Search Results (6)

Background/Objectives: This research presents a novel analytical method for breast tumor characterization and tissue classification by leveraging intravoxel incoherent motion diffusion-weighted imaging (IVIM-DWI) combined with hyperspectral imaging techniques and deep learning. Traditionally, dynamic contrast-enhanced MRI (DCE-MRI) is employed for breast tumor diagnosis, but it involves gadolinium-based contrast agents, which carry potential health risks. IVIM imaging extends conventional diffusion-weighted imaging (DWI) by explicitly separating the signal decay into components representing true molecular diffusion ($D$) and microcirculation of capillary blood (pseudo-diffusion or $D*$). This separation allows for a more comprehensive, non-invasive assessment of tissue characteristics without the need for contrast agents, thereby offering a safer alternative for breast cancer diagnosis. The primary purpose of this study was to evaluate different methods for breast tumor characterization using IVIM-DWI data treated as hyperspectral image stacks. Dice similarity coefficients and Jaccard indices were specifically used to evaluate the spatial segmentation accuracy of tumor boundaries, confirmed by experienced physicians on dynamic contrast-enhanced MRI (DCE-MRI), emphasizing detailed tumor characterization rather than binary diagnosis of cancer. Methods: The data source for this study consisted of breast MRI scans obtained from 22 patients diagnosed with mass-type breast cancer, resulting in 22 distinct mass tumor cases analyzed. MR images were acquired using a 3T MRI system (Discovery MR750 3.0 Tesla, GE Healthcare, Chicago, IL, USA) with axial IVIM sequences and a bipolar pulsed gradient spin echo sequence. Multiple b-values ranging from 0 to 2500 s/mm² were utilized, specifically thirteen original b-values (0, 15, 30, 45, 60, 100, 200, 400, 600, 1000, 1500, 2000, and 2500 s/mm²), with the last four b-value images replicated once for a total of 17 bands used in the analysis. The methodology involved several steps: acquisition of multi-b-value IVIM-DWI images, image pre-processing, including correction for motion and intensity inhomogeneity, treating the multi-b-value data as hyperspectral image stacks, applying hyperspectral techniques like band expansion, and evaluating three tumor detection methods: kernel-based constrained energy minimization (KCEM), iterative KCEM (I-KCEM), and deep neural networks (DNNs). The comparisons were assessed by evaluating the similarity of the detection results from each method to ground truth tumor areas, which were manually drawn on DCE-MRI images and confirmed by experienced physicians. Similarity was quantitatively measured using the Dice similarity coefficient and the Jaccard index. Additionally, the performance of the detectors was evaluated using 3D-ROC analysis and its derived criteria (AUC_OD, AUC_TD, AUC_BS, AUC_TD−BS, AUC_ODP, AUC_SNPR). Results: The findings objectively demonstrated that the DNN method achieved superior performance in breast tumor detection compared to KCEM and I-KCEM. Specifically, the DNN yielded a Dice similarity coefficient of 86.56% and a Jaccard index of 76.30%, whereas KCEM achieved 78.49% (Dice) and 64.60% (Jaccard), and I-KCEM achieved 78.55% (Dice) and 61.37% (Jaccard). Evaluation using 3D-ROC analysis also indicated that the DNN was the best detector based on metrics like target detection rate and overall effectiveness. The DNN model further exhibited the capability to identify tumor heterogeneity, differentiating high- and low-cellularity regions. Quantitative parameters, including apparent diffusion coefficient ($ADC$), pure diffusion coefficient ($D$), pseudo-diffusion coefficient ($D*$), and perfusion fraction ($PF$), were calculated and analyzed, providing insights into the diffusion characteristics of different breast tissues. Analysis of signal intensity decay curves generated from these parameters further illustrated distinct diffusion patterns and confirmed that high cellularity tumor regions showed greater water molecule confinement compared to low cellularity regions. Conclusions: This study highlights the potential of combining IVIM-DWI, hyperspectral imaging techniques, and deep learning as a robust, safe, and effective non-invasive diagnostic tool for breast cancer, offering a valuable alternative to contrast-enhanced methods by providing detailed information about tissue microstructure and heterogeneity without the need for contrast agents. Full article

