Search Results (7)

With advances in underwater exploration and intelligent ocean technologies, wheeled underwater mobile robots are increasingly used for seabed surveying, engineering, and environmental monitoring. However, complex terrains centered on seabed soft slopes—characterized by wheel slippage due to soil deformability and force imbalance arising from slope variations—pose challenges to the accuracy and robustness of trajectory tracking control systems. Model predictive control (MPC), known for predictive optimization and constraint handling, is commonly used in such tasks. Yet, its performance relies on manually tuned parameters and lacks adaptability to dynamic changes. This study introduces a hybrid grey wolf-particle swarm optimization (GPSO) algorithm, combining the exploratory ability of a grey wolf optimizer with the rapid convergence of particle swarm optimization. The GPSO algorithm adaptively tunes MPC parameters online to improve control. A kinematic model of a four-wheeled differential-drive robot is developed, and an MPC controller using error-state linearization is implemented. GPSO integrates hierarchical leadership and chaotic disturbance strategies to enhance global search and local convergence. Simulation experiments on circular and double-lane-change trajectories show that GPSO-MPC outperforms standard MPC and PSO-MPC in tracking accuracy, heading stability, and control smoothness. The results confirm the improved adaptability and robustness of the proposed method, supporting its effectiveness in dynamic underwater environments. Full article

In modern vehicles, Autonomous Driving Systems (ADSs) are designed to operate partially or fully without human intervention. The ADS pipeline comprises multiple layers, including sensors, perception, localization, mapping, path planning, and control. The Robot Operating System (ROS) is a widely adopted framework that supports the modular development and integration of these layers. Among them, the path-planning and control layers remain particularly challenging due to several limitations. Classical path planners often struggle with non-smooth trajectories and high computational demands. Meta-heuristic optimization algorithms have demonstrated strong theoretical potential in path planning; however, they are rarely implemented in real-time ROS-based systems due to integration challenges. Similarly, traditional PID controllers require manual tuning and are unable to adapt to system disturbances. This paper proposes a ROS-based ADS architecture composed of eight integrated nodes, designed to address these limitations. The path-planning node leverages a meta-heuristic optimization framework with a cost function that evaluates path feasibility using occupancy grids from the Hector SLAM and obstacle clusters detected through the DBSCAN algorithm. A dynamic goal-allocation strategy is introduced based on the LiDAR range and spatial boundaries to enhance planning flexibility. In the control layer, a modified Pure Pursuit algorithm is employed to translate target positions into velocity commands based on the drift angle. Additionally, an adaptive PID controller is tuned in real time using the Differential Evolution (DE) algorithm, ensuring robust speed regulation in the presence of external disturbances. The proposed system is practically validated on a four-wheel differential drive robot across six scenarios. Experimental results demonstrate that the proposed planner significantly outperforms state-of-the-art methods, ranking first in the Friedman test with a significance level less than 0.05, confirming the effectiveness of the proposed architecture. Full article

Precise modeling of differential drive robots is crucial for effective control and trajectory planning in autonomous systems. A comparative analysis of two modeling approaches for a four-wheel differential drive robot is presented in this paper. The first approach, named Motor-Based Model (MBM), identifies four transfer functions, one for each motor, while the second approach, named Simplified Model (SM), uses only two transfer functions, one for linear velocity and another for angular velocity. Both models were validated by comparing their predicted trajectories against real odometry data obtained from a SLAM system implemented on a differential-drive robot. This provided a practical assessment of each model’s accuracy and underscored the importance of model selection in control design and navigation tasks. The results showed that the Motor-Based Model (MBM) consistently outperformed the Simplified Model (SM) in terms of odometry accuracy, both in position and orientation. Across all trajectories, the average RMSE for position using MBM was 0.309 m, while the SM recorded a higher average RMSE of 0.414 m. Similarly, the maximum position error averaged 0.522 m for MBM and 0.710 m for SM, confirming that MBM is more accurate and consistent in position tracking. Regarding the results of orientation estimation, when averaged across all experiments, the MBM maintained a lower angular RMSE of 0.170 rad in contrast to SM, which achieves an RMSE of 0.239 rad. The maximum angular error was also higher for the MBM at 0.316 rad, compared to 0.447 rad for the SM. Moreover, the computational performance evaluation indicated that the SM consistently outperformed MBM, achieving a 30% reduction in simulation time and substantially lower memory usage. These results demonstrate the relationship between model complexity and accuracy and suggest that the motor-specific model is more appropriate for applications requiring precise mapping or localization, such as SLAM, while the simplified model may be suitable for simpler use cases with lower computational requirements, such as embedded systems with limited resources. This paper provides a practical evaluation of the accuracy and computational performance of two modeling approaches, highlighting the implications of model selection for the design of navigation tasks. Full article

