Search Results (7)

This study aimed to address issues related to hydrophilicity, barrier properties, and mechanical performance in starch-based films by incorporating Pickering emulsions stabilized with nano-fibrillated bacterial cellulose (BC). Emulsions were added to the film-forming suspension at varying concentrations (1.0%, 2.5%, 5.0%, and 7.5% v/v) for comparison. The films were evaluated using water vapor permeability (WVP), contact angle, Fourier Transform Infrared Spectroscopy (FTIR), and tensile tests. The results showed a significant reduction in film hydrophilicity, with the contact angle increasing from 49.7° ± 1.5 to 71.0° ± 1.4, and improved water vapor barrier properties, with WVP decreasing from 0.085 ± 0.04 to 0.016 ± 0.01 g·mm/h·m²·kPa. FTIR analysis confirmed the successful incorporation of the emulsion into the starch matrix. Among the tested concentrations, 2.5% provided an optimal balance, increasing hydrophobicity while maintaining mechanical strength. These findings demonstrate that Pickering emulsions are an effective strategy for enhancing the functional properties of starch films. Full article

The dynamic development of the food industry and the growing interest of consumers in innovative solutions that increase the comfort and quality of life push the industry towards seeking pioneering solutions in the field of food packaging. Intelligent and active packaging, which affects the quality and durability of food products and allows one to determine their freshness, is still a modern concept. The aim of our study was to obtain two types of films based on chitosan and starch with micellar nanostructures containing extracts from turmeric rhizomes and hibiscus flowers. The presence of spherical nanostructures was confirmed using a scanning electron microscope. The structural and optical properties of the obtained composites were characterised by Fourier-transform infrared (FTIR), UltraViolet-Visible (UV-VIS), and photoluminescence (PL) spectroscopy. Scanning electron microscopy (SEM) analysis confirmed the presence of spherical micellar structures with a size of about 800 nm in the obtained biocomposites. The presence of nano-/microstructures containing extracts affected the mechanical properties of the composites: it weakened the strength of the films and improved their elongation at break (EAB). Films with nano-/microparticles were characterised by a higher water content compared to the control sample and lower solubility, and they showed stronger hydrophilic properties. Preliminary storage tests showed that the obtained biocomposites are sensitive to changes occurring during the storage of products such as cheese or fish. In addition, it was found that the film with the addition of turmeric extract inhibited the growth of microorganisms during storage. The results suggest that the obtained bionanocomposites can be used as active and/or intelligent materials. Full article

The aim of this study was to develop sago starch-based bionanocomposite films containing TiO₂ nanoparticles and Penganum harmala extract (PE) to increase the shelf life of chicken fillets. First, sago starch films containing different levels of TiO₂ nanoparticles (1, 3, and 5%) and PE (5, 10, and 15%) were prepared. The barrier properties and antibacterial activity of the films against different bacteria strains were investigated. Then, the produced films were used for the chicken fillets packaging, and the physicochemical and antimicrobial properties of fillets were estimated during 12-day storage at 4 °C. The results showed that the addition of nano TiO₂ and PE in the films increased the antibacterial activity against gram-positive (S. aureus) higher than gram-negative (E. coli) bacteria. The water vapor permeability of the films decreased from 2.9 to 1.26 (×10⁻¹¹ g/m·s·Pa) by incorporating both PE and nano TiO₂. Synergistic effects of PE and nano TiO₂ significantly decreased the oxygen permeability of the sago starch films from 8.17 to 4.44 (cc.mil/m²·day). Application results of bionanocomposite films for chicken fillet storage at 4 °C for 12 days demonstrated that the films have great potential to increase the shelf life of fillets. The total volatile basic nitrogen (TVB-N) of chicken fillets increased from 7.34 to 35.28 after 12 days, whereas samples coated with bionanocomposite films increased from 7.34 to 16.4. For other physicochemical and microbiological properties of chicken fillets, similar improvement was observed during cold storage. It means that the bionanocomposite films could successfully improve the shelf life of the chicken fillets by at least eight days compared to the control sample. Full article

In this original research, biodegradable corn starch (CS) and wheat gluten (wg)-based silver nanofilms were synthesized and analyzed by using goji berry extract taurine (ta), garlic extract (GC), whey powder (wh), and montmorillonite clay nanoparticles. Antibacterial-corn-starch-based nano films were analyzed by using the methods of high-performance liquid chromatography (HPLC), Fourier Transform infrared spectroscopy (FTIR-ATR), X-ray diffraction (XRD), dynamic and mechanical (DMA) analysis, and scanning electron microscopy (SEM). In addition, the antibacterial resistances of the corn starch nano films against the bacteria Salmonella and Staphylococcus aureus (S. aureus) and Listeria monocytogenes were examined and the migration assays were carried out. The migration analysis results of CS₁, CS₂, and CS₃ nanocomposite films were found as 0.305, 0.297, and 0.297 mg/dm², respectively. The inhibition zone of CS₁, CS₂, and CS₃ nanocomposite films were found as 1547, 386, and 1884 mm² against Salmonella bacteria. The results show that silver nanofilms are suitable as packaging films for the production of packaging in milk and dairy products, liquid foods, and acidic foods. Full article

