Search Results (2,073)

This paper investigates how climate shelter initiatives implemented in European cities interact with National Adaptation Strategies (NAS) and National Adaptation Plans (NAP), assessing the degree of vertical integration between local practices and national climate adaptation frameworks. As urban heat increasingly threatens public health and exacerbates socio-spatial inequalities, climate shelters, conceived as networks of safe, accessible public spaces providing thermal comfort and social support, have emerged as innovative adaptation tools; however, their recognition within national policy architectures remains uneven across the EU. This study adopts a qualitative–comparative design structured in three phases: (i) a systematic review of NAS and NAP in the 27 EU Member States through keyword screening and classification of references as explicit, implicit, or absent; (ii) a mapping of climate shelter initiatives across 244 NUTS-2 capital cities; and (iii) an integrative cross-analysis of national frameworks and local implementation patterns. According to our results, only 4 Member States explicitly refer to climate shelters, 11 include implicit references, and 12 show no recognition, while 88 cities implement 97 initiatives, predominantly based on Nature-based Solutions and schoolyard transformations; 5 recurring governance configurations reveal bottom-up, top-down, and hybrid dynamics, demonstrating that local experimentation can anticipate, complement, and potentially reshape national adaptation policies. Full article

This study establishes experimentally grounded circumferential thermal criteria for heat-shrinkable crosslinked polyethylene (PEX) joint casings by coupling DSC-defined thermal activation with through-thickness thermal lag measured under trench-constrained irradiation. The activation temperature was identified as 140 °C from DSC, while an upper bound of the allowable outer-surface temperature was set to avoid thermal damage during installation. Full-scale temperature mapping revealed persistent circumferential non-uniformity caused by geometric line-of-sight limitations and inter-module gap regions, where the outer-surface temperature remained approximately 10–15 °C lower than directly irradiated locations, and the inner surface exhibited a delayed response due to the low thermal conductivity of PEX. Based on these observations, a two-stage heating sequence—an initial high-power stage followed by a reduced-power soaking stage—was experimentally derived to satisfy dual constraints: achieving inner-surface activation (≥140 °C) while maintaining the outer surface below the conservative outer-surface upper bound (~280 °C) and reducing circumferential temperature differences without surface overheating. Comparative joint tests confirmed that the proposed thermal criteria and sequence promote stable interfacial bonding and cohesive failure in the mastic layer, yielding higher repeatability and smaller strength scatter than conventional manual torch heating. The proposed framework provides experimentally grounded thermal criteria and a transferable procedure for designing heating conditions for heat-shrinkable polymer casing systems under constrained field environments. Full article

Ulaanbaatar, the capital of Mongolia, operates one of the world’s largest district heating (DH) systems in the coldest national capital (heating degree-days ~5800). Despite serving over 60% of the city’s 1.6 million residents, the current 3rd generation DH system suffers from high thermal losses (~17–18%) and relies on coal-fired combined heat and power plants. Transitioning to 4th generation district heating (4GDH) with lower supply temperatures could reduce these losses while enabling future low-temperature renewable energy integration. A geographic information system (GIS)-based spatial heat load density (HLD) analysis uses operational data from the Ulaanbaatar District Heating Company, encompassing 13,500 buildings with a total connected capacity of 3924 MW. Grid-based spatial analysis was performed at two resolutions (1 km² and 2 km²). Threshold sensitivity analysis was conducted across HLD criteria of 1–5 MW/km². Results indicate that median HLD values exceed the European reference threshold of 3 MW/km², with log-normal distributions confirmed by Shapiro–Wilk tests. Three candidate pilot zones were identified. A hybrid temperature strategy (65/35 °C above −25 °C; 90/60 °C below) further contextualizes the findings. These results suggest spatially favorable conditions for 4GDH development, providing a quantitative foundation for subsequent techno-economic feasibility studies. Full article

