Search Results (4)

This paper introduces a multi-objective optimization problem (MPO) for the forming process parameters of disc forgings using grey relational analysis (GRA) and the response surface methodology (RSM). Firstly, an experimental design based on the Box–Behnken design (BBD) principle was established, and simulations were performed in Deform to obtain response data. Secondly, GRA was used to transform the MPO into a grey relational degree (GRD) problem, and the entropic weight method was integrated to ascertain the influence weights of each variable on GRD. Then, a quadratic polynomial prediction model based on the RSM was constructed, and its accuracy was ensured through model validation. Finally, the optimal process parameter combination was determined through the particle swarm optimization algorithm, which included a friction coefficient of 0.3, an initial temperature of 1250 °C, and a downward pressing speed of 7.5 mm/s. The results of the experimental investigation indicate that optimized process parameters significantly reduce the forming load, equivalent stress, and damage value, effectively enhancing the overall quality of forged parts. Full article

Yield and rice quality indicators of crops are a direct reflection of the rational irrigation and fertilizer strategy. However, the effects of controlled irrigation (CI) combined with the split application of fertilization managements (straw returning, organic fertilizer, and conventional fertilizer) on rice quality are not clear in southeast China. This study aims at exploring the effects of three fertilization managements applied under CI or flooding irrigation on rice yield, quality, enzyme activity, and soluble sugar content including 43 indicators, to determine the optimal comprehensive evaluation model, management, and representative indexes. The results showed that compared with CF (CI + conventional fertilizer), CS (CI + straw returning) significantly increased yield (27.65%), irrigation water use efficiency (6.20%), chalky grain rate (9.67%), chalkiness (1.83%), protein content (4.29%), and amylose content (0.33%), indicating that CS improved yield and milling quality but decreased cooking and appearance quality. This was mainly because CS promoted the activities of alpha-amylase, ADPG (ADP-glucose pyrophosphorylase), and GBSS (granule-bound starch synthase) and reduced the soluble sugar content in rice. Grey relational degree analysis (GRD), the entropy method (ETM), and TOPSIS (the technique for order preference by similarity to an ideal solution) were used to comprehensively evaluate the rice quality and determined that CS treatments could synergistically improve yield and rice quality. The five indexes (adhesive strength, HPV, ADPG, soluble sugar (leaf), yield) and TOPSIS model can be used as the best indexes and model to evaluate the rice quality. These results could provide scientific management and evaluate practices for high-yield and high-quality rice cultivation, which may be promising for a cleaner production strategy. Full article

The fingerprint method has been widely adopted in Wi-Fi indoor positioning because of its advantage in non-line-of-sight channels between access points (APs) and mobile users. However, the received signal strength (RSS) during the fingerprint positioning process generally varies due to the dissimilar hardware configurations of heterogeneous smartphones. This difference may degrade the accuracy of fingerprint matching between fingerprint and test data. Thus, this paper puts forward a fingerprint method based on grey relational analysis (GRA) to approach the challenge of heterogeneous smartphones and to improve positioning accuracy. Initially, the grey relational coefficient (GRC) between the RSS comparability sequence of each reference point (RP) and the RSS reference sequence of the test point (TP) is calculated. Subsequently, the grey relational degree (GRD) between each RP and TP is determined on the basis of GRC, and the K most relational RPs are selected in accordance with the value of GRD. Finally, the user location is determined by weighting the K most relational RPs that correspond to the coordinates. The main advantage of this GRA method is that it does not require device calibration when handling heterogeneous smartphone problems. We further carry out extensive experiments using heterogeneous Android smartphones in an office environment to verify the positioning performance of the proposed method. Experimental results indicate that the proposed method outperforms the existing ones no matter whether heterogeneous smartphones are used. Full article

The power industry is the main battlefield of CO₂ emission reduction, which plays an important role in the implementation and development of the low carbon economy. The forecasting of electricity demand can provide a scientific basis for the country to formulate a power industry development strategy and further promote the sustained, healthy and rapid development of the national economy. Under the goal of low-carbon economy, medium and long term electricity demand forecasting will have very important practical significance. In this paper, a new hybrid electricity demand model framework is characterized as follows: firstly, integration of grey relation degree (GRD) with induced ordered weighted harmonic averaging operator (IOWHA) to propose a new weight determination method of hybrid forecasting model on basis of forecasting accuracy as induced variables is presented; secondly, utilization of the proposed weight determination method to construct the optimal hybrid forecasting model based on extreme learning machine (ELM) forecasting model and multiple regression (MR) model; thirdly, three scenarios in line with the level of realization of various carbon emission targets and dynamic simulation of effect of low-carbon economy on future electricity demand are discussed. The resulting findings show that, the proposed model outperformed and concentrated some monomial forecasting models, especially in boosting the overall instability dramatically. In addition, the development of a low-carbon economy will increase the demand for electricity, and have an impact on the adjustment of the electricity demand structure. Full article