Search Results (5)

The terrain in hilly and mountainous areas is complex, and the level of agricultural mechanization is low. This article systematically reviews the research progress of key technologies for agricultural machinery power chassis in hilly and mountainous areas, and conducts an analysis of five aspects: the power system, walking system, steering system, leveling system, and automatic navigation and path tracking control system. In this manuscript, (1) in terms of the power system, the technical characteristics and application scenarios of mechanical, hydraulic, and electric drive systems were compared. (2) In terms of the walking system, the performance differences between wheeled, crawler, legged, and composite walking devices and the application of suspension systems in agricultural machinery chassis were discussed. (3) In terms of the steering system, the steering characteristics of wheeled chassis and crawler chassis were analyzed, respectively. (4) In terms of the leveling system, the research progress on hydraulic and electric leveling mechanisms, as well as intelligent leveling control algorithms, was summarized. (5) The technology of automatic navigation and path tracking for agricultural machinery chassis was discussed, focusing on multi-sensor fusion and advanced control algorithms. In the future, agricultural machinery chassis will develop towards the directions of intelligence, automation, greening, being lightweight, and being multi-functionality. Full article

Single-track electric agricultural chassis plays a vital role in autonomous navigation and driving operations in hilly and mountainous regions, where its path tracking performance directly affects the operational accuracy and stability. However, in complex farmland environments, traditional methods often suffer from frequent turning and large tracking errors due to variable path curvature, uneven terrain, and track slippage. To address these issues, this paper proposes a path tracking algorithm combining a segmented preview model with variable universe fuzzy control, enabling dynamic adjustment of the preview distance for better curvature adaptation. Additionally, a heading deviation prediction model based on Support Vector Regression (SVR) optimized by Particle Swarm Optimization (PSO) is introduced, and a steering angle compensation controller is designed to improve the turning accuracy. Simulation and field experiments show that, compared with fixed preview distance and fixed-universe fuzzy control methods, the proposed algorithm reduces the average number of turns per control cycle by 30.19% and 18.23% and decreases the average lateral error by 34.29% and 46.96%, respectively. These results confirm that the proposed method significantly enhances path tracking stability and accuracy in complex terrains, providing an effective solution for autonomous navigation of agricultural machinery. Full article

The application of robotics has great implications for future food security, sustainable agricultural development, improving resource efficiency, reducing chemical pesticide use, reducing manual labor, and maximizing field output. Aiming at the problems of high labor intensity and labor shortage in the fields of pesticide application, weeding, and field information collection, a multifunctional and electric field management robot platform is designed, which has four switching steering modes (Ackermann steering, four-wheel steering, crab steering, and zero-radius steering), and its wheel-track can be automatically adjusted. Commonly used spraying booms, weeders, crop information collectors, and other devices can be easily installed on the robot platform. A multi-sensor integrated navigation system including a satellite positioning system, an RGB camera, and a multi-line lidar is designed to realize the unmanned driving of the robot platform in a complex field environment. Field tests have shown that the robot can follow the set route, and tests under simulated conditions have indicated that it can also dynamically correct paths based on crop rows by using a visual system. Results from multiple trials showed that the trajectory tracking accuracy meets the requirements of various field management operations. Full article

Due to the harsh working environment of wheeled agricultural vehicles in the field, it is difficult to ensure that all wheels make contact with the ground at the same time, which is easy to unequally distribute the yaw moments of each independent wheel. The commonly used vehicle lateral control methods are mostly controlled by coordinating the individual torque between different wheels. Obviously, this control method is not suitable for agricultural four-wheeled vehicles. The goal of this study was to provide a wheel steering angle control method that uses electric push rods as actuators that can cope with this problem. The design of a four-wheel steering controller generally adopts the linear PID control method, but the research object of this paper is difficult to establish an accurate and linear mathematical model due to the complex working environment. Therefore, fuzzy adjustment is added on the basis of PID control, which can meet the requirements of model difficulty and control accuracy at the same time. In order to verify the feasibility and rationality of the designed wheel steering mechanism, the model dynamics simulation based on ADAMS software and the response analysis of the electric linear actuator thrust were completed. Based on the kinematics model of the controlled object, the rotation angle of the actuator motor is used as the control target, the lateral deviation e and deviation variation ec are taken as input variables and the parameters K_P, K_I and K_D are taken as output variables, thereby establishing a fuzzy PID controller. Then, this controller is constructed in the Matlab/ Simulink simulation environment to analyze the lateral deviation and response stability during the process of vehicle path tracking. From the verification results of the linear path walking test under the fuzzy PID control method, the maximum lateral deviation of vehicle chassis is 2.7 cm when the driving speed is set as 1 m/s, and the deviation adjustment stable time of the system is 0.15 s. It can be seen that the proposed steering control strategy has good response performance and effectively increases the steering stability. Full article

A flexible chassis (FC) is a type of electric vehicle driven by in-wheel motors that can be used in narrow conditions in agricultural facilities. The FC is composed primarily of four off-center steering mechanisms (OSMs) that can be controlled independently. Various FC operation modes can be achieved including cross motion (CM), in-place rotation (IR), diagonal motion (DM), and steering motion (SM). However, it is difficult to achieve satisfactory motion mode switching (MMS) results under traditional distribution control methodologies due to a lack of linkage relationships between the four OSMs. The goal of this study was to provide a coupling control method that can cope with this problem. First, dynamic MMS models were derived. Then, an MMS coupling error (CE) model was derived based on coupling control and Lyapunov stability theory. Second, a fuzzy proportional integral derivative (PID) controller with self-tuning parameters was designed to reduce the CE during MMS. A fuzzy PI controller was also employed to improve response times and decrease OSM tracking motion steady-state error. Finally, MATLAB/Simulink simulations were performed and experimentally validated on hard pavement. The results showed that the proposed methodology could effectively reduce CE and guarantee MMS control stability while substantially shortening response times. The proposed methodology is effective and feasible for FC MMS. Full article