Background/Objectives: Hemodynamic monitoring is essential for guiding appropriate treatment by assessing cardiac output and volume status, as well as for preventing complications associated with excessive fluid administration. The EdgeFlow CW10 Plus is a device that extends conventional hemodynamic monitoring by incorporating pulmonary abnormality surveillance through B-line detection. This study aimed to evaluate whether the hemodynamic monitoring and pulmonary monitoring functions are well integrated, and verify the usability and efficiency of the system. Methods: A usability test was conducted with a panel of 15 medical professionals from diverse specialties and varying levels of clinical experience. Data from satisfaction surveys, heat maps, the System Usability Scale (SUS), and the NASA-TLX were analyzed to determine whether usability differences existed based on the duration of clinical experience. Results: The device demonstrated a high overall task success rate, averaging 93.2%. Regarding eye-tracking analysis based on clinical experience, it was observed that participants with more years of experience either failed to direct their gaze toward task-relevant user interface (UI) elements as effectively as those with fewer years of experience or showed similar patterns. Conclusions: The usability evaluation confirmed that the hemodynamic and pulmonary monitoring functions of the EdgeFlow CW 10 PLUS are well integrated, with the device demonstrating high usability and satisfaction. This integration is expected to support medical professionals in monitoring cardiac output and fluid status, facilitating timely therapeutic interventions while preventing complications related to fluid overload. Full article

Effective water resource management requires understanding the causal mechanisms driving water quality dynamics, yet extracting actionable insights from complex multivariate monitoring data remains a persistent challenge. This study presents CEcBaN (CCM-ECCM-Bayesian Networks), a decision-support tool that integrates Convergent Cross Mapping (CCM) for detecting dynamical coupling, Extended CCM (ECCM) for identifying temporal lags and causal directionality, and Bayesian network (BN) modeling for probabilistic scenario-based inference. The tool was designed to enable managers and researchers without programming expertise to reconstruct causal networks from routine monitoring data, distinguish direct from indirect effects, and evaluate intervention scenarios. CEcBaN was validated using four synthetic datasets with known causal structures, achieving superior specificity (0.83) and edge count accuracy (25% error) compared to Transfer Entropy (0.47 specificity, 139% error), Granger causality (0.82, 39% error), and the PC algorithm (0.83, 46% error). Application to Lake Kinneret, Israel, demonstrated the tool’s utility across three water quality challenges: (1) nitrogen cycling, where the nitrification pathway was reconstructed and seasonal stratification was identified as a key modulator (accuracy 0.931); (2) thermal dynamics, where a transition from atmosphere-driven to internally regulated heat transfer during stratification was revealed (2.1-fold increase in coupling strength); and (3) cyanobacterial bloom prediction, where prior phytoplankton community composition provided a 4–6-week early warning window (accuracy 0.846). CEcBaN advances causal inference in water resource management by making these analytical methods accessible through an intuitive interface. Full article

Load forecasting for Integrated Energy Systems (IESs) is critical to enabling multi-energy coordinated optimization and low-carbon scheduling. Facing multi-load types and multi-site high-dimensional heterogeneous data, there remains a global learning challenge stemming from insufficient representation of spatiotemporal coupling features. In response to the multi-source heterogeneous characteristics of IES loads, this paper designs a Spatiotemporal Topology Encoder that maps load data into a tensorized multi-energy spatiotemporal topological representation via fuzzy classification and multi-scale ranking. In parallel, we construct a MultiScale Hybrid Convolver to extract multi-scale, multi-level global spatiotemporal features of multi-energy load representations. We further develop a Temporal Segmentation Transformer and a Steady-State Exponentially Gated Memory Unit, and design a jointly optimized forecasting model that enforces global dynamic correlations and local, steady-state preservation. Altogether, we propose a multi-scale spatiotemporal fusion and steady-state memory-driven load forecasting method for integrated energy systems (MSTF-SMDN). Extensive experiments on a public real-world dataset from Arizona State University demonstrate the superiority of the proposed approach: compared to the strongest baseline, MSTF-SMDN reduces cooling load RMSE by 16.09%, heating load RMSE by 12.97%, and electric load RMSE by 6.14%, while achieving R² values of 0.99435, 0.98701, and 0.96722, respectively, confirming its feasibility, efficiency, and promising potential for multi-energy load forecasting in IES. Full article

