficiently effective. However, talc, tremolite, clay, and their mixtures with dolomite and calcite, which are commonly found in the study area, hampered the classification. The assessment of the ASTER band ratios for magnesite grade according to magnesium oxide content indicated that a band ratio of 5/6 was the most effective for this purpose. Therefore, this study proved that ASTER SWIR data can be effectively utilized for the identification and grade assessment of magnesite on a regional scale. Full article

The application of machine learning (ML) algorithms for processing remote sensing data is momentous, particularly for mapping hydrothermal alteration zones associated with porphyry copper deposits. The unsupervised Dirichlet Process (DP) and the supervised Support Vector Machine (SVM) techniques can be executed for mapping hydrothermal alteration zones associated with porphyry copper deposits. The main objective of this investigation is to practice an algorithm that can accurately model the best training data as input for supervised methods such as SVM. For this purpose, the Zefreh porphyry copper deposit located in the Urumieh-Dokhtar Magmatic Arc (UDMA) of central Iran was selected and used as training data. Initially, using ASTER data, different alteration zones of the Zefreh porphyry copper deposit were detected by Band Ratio, Relative Band Depth (RBD), Linear Spectral Unmixing (LSU), Spectral Feature Fitting (SFF), and Orthogonal Subspace Projection (OSP) techniques. Then, using the DP method, the exact extent of each alteration was determined. Finally, the detected alterations were used as training data to identify similar alteration zones in full scene of ASTER using SVM and Spectral Angle Mapper (SAM) methods. Several high potential zones were identified in the study area. Field surveys and laboratory analysis were used to validate the image processing results. This investigation demonstrates that the application of the SVM algorithm for mapping hydrothermal alteration zones associated with porphyry copper deposits is broadly applicable to ASTER data and can be used for prospectivity mapping in many metallogenic provinces around the world. Full article

In this research, airborne geophysical and remote sensing datasets were integrated for gold potentiality mapping (GPM) over the Atalla area in Central Eastern Desert, Egypt. Utilizing aeromagnetic data, detailed structural complexity maps were constructed using the center for exploration targeting (CET) procedure. Then, spectrometric gamma-ray data primarily located hydrothermally altered tracts with discriminating various rock units. The latter are precisely outlined by implementing various techniques (false-color composite (FCC), band ratio (BR), relative absorption band depth (RBD), directed principal component analysis (DPCA), and constrained energy minimization (CEM)) to ASTER, Sentinel 2 and ALOS PRISM datasets, with reference to the geological maps. The study exhibits that gold mineralization is structurally controlled by NW-SE direction. The findings of structural complexity and hydrothermal alteration (argillic, advanced argillic, phyllic, and propylitic) were used as weighted inputs for contouring gold potentiality. The resultant GPM accentuated five gold-promising zones; two are confirmed via locations of ancient gold mines, while the remaining three zones are strongly recommended for their gold potentiality. Full article

Multi-stage intrusive complex mapping plays an important role in regional mineralization research. The similarity of lithology characteristics between different stages of intrusions necessitates the use of richer spectral bands, while higher spatial resolution is also essential in small-scale research. In this paper, a multi-source remote sensing data application method was proposed. This method includes a spectral synergy process based on statistical regression and a fusion process using Gram–Schmidt (GS) spectral sharpening. We applied the method with Gaofen-2 (GF2), Sentinel-2, and Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) data to the mapping of the Mountain Sanfeng intrusive complex in northwest China in which Carboniferous intrusions have been proven to be directly related to the formation of Au deposits in the area. The band ratio (BR) and relative absorption band depth (RBD) were employed to enhance the spectral differences between two stage intrusions, and the Red-Green-Blue (RGB) false colour of the BR and RBD enhancement images performed well in the west and centre. Excellent enhancement results were obtained by making full use of all bands of the synergistic image and using the Band Ratio Matrix (BRM)-Principal Component Analysis (PCA) method in the northeast part of the study area. A crucial improvement in enhancement performance by the GS fusion process and spectral synergy process was thus shown. An accurate mapping result was obtained at the Mountain Sanfeng intrusive complex. This method could support small-scale regional geological survey and mineralization research in this region. Full article

Mapping hydrothermal alteration minerals using multispectral remote sensing satellite imagery provides vital information for the exploration of porphyry and epithermal ore mineralizations. The Ahar-Arasbaran region, NW Iran, contains a variety of porphyry, skarn and epithermal ore deposits. Gold mineralization occurs in the form of epithermal veins and veinlets, which is associated with hydrothermal alteration zones. Thus, the identification of hydrothermal alteration zones is one of the key indicators for targeting new prospective zones of epithermal gold mineralization in the Ahar-Arasbaran region. In this study, Landsat Enhanced Thematic Mapper+ (Landsat-7 ETM+), Landsat-8 and Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) multispectral remote sensing datasets were processed to detect hydrothermal alteration zones associated with epithermal gold mineralization in the Ahar-Arasbaran region. Band ratio techniques and principal component analysis (PCA) were applied on Landsat-7 ETM+ and Landsat-8 data to map hydrothermal alteration zones. Advanced argillic, argillic-phyllic, propylitic and hydrous silica alteration zones were detected and discriminated by implementing band ratio, relative absorption band depth (RBD) and selective PCA to ASTER data. Subsequently, the Bayesian network classifier was used to synthesize the thematic layers of hydrothermal alteration zones. A mineral potential map was generated by the Bayesian network classifier, which shows several new prospective zones of epithermal gold mineralization in the Ahar-Arasbaran region. Besides, comprehensive field surveying and laboratory analysis were conducted to verify the remote sensing results and mineral potential map produced by the Bayesian network classifier. A good rate of agreement with field and laboratory data is achieved for remote sensing results and consequential mineral potential map. It is recommended that the Bayesian network classifier can be broadly used as a valuable model for fusing multi-sensor remote sensing results to generate mineral potential map for reconnaissance stages of epithermal gold exploration in the Ahar-Arasbaran region and other analogous metallogenic provinces around the world. Full article

Satellite-based multi-sensor data coupled with field and microscopic investigations are used to unravel the setting and controls of gold mineralization in the Wadi Beitan–Wadi Rahaba area in the South Eastern Desert of Egypt. The satellite-based multispectral and Synthetic Aperture Radar (SAR) data promoted a vibrant litho-tectonic understanding and abetted in assessing the regional structural control of the scattered gold occurrences in the study area. The herein detailed approach includes band rationing, principal component and independent component analyses, directional filtering, and automated and semi-automated lineament extraction techniques to Landsat 8- Operational Land Imager (OLI), Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER), Phased Array L-band Synthetic Aperture Radar (PALSAR), and Sentinel-1B data. Results of optical and SAR data processed as grayscale raster images of band ratios, Relative Absorption Band Depth (RBD), and (mafic–carbonate–hydrous) mineralogical indices are used to extract the representative pixels (regions of interest). The extracted pixels are then converted to vector shape files and are finally imported into the ArcMap environment. Similarly, manually and automatically extracted lineaments are merged with the band ratios and mineralogical indices vector layers. The data fusion approach used herein reveals no particular spatial association between gold occurrences and certain lithological units, but shows a preferential distribution of gold–quartz veins in zones of chlorite–epidote alteration overlapping with high-density intersections of lineaments. Structural features including en-echelon arrays of quartz veins and intense recrystallization and sub-grain development textures are consistent with vein formation and gold deposition syn-kinematic with the host shear zones. The mineralized, central-shear quartz veins, and the associated strong stretching lineation affirm vein formation amid stress build-up and stress relaxation of an enduring oblique convergence (assigned as Najd-related sinistral transpression; ~640–610 Ma). As the main outcome of this research, we present a priority map with zones defined as high potential targets for undiscovered gold resources. Full article

The contrast in the emissivity spectra of phosphorite and associated carbonate rock can be used as a guide to delineate phosphorite within dolomite. The thermal emissivity spectrum of phosphorite is characterized by a strong doublet emissivity feature with their absorption minima at 9 µm and 9.5 µm; whereas, host rock dolomite has relatively subdued emissivity minima at ~9 µm. Using the contrast in the emissivity spectra of phosphorite and dolomite, data obtained by the thermal bands of Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) sensor were processed to delineate phosphorite within dolomite. A decorrelation stretched ASTER radiance composite could not enhance phosphorite rich zones within the dolomite host rock. However, a decorrelation stretched image composite of selected emissivity bands derived using the emissivity normalization method was suitable to enhance large surface exposures of phosphorite. We have found that the depth of the emissivity minima of phosphorite gradually has increased from dolomite to high-grade phosphorite, while low-grade phosphate has an intermediate emissivity value and the emissivity feature can be studied using three thermal bands of ASTER. In this context, we also propose a relative band depth (RBD) image using selected emissivity bands (bands 11, 12, and 13) to delineate phosphorite from the host rock. We also propose that the RBD image can be used as a proxy to estimate the relative grades of phosphorites, provided the surface exposures of phosphorite are large enough to subdue the role of intrapixel spectral mixing, which can also influence the depth of the diagnostic feature along with the grade. We have validated the phosphorite pixels of the RBD image in the field by carrying out colorimetric analysis to confirm the presence of phosphorite. The result of the study indicates the utility of the proposed relative band depth image derived using ASTER TIR bands for delineating Proterozoic carbonate-hosted phosphorite. Full article