Under the dual impetus of environmental regulations and reliability requirements, the Pb–free/Pb hybrid assembly process in aerospace-grade ball grid array (BGA) components has become an unavoidable industrial imperative. However, constrained process compatibility during single or multiple reflow protocols amplifies structural heterogeneity in solder joints and accelerates dynamic microstructural evolution, thereby elevating interfacial reliability risks at solder joint interfaces. This paper systematically investigated phase composition, grain dimensions, thickness evolution, and crystallographic orientation patterns of interfacial intermetallic compounds (IMCs) in hybrid micro-solder joints under multiple reflows, employing electron backscatter diffraction (EBSD), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDX). The result shows that the first reflow induces prismatic Cu₆Sn₅ grain formation driven by Pb aggregation zones and elevated Cu concentration gradients. Surface-protruding fine grains significantly increase kernel average misorientation (KAMave) of 0.68° while minimizing crystallographic orientation preference density (PF_max) of 15.5. Higher aspect ratios correlate with elongated grain morphology, consequently elevating grain size of 5.3 μm and IMC thickness of 5.0 μm. Subsequent reflows fundamentally alter material dynamics: Pb redistribution transitions from clustered to randomized spatial configurations, while grains develop pronounced in-plane orientation preferences that reciprocally influence Sn crystal alignment. The second reflow produces scallop-type grains with minimized dimensions of 4.0 μm and a thickness of 2.1 μm, with a KAMave of 0.37° and PF_max of 20.5. The third reflow initiates uniform growth of scalloped grains of 7.0 μm with a stable population density, whereas the fifth reflow triggers a semicircular grain transformation of 9.1 μm through conspicuous coalescence mechanisms. This work elucidates multiple reflow IMC growth mechanisms in Pb–free/Pb hybrid solder joints, providing critical theoretical and practical insights for optimizing hybrid technologies and reliability management strategies in high-reliability aerospace electronics. Full article

Human activity recognition is known as the backbone of the development of interactive systems, such as computer games. This process is usually performed by either vision-based or depth sensors. So far, various solutions have been developed for this purpose; however, all the challenges of this process have not been completely resolved. In this paper, a solution based on pattern recognition has been developed for labeling and scoring physical exercises performed in front of the Kinect sensor. Extracting the features from human skeletal joints and then generating relative descriptors among them is the first step of our method. This has led to quantification of the meaningful relationships between different parts of the skeletal joints during exercise performance. In this method, the discriminating descriptors of each exercise motion are used to identify the adaptive kernels of the Constrained Energy Minimization method as a target detector operator. The results indicated an accuracy of 95.9% in the labeling process of physical exercise motions. Scoring the exercise motions was the second step after the labeling process, in which a geometric method was used to interpolate numerical quantities extracted from descriptor vectors to transform into semantic scores. The results demonstrated the scoring process coincided with the scores derived by the sports coach by a 99.5 grade in the R² index. Full article

A grid blackout is an intractable problem with serious economic consequences in many developing countries. Although it has been proven that microgrids (MGs) are capable of solving this problem, the uncertainties regarding when and for how long blackouts occur lead to extreme difficulties in the design and operation of the related MGs. This paper addresses the optimal design problem of the MGs considering the uncertainties of the blackout starting time and duration utilizing the kernel density estimator method. Additionally, uncertainties in solar irradiance and ambient temperature are also considered. For that, chance-constrained optimization is employed to design residential and industrial PV-based MGs. The proposed approach aims to minimize the expected value of the levelized cost of energy ($LCOE$), where the restriction of the annual total loss of power supply ($TLPS$) is addressed as a chance constraint. The results show that blackout uncertainties have a considerable effect on calculating the size of the MG’s components, especially the battery bank size. Additionally, it is proven that considering the uncertainties of the input parameters leads to an accurate estimation for the LCOE and increases the MG reliability level. Full article

Abundant spectral information endows unique advantages of hyperspectral remote sensing images in target location and recognition. Target detection techniques locate materials or objects of interest from hyperspectral images with given prior target spectra, and have been widely used in military, mineral exploration, ecological protection, etc. However, hyperspectral target detection is a challenging task due to high-dimension data, spectral changes, spectral mixing, and so on. To this end, many methods based on optimization and machine learning have been proposed in the past decades. In this paper, we review the representatives of hyperspectral image target detection methods and group them into seven categories: hypothesis testing-based methods, spectral angle-based methods, signal decomposition-based methods, constrained energy minimization (CEM)-based methods, kernel-based methods, sparse representation-based methods, and deep learning-based methods. We then comprehensively summarize their basic principles, classical algorithms, advantages, limitations, and connections. Meanwhile, we give critical comparisons of the methods on the summarized datasets and evaluation metrics. Furthermore, the future challenges and directions in the area are analyzed. Full article

Breast magnetic resonance imaging (MRI) is currently a widely used clinical examination tool. Recently, MR diffusion-related technologies, such as intravoxel incoherent motion diffusion weighted imaging (IVIM-DWI), have been extensively studied by breast cancer researchers and gradually adopted in clinical practice. In this study, we explored automatic tumor detection by IVIM-DWI. We considered the acquired IVIM-DWI data as a hyperspectral image cube and used a well-known hyperspectral subpixel target detection technique: constrained energy minimization (CEM). Two extended CEM methods—kernel CEM (K-CEM) and iterative CEM (I-CEM)—were employed to detect breast tumors. The K-means and fuzzy C-means clustering algorithms were also evaluated. The quantitative measurement results were compared to dynamic contrast-enhanced T1-MR imaging as ground truth. All four methods were successful in detecting tumors for all the patients studied. The clustering methods were found to be faster, but the CEM methods demonstrated better performance according to both the Dice and Jaccard metrics. These unsupervised tumor detection methods have the advantage of potentially eliminating operator variability. The quantitative results can be measured by using ADC, signal attenuation slope, D*, D, and PF parameters to classify tumors of mass, non-mass, cyst, and fibroadenoma types. Full article