Search Results (6)

The hybrid unmanned aerial vehicle combines the vertical take-off and landing and hover abilities of rotary-wing UAVs with the high-speed cruise and long-endurance capabilities of fixed-wing UAVs, expanding the flight envelope and application areas. The designed controller must handle the highly nonlinear dynamics and variable actuators resulting from this combination. Furthermore, the performance of the controller is also influenced by uncertainties in model parameters and external disturbances. To address these issues, a unified robust disturbance rejection control based on fixed-time stability theory is proposed for attitude control. A fixed-time disturbance observer is utilized to estimate composite disturbances without some strict assumptions. Based on this observer, a nonsingular chattering-free fixed-time integral sliding mode control law is introduced to ensure that tracking errors converge to the origin within a fixed time. In addition, an optimized control allocator based on the weighted least squares method is designed to handle the overactuation of a dual-system hybrid UAV. Finally, numerical simulations and hardware-in-the-loop experiments under different flight modes and disturbance conditions are carried out, and compared with nonlinear dynamic inverse and the nonsingular terminal sliding mode control based on a finite-time observer, the developed controller enhances attitude angle tracking accuracy and disturbance rejection performance. Full article

This paper focuses on the modeling, control, and simulation of an over-actuated hexacopter tilt-rotor (HTR). This configuration implies that two of the six actuators are independently tilted using servomotors, which provide high maneuverability and reliability. This approach is predicted to maintain zero pitch throughout the trajectory and is expected to improve the aircraft’s steering accuracy. This arrangement is particularly beneficial for precision agriculture (PA) applications where accurate monitoring and management of crops are critical. The enhanced maneuverability allows for precise navigation in complex vineyard environments, enabling the unmanned aerial vehicle (UAV) to perform tasks such as aerial imaging and crop health monitoring. The employed control architecture consists of cascaded proportional (P)-proportional, integral and derivative (PID) controllers using the successive loop closure (SLC) method on the five controlled degrees of freedom (DoFs). Simulated results using Gazebo demonstrate that the HTR achieves stability and maneuverability throughout the flight path, significantly improving precision agriculture practices. Furthermore, a comparison of the HTR with a traditional hexacopter validates the proposed approach. Full article

It is known that new power transmission line inspection techniques have been developed over the last few years with great potential to improve and, in some cases, even replace traditional inspection procedures such as using helicopters and cars. A series of Unmanned Aerial Vehicles (UAVs) such as fixed-wing or rotary-wing UAVs, and vehicles that climb on the power transmission line, promise to revolutionize the inspection market. In this light, at least 39 new research studies and/or products have been conducted and/or introduced to the market, respectively. However, in an incipient way, some works point to the fusion of some technologies: the development of multi-rotor UAVs and the ability to connect and move over the power transmission line. In line with this, the current work was proposed, with significant unprecedented advances (such as an over-actuated control capacity with tilt rotors, the capability of a displacement in the angle, and the maintenance of active motors on the power transmission line), and the design, modeling, and control of an over-actuated UAV able to move over the conductor cable without the need for a new locomotion system is presented. The aircraft allows for a greater response and the indispensable ability to approximate landing in a power transmission line arbitrary position rather than the catenary lowest point (due to its ability to forward/backward move using the tilting rotors). Its design is detailed, its subsystems are described, and its normal and coupled flight mode dynamics are modeled. The results show good stability and reliable maneuvers for the coupling-to-power-transmission-line flight mode, without any overshoots, and the ability to follow the entire catenary through different Real Control Action (RCA) sets. Full article

Using adaptive dynamic programming (ADP), this paper presents a novel attitude-tracking scheme for over-actuated tailless unmanned aerial vehicles (UAVs) that integrates control and control allocation while accounting for nonlinearity and nonaffine control inputs. The proposed method uses the idea of nonlinear dynamic inversion to create an augmented system and converts the optimal tracking problem into an optimal regulation problem using a discounted performance function. Drawing inspiration from incremental control, this method achieves optimal tracking control for the nonaffine system by simply using a critic-only structure. Moreover, the unique design of the performance function ensures robustness against model uncertainties and external disturbances. The ADP method was found to outperform traditional control architectures that separate control and control allocation, achieving the same level of attitude-tracking performance through a more optimized approach. Furthermore, unlike many recent optimal controllers for nonaffine systems, our method does not require any model identifiers and demonstrates robustness. The superiority of the ADP-based approach is verified through two simulated scenarios, and its internal mechanism is further discussed. The theoretical analysis of robustness and stability is also provided. Full article

In this paper, a nonlinear robust Fast Terminal Sliding Mode Controller (FTSMC) is designed to control and stabilize a new reconfigurable Unmanned Aerial Vehicle (UAV) in the presence of uncertain and variable parameters. The studied UAV is an over-actuated system due the number of actuator control inputs. It can modify the length and the angles between its four arms in different ways, which result an important variation in its Center of Gravity (CoG), inertia, and control matrix. The proposed FTSMC offers many advantages such as, reaching the desired states in a finite-time unlike the conventional sliding mode, robustness vis-a-vis uncertain and unknown parameters, fast convergence towards the sliding surface, high accuracy and reducing the chattering phenomena. Furthermore, the closed-loop stability of the this UAV is ensured by the Lyapunov theory. The eight actuators used to rotate and extend the UAV arms are controlled by simple Proportional Integral Derivative (PID) controllers. Lastly, the robustness and efficiency of the proposed controller are evaluated through a flight scenario, where the UAV geometric parameters are variable over time. Full article

Standard quadcopters are popular largely because of their mechanical simplicity relative to other hovering aircraft, low cost and minimum operator involvement. However, this simplicity imposes fundamental limits on the types of maneuvers possible due to its under-actuation. The dexterity and fault tolerance required for flying in limited spaces like forests and industrial infrastructures dictate the use of a bespoke dual-tilting quadcopter that can launch vertically, performs autonomous flight between adjacent obstacles and is even capable of flying in the event of the failure of one or two motors. This paper proposes an actuation concept to enhance the performance characteristics of the conventional under-actuated quadcopter. The practical formation of this concept is followed by the design, modeling, simulation and prototyping of a dual-axis tilting quadcopter. Outdoor flight tests using tilting rotors, to follow a trajectory containing adjacent obstacles, were conducted in order to compare the flight of conventional quadcopter with the proposed over-actuated vehicle. The results show that the quadcopter with tilting rotors provides more agility and mobility to the vehicle especially in narrow indoor and outdoor infrastructures. Full article