This study demonstrated the feasibility of comprehensive enzymatic conversion of starch for non-waste applications in food industry. Enzymatic conversion of starch gives rise to nano-sized particles that can be used for manufacturing biodegradable and edible packaging materials and glucose syrup for replacing sugar in confectionery formulations. The 96 h enzymatic hydrolysis yielded starch nanoparticles smaller than 100 nm. Films based on nano-sized starch particles have promising physicochemical properties for manufacturing biodegradable and edible packaging materials. Such properties as reduced moisture content, increased homogeneity, crystallinity, and high initial thermal stability improve the mechanical and performance characteristics of the final food packaging materials. During film formation from starch subjected to preliminary mechanical amorphization, the polymer chain is recrystallized. The C-type crystal structure of starch is converted to the B-type structure. The supernatant obtained by starch hydrolysis can be used for producing glucose syrup. The resulting glucose syrup can be used as a sugar substitute in production of confectionery products. No objective technological differences in properties of glucose syrup obtained by comprehensive conversion of starch and the commercially available glucose syrup derived from sucrose were revealed. Full article

Starch is affected by several limitations, e.g., retro-gradation, high viscosity even at low concentrations, handling issues, poor freeze–thaw stability, low process tolerance, and gel opacity. In this context, physical, chemical, and enzymatic methods have been investigated for addressing such limitations or adding new attributes. Thus, the creation of biomaterial-based nanoparticles has sparked curiosity. Because of that, single nucleotide polymorphisms are gaining a lot of interest in food packaging technology. This is due to their ability to increase the mechanical and water vapor resistance of the matrix, as well as hide its re-crystallization during storage in high-humidity atmospheres and enhance the mechanical properties of films when binding in paper machines and paper coating. In medicine, single nucleotide polymorphisms (SNPs) are suitable as carriers in the field of drug delivery for immobilized bioactive or therapeutic agents, as well as wastewater treatments as an alternative to expensive activated carbons. Starch nanoparticle preparations can be performed by hydrolysis via acid hydrolysis of the amorphous part of a starch molecule, the use of enzymes such as pullulanase or isoamylase, or a combination of two regeneration and mechanical treatments with the employment of extrusion, irradiation, ultrasound, or precipitation. The possibility of obtaining cheap and easy-to-use methods for starch and starch derivative nanoparticles is of fundamental importance. Nano-precipitation and ultra-sonication are rather simple and reliable methods for nanoparticle production. The process involves the addition of a diluted starch solution into a non-solvent, and ultra-sonication aims to reduce the size by breaking the covalent bonds in polymeric material due to intense shear forces or mechanical effects associated with the collapsing of micro-bubbles by sound waves. The current study focuses on starch nanoparticle manufacturing, characterization, and emerging applications. Full article

Given recent worldwide environmental concerns, biodegradability, antibacterial activity, and healing properties around the wound area are vital features that should be taken into consideration while preparing biomedical materials such as wound dressings. Some of the available wound dressings present some major disadvantages. For example, low water vapor transmission rate (WVTR), inadequate exudates absorption, and the complex and high environmental cost of the disposal/recycling processes represent such drawbacks. In this paper, starch/polyvinyl alcohol (PVA) material with inserted nano-sized zinc-oxide particles (nZnO) (average size ≤ 100 nm) was made and altered using citric acid (CA). Both ensure an efficient antibacterial environment for wound-dressing materials. The film properties were assessed by UV–Vis spectrometry and were validated against the UV light transmission percentage of the starch/ polyvinyl alcohol (PVA)/ zinc-oxide nanoparticles (nZnO) composites. Analyses were conducted using X-ray Spectroscopy (EDX) and scanning electron microscopy (SEM) to investigate the structure and surface morphology of the materials. Moreover, to validate an ideal moisture content around the wound area, which is necessary for an optimum wound-healing process, the water vapor transmission rate of the film was measured. The new starch-based materials exhibited suitable physical and chemical properties, including solubility, gel fraction, fluid absorption, biodegradability, surface morphology (scanning electron microscopy imaging), and mechanical properties. Additionally, the pH level of the starch-based/nZnO film was measured to study the prospect of bacterial growth on this wound-dressing material. Furthermore, the in vitro antibacterial activity demonstrated that the dressings material effectively inhibited the growth and penetration of bacteria (Escherichia coli, Staphylococcus aureus). Full article