Accurate mapping of near-surface air temperature ($T_{\mathrm{air}}$) at the fine spatial resolution is required for city-scale monitoring and remains a critical challenge in Earth Observation (EO). Reliance on ground-based measurements is constrained by their sparse spatial coverage and high operational costs. We present a novel, scalable machine learning framework designed to overcome this limitation. Our method utilizes interpretable Convolutional Neural Networks (CNNs) to fuse high-resolution Landsat data, integrating both thermal and reflective spectral bands, with contextual spatiotemporal metadata. This approach allows for inference, at 30 m resolution, of $T_{\mathrm{air}}$ fields without relying on dense, localized ground monitoring networks. Our hybrid CNN architecture is optimized for spatial generalization, maintaining strong and transferable performance (station-wise $R^2\approx 0.88$) across diverse environments from humid coasts ($R^2\approx 0.89$) to arid interiors ($R^2\approx 0.84$). Although focused on a specific geographical region, our results suggest a robust and reproducible pathway for generating spatially consistent temperature fields from globally available EO archives, directly supporting urban heat island mitigation, climate policy development, and high-resolution public health assessment worldwide. Full article

Localization and navigation techniques have become fundamental for modern lives, while achieving accurate results indoors still remains a significant challenge. The widespread adoption of smart devices, and especially smartphones, has increased the need for accurate and robust pedestrian dead reckoning systems that operate in infrastructure-less environments. Pedestrian dead reckoning’s primary challenge is maintaining accuracy despite varying smartphone placements (attitudes) and the noisy, low-cost inertial measurements units. In this work, a comprehensive pedestrian dead reckoning framework is presented that integrates advanced step counting and heading estimation techniques. For step detection and counting, we propose a robust step counting algorithm that utilizes the optimum fusion of the raw IMU readings, i.e., accelerometer, linear accelerometer, gyroscope, and magnetometer readings, each broken down into three degrees of freedom for different body placements and walking speeds. Furthermore, to address the critical issue of heading estimation, we propose the heading estimation axis mapping (HEAT-MAP) algorithm, which dynamically adjusts the sensor axes in response to the smartphone’s orientation, ensuring a consistent coordinate frame and reducing heading drift. Moreover, to eliminate cumulative pedestrian dead reckoning errors, the system incorporates an adaptive weighted fusion mechanism with Wi-Fi fingerprinting. Experimental results demonstrate that this integrated system significantly improves the overall trajectory accuracy, providing a high-precision, attitude-unconstrained solution for real-time indoor pedestrian navigation. Full article

Root plasticity is vital for crop survival amid global warming. Yet, the molecular mechanisms governing wheat root thermotolerance remain largely unknown. In this study, we combined phenomics, transcriptomics, and metabolomics with machine learning to analyze the performance of heat-tolerant cultivar YM158 and heat-sensitive cultivar YM15 under varying heat stress. While high temperatures (35 °C) severely inhibited root growth and caused oxidative damage in YM15, YM158 maintained robust root architecture and redox balance. Using weighted gene co-expression network analysis (WGCNA) alongside the random forest feature selection algorithm, we identified the flavonoid biosynthesis pathway as central to thermotolerance. Protein–protein interaction network analysis revealed that wheat root adaptability to high temperatures involves maintaining protein homeostasis via the endoplasmic reticulum protein processing system, specifically activating the flavonoid biosynthesis pathway and enhancing the antioxidant enzyme system. Furthermore, we identified a potential regulatory hub involving the cell wall sensor FERONIA (FER) and heat shock factors (HSFs), highlighting a complex interaction between hormonal signaling and secondary metabolism. Our study offers a detailed map of root heat adaptation and positions the flavonoid-mediated antioxidant system as a promising target for breeding climate-resilient crops. Full article

