Search Results (8)

Reducing hospital-acquired infections, especially those related to medical devices, is essential not only to improve patients’ well-being but also to reduce healthcare costs. Among various antibacterial approaches, creating bactericidal device surfaces has been advocated as it reduces the likelihood of antibiotic-resistant strains emerging when antibiotics are used. Functionalizing the device surface with cationic groups, such as quaternary ammonium terminal groups, has been considered an effective approach for killing microbes upon contact. Nonetheless, multiple steps, some of which may require harsh chemical reactions and toxic solvents, are generally required to attach the cationic quaternary ammonium functionalities to the surface. Inspired by the mussel’s capability to bind to various substrates, various novel biomimetic cationic catechol-terminated small molecules having the quaternary ammonium functionality with different alkyl chain lengths were synthesized for the first time. These compounds were used for surface modification of medical-grade titanium using simple immersion approaches: a single-layer procedure or a two-layer approach, in which the first layer was prepared by dopamine immersion, followed by a second immersion in the compound of interest. The surface characteristics and antimicrobial capability against the Gram-negative E. coli and Gram-positive S. aureus were assessed. The likely effects of the alkyl chain length and modification schemes on the surface properties and antibacterial activity are discussed and compared. The highest antimicrobial activity against E. coli was noted on the modified surfaces prepared by the two-layer approach with the cationic compound having the shortest alkyl chain, C1, at 2 mg/mL (DA_C1-2) and 8 mg/mL (DA_C1-8). The DA_C1-8 surface also exhibited the highest antimicrobial activity against S. aureus. These findings indicated that the antibacterial activity of titanium can be greatly improved by selecting the appropriate compound and a proper, facile immersion procedure. Full article

The study of natural materials inspires sustainable innovations, with biomimetics excelling in surface modification. Polydopamine (PDA) offers a promising approach for modifying cellulose nanocrystals (CNC), enhancing their compatibility with hydrophobic polymers by improving interfacial adhesion. In this work, the modification of CNC with PDA (CNC@PDA) significantly enhanced the compatibility between the nanocargoes and the cellulose acetate (CA) matrix. The CNC@PDA complex formation was suggested through a combination of FTIR analysis, particle size distribution measurements and ζ-potential analysis. However, the exact mechanism behind dopamine polymerization on the surface of CNC remains a subject of ongoing debate among researchers due to its complexity. This study hypothesized the formation of modified CNC through this process. Furthermore, this study provided a satisfactory investigation of the antimicrobial activity of CNC@PDA in response to bacterial strains (E. coli, P. aeruginosa, S. aureus and L. plantarum) in view of the hypothesis of the possible generation of reactive oxygen species (