The essence of biomimetics in human–computer interaction (HCI) is the inspiration derived from natural systems to drive innovations in modern-day technologies. With this in mind, this paper introduces a biomimetic adaptive pure pursuit (A-PP) algorithm tailored for the four-wheel differential drive robot (FWDDR). Drawing inspiration from the intricate natural motions subjected to constraints, the FWDDR’s kinematic model mirrors non-holonomic constraints found in biological entities. Recognizing the limitations of traditional pure pursuit (PP) algorithms, which often mimic a static behavioral approach, our proposed A-PP algorithm infuses adaptive techniques observed in nature. Integrated with a quadratic polynomial, this algorithm introduces adaptability in both lateral and longitudinal dimensions. Experimental validations demonstrate that our biomimetically inspired A-PP approach achieves superior path-following accuracy, mirroring the efficiency and fluidity seen in natural organisms. Full article

This article describes a method for the real-time monitoring of the current consumed by a Dynamixel MX 64 AT servomotor used in the actuation system of modular mobile robotic platforms having differential locomotion and conventional wheels. The data acquisition method is based on an Arduino Mega 2560 development board interfaced with Matlab Simulink and the ASC712-5A hall sensor for current detection. A Simulink model is presented that performs the detection of a sensor reference voltage, which needs to be calibrated for a correct reading of the current. Due to the low resolution of the analog-to-digital converter with which the Arduino Mega is equipped, current monitoring is difficult to achieve, having large fluctuations and a lower resolution than the current absorbed by the servomotor. The solution to this problem is achieved by implementing, in the hardware construction, an ADS115 conversion module with 16-bit resolution, which leads to an increase in the measurement range of the ASC712-5A sensor. The current acquisition model with the Hall sensor is experimentally validated using measurements on the physical model of the drive wheel. This article further deals with the CAD and digital block modeling of mobile platforms with four and two wheels. The dynamic model of the robot is created in the Simulink–Simscape–Multibody environment and is used to determine the servomotor torques when the robot is moving along the predefined path. The torque variations are entered as variables in the Simulink digital block model of the robot. The Simulink model is simulated when moving along a square path, which determines the variation in the current absorbed by the motors. Experimental validation of the model is carried out using measurements on the functional models that operate in real conditions. A power consumption method is further proposed. Full article

Tracked mobile robots can overcome the limitations of wheeled and legged robots in environments, such as construction and mining, but there are still significant challenges to be addressed in terms of trajectory tracking. This study proposes a kinematic strategy to improve the trajectory-tracking performance of a PASTRo (Passively Articulated Suspension based Track-typed mobile robot), which comprises four tracks, two rockers, a differential gear, and a main body. Due to the difficulties in explicitly identifying track-terrain contact angles, suspension kinematics is used to identify track-terrain contact angles (TTCA) in arbitrarily rough terrains. Thus, the TTCA-based driving velocity projection method is proposed in this study to improve the maneuverability of PASTRo in arbitrarily rough terrains. The RecurDyn-Simulink co-simulator is used to examine the improvement of PASTRo compared to a tracked mobile robot non-suspension version. The results indicate that PASTRo has a 33.3% lower RMS(Root Mean Square) distance error, 56.3% lower RMS directional error, and 43.2% lower RMS offset error than the four-track skid-steer mobile robot (SSMR), even with planar SSMR kinematics. To improve the maneuverability of PASTRo without any information on the rough terrain, the TTCA is calculated from the suspension kinematics, and the TTCA obtained is used for both TTCA-based driving velocity projection methods. The results show that PASTRo, with the TTCA-based driving velocity projection method, has a 39.2% lower RMS distance error, 57.9% lower RMS directional error, and 51.9% lower RMS offset error than the four-track SSMR. Full article

This article introduces a wall-climbing robot that uses the reverse thrust of the propeller as the adsorption force. The robot is symmetrically distributed in structure and the adsorption force is symmetrically distributed before and after so that it can adapt to the surface of a variety of different media materials and achieve stable adsorption and movement of a variety of wall surfaces. The robot mainly uses the reverse thrust of the aircraft propeller as the adsorption force to achieve wall adsorption. The robot relies on four wheels to move forward. The forward power mainly comes from the combined action of the propeller reverse thrust component and the front wheel driving force. During the movement of the robot, the steering is realized by the front wheel differential control. In this paper, we design the structure of a dual-propeller dynamic adsorption wall mobile robot, plan the movement process of the robot from the ground to the wall, analyze the stable adsorption conditions of the robot wall, and carry out the robot’s motion performance and adaptability test under different ground/wall environments to verify that the robot is stable and feasible. Full article