Cataract diagnosis requires a comprehensive dilated examination by an ophthalmologist using a slit lamp; there is currently no effective means to objectively screen for cataracts in the community using portable devices without dilation. We hypothesized that it would be possible to predict cataract severity using deep learning on images taken using a portable smartphone-based slit lamp prototype, with and without dilation. In this prospective cross-sectional pilot study, slit lamp images were captured from eligible patients with cataracts in a tertiary clinic using a portable slit lamp prototype attached to a smartphone. The Pentacam nuclear staging score (PNS, Pentacam^®, Oculus, Inc., Arlington, WA, USA) was taken from the dilated pupils and served as ground truth. A transformer prototypical network with the Swin transformer on the images was trained to assign the class label corresponding to the highest predicted probability. Heat maps were generated based on attribution masks to identify the anatomical areas of concern. A total of 1900 images from 198 eyes of 99 patients were captured. The average age was 65.3 ± 10.4 years (range, 41.0 to 88.0 years) and the average PNS score was 1.57 ± 0.81 (range, 0 to 4). The model achieved an average accuracy of 81.25% and 74.38% for undilated and dilated eyes, respectively. Heat map visualization using the integrated gradient method successfully identified the anatomical area of interest in certain images. This study suggests the possibility of estimating cataract density using a portable smartphone slit lamp device without dilation. Further work is under way to validate this technique in a larger and more diverse group of eyes with cataracts. Full article

Precise drug delivery remains a critical challenge in nanomedicine, with conventional nanocarriers suffering from significant drug leakage during circulation, limited control over release kinetics, and a lack of temporal control. This study presents a computational design and multiphysics simulation of a Smart Biodegradable Nanosystem. Through COMSOL Multiphysics simulations encompassing heat transfer, mass diffusion, and fluid dynamics, we validated the theoretical feasibility of a seven-layer architecture. The computational model predicts that mapping a re-entrant auxetic metamaterial topology onto a spherical scaffold enables geometric locking under fluidic stress, theoretically minimizing drug leakage. Furthermore, modeled thermosensitive dynamic covalent bonds demonstrate highly controlled release kinetics. All performance metrics presented herein are derived from predictive mathematical modeling. Theoretical degradation profiles indicate complete breakdown within 90–180 days into endogenous substances. This simulation-based study establishes a rigorous theoretical blueprint to guide future empirical fabrication in precision nanomedicine. Full article

Climate change is a critical global challenge, and the building sector accounts for nearly 30% of global greenhouse gas (GHG) emissions, remaining a key target for mitigation. Indoor environments contribute significantly to GHG emissions, primarily through heating, cooling, lighting, and occupant-driven energy use. Indoor mapping, serving as the foundation for Digital Twins (DTs), provides a spatiotemporal framework that integrates sensor data with Building Information Modelling (BIM), Geographic Information Systems (GIS), and Internet of Things (IoT) to support energy-efficient, low-carbon building operations. This review examined the role of indoor mapping in understanding, modelling, and reducing GHG emissions in buildings. It synthesized current advancements in indoor spatial data acquisition, ranging from Light Detection And Ranging (LiDAR) and Simultaneous Localization and Mapping (SLAM) to deep learning-based floor plan extraction, and evaluated their contribution to improved indoor environmental analysis. The review highlighted emerging techniques, challenges, and gaps, particularly the limited integration of physical indoor spaces with virtual layers representing assets, occupants, and equipment. Addressing this gap requires embedding spatial modelling as an intermediate analytical layer that structures and contextualizes sensor data to support spatiotemporal decision-making. Overall, this review demonstrated that indoor mapping plays a critical role in transforming spatial information into actionable insights, enabling more accurate energy modelling, enhanced real-time building management, and stronger data-driven strategies for GHG mitigation in the built environment. Full article

