Search Results (3)

The green chemistry method for nanocatalyst synthesis along with environmentally feasible non-edible sources are promising alternatives to fossil fuels. The current study focuses on the synthesis of copper oxide phyto-nanocatalyst and the identification of a new renewable feedstock, Citrullus colocynthis, to reduce environmental pollution. The highest biodiesel yield (95%) was obtained under optimum conditions of a 1:8 oil-to-methanol ratio and reaction temperature of 85 °C for 120 min with a 0.365 wt% catalyst concentration. The phyto-nanocatalyst was synthesized using seed oil cake after extracting oil with the salt of copper (copper oxide). The catalyst was then subjected to various analyses, namely, EDX, FT-IR, SEM, and XRD. The catalyst was proved to be efficient and effective after being reused five times and still there was a very small difference in biodiesel yield. All the analyses also show sustainable and stable results. Thus, copper oxide phyto-nanocatalyst with non-edible Citrullus colocynthis proved to be highly effective, sustainable, and a better alternative source to the future biodiesel industry. Full article

The current study focuses on the synthesis of Cerium oxide (CeO₂) nanocatalyst via Tragacanth Gum (TG) using the wet impregnation method and its application for sustainable biodiesel production from a novel, non-edible Descurainia sophia (L.) Webb ex Prantl seed oil. The D. sophia seed oil has higher oil content (36 wt%) and free fatty acid (FFA) value (0.6 mg KOH/g). Innovative analytical methods, such as X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray (EDX), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), and Fourier transform infrared spectroscopy, were used to characterize the newly synthesized, environmentally friendly, and recyclable CeO₂-TG phytonanocatalyst (FT-IR). The results show that the CeO₂-TG phytonanocatalyst was 22 nm in diameter with a spherical shape outer morphology, while the inner structure was hexagonal. Due to low FFA content, the D. sophia seed oil was pretreated and transesterified via a single step. Using varying parameters, the optimized process variables were determined via Response Surface Methodology (RSM). The optimum process values were 8:1 methanol to oil molar ratio, 0.3 wt% catalyst concentration, 90 °C temperature, and reaction time of 210 min with 98% biodiesel yield. The recently created phytonanocatalyst was reliable and effective, with three times reusability in the transesterification reaction. Thin layer chromatography (TLC), FT-IR, gas chromatography–mass spectroscopy (GCMS), and Nuclear magnetic resonance (NMR) analyses were used to characterize the synthesized biodiesel. Physico-chemical properties of D. sophia biodiesel, i.e., Kinematic viscosity (4.23 mm²/s), density (0.800 kg/m³), pour point (−7 °C), cloud point (−12 °C), and flash point (73.5 °C) agree well with international biodiesel standards (ASTM-6751, 951), (EU-14214), and China (GB/T 20828) standards. The results show that the synthesized nanocatalyst demonstrated remarkable stability, indicating a bright future for industrial biodiesel production from low-cost feedstock. Full article

Catalysis represents the cornerstone of chemistry, since catalytic processes are ubiquitous in almost all chemical processes developed for obtaining consumer goods. Nanocatalysis represents nowadays an innovative approach to obtain better properties for the catalysts: stable activity, good selectivity, easy to recover, and the possibility to be reused. Over the last few years, for the obtaining of new catalysts, classical methods—based on potential hazardous reagents—have been replaced with new methods emerged by replacing those reagents with plant extracts obtained in different conditions. Due to being diversified in morphology and chemical composition, these materials have different properties and applications, representing a promising area of research. In this context, the present review focuses on the metallic nanocatalysts’ importance, different methods of synthesis with emphasis to the natural compounds used as support, characterization techniques, parameters involved in tailoring the composition, size and shape of nanoparticles and applications in catalysis. This review presents some examples of green nanocatalysts, grouped considering their nature (mono- and bi-metallic nanoparticles, metallic oxides, sulfides, chlorides, and other complex catalysts). Full article