The rapid adoption of artificial intelligence (AI) across public services and critical infrastructure is reshaping digital governance. While AI promises efficiency and innovation, its reliance on large, high-dimensional datasets introduces privacy, bias, transparency and accountability risks that existing frameworks struggle to address. This study evaluates the maturity of current AI governance frameworks and develops an integrated risk-tiering model that connects ethical principles to auditable technical controls, aligning with Sustainable Development Goal 9 on industry, innovation and infrastructure. A systematic literature review of 450 records from major databases was conducted using PRISMA 2020 guidelines; 95 high-quality studies were analyzed using principal component analysis and k-means clustering. The analysis produced a heat map of governance frameworks, a co-occurrence network of themes, a cluster analysis of framework coverage and an integrated governance risk framework supported by a risk-tiering matrix. Findings reveal a fragmented landscape dominated by ethics/privacy-centric and compliance/risk-focused approaches, with few integrated frameworks and evident tension between privacy and security. This synthesis bridges the gap between values and practice, offering a policy-ready model for secure and sustainable AI governance. Full article

Smart energy networks, including electricity distribution and district heating, are increasingly operated as sensor-enabled infrastructures where maintenance decisions must be made under heterogeneous and time-varying operating conditions. In these settings, time-to-event data are rarely complete; preventive actions and limited observation horizons routinely introduce censoring and truncation, so models and validation procedures must account for partially observed lifetimes to avoid biased inference and misleading performance estimates. This review surveys survival models for predictive maintenance (PdM) and remaining useful life (RUL) estimation, spanning non-parametric, semi-parametric, parametric, and learning-based approaches, with emphasis on censoring-aware formulations and the use of static and time-varying covariates derived from sensor, inspection, and contextual information. A structured taxonomy and a systematic mapping of model families to data types, core assumptions (proportional hazards versus parametric distributional structure), and decision-oriented outputs such as risk ranking, horizon failure probabilities, and RUL distributions are presented. Evaluation practice is also synthesized by covering discrimination metrics, censoring-aware RUL accuracy measures, and probabilistic assessment via proper scoring rules, including the time-dependent Brier score and Integrated Brier Score (IBS). The review provides researchers and practitioners with a practical guide to selecting, fitting, and evaluating survival models for risk-informed maintenance planning in smart energy networks. Full article

Rapid urbanization, environmental degradation and climate variability are intensifying the exposure of urban populations to multiple, interacting hazards in megacities. In India’s capital, Delhi, extreme heat, worsening air quality and flood-related stress overlap in impacted areas, exacerbated by high population density in low-lying zones and extensive built-up cover. This study develops an integrated spatial framework for assessing relative multi-hazard risk potential in Delhi by combining remote sensing, climate reanalysis, land use and demographic datasets into a predictive modeling system to support urban resilience planning. A comprehensive suite of twenty-two predictors representing thermal stress, air quality, surface indices, topography, hydrology, land use land cover (LULC), and demographic data was derived from diverse Earth observation sources. A cloud-native workflow leveraging Google Earth Engine (GEE) and Python 3 harmonized these predictors to train a Light Gradient Boosting Machine (LightGBM) model with five-fold spatial cross-validation. Quantile regression was used to estimate lower (P10) and upper (P90) predictive bounds, which are interpreted here as empirical predictive intervals around the modeled risk surface rather than as a strict separation of different uncertainty types, while SHapley Additive exPlanations (SHAP) decomposed the non-linear contributions of individual features. The model achieved predictive accuracy (R² = 0.98, MAE = 0.01), with residuals centered near zero and consistent performance across spatial folds, demonstrating strong generalizability. Road density (63.4%) and population density (25.9%) emerged as the primary predictors of the modeled risk surface, followed by building density and NO₂ concentration. Conversely, vegetation cover (NDVI) functioned as a critical mitigating buffer. Spatial risk maps identified persistent high-risk clusters in eastern and northeastern Delhi, coinciding with dense transport networks and industrial zones. The integrated P90 mapping framework provides spatially explicit and uncertainty-aware information on relative multi-hazard risk potential to guide targeted interventions, such as transport corridor mitigation and urban greening in Delhi and other rapidly urbanizing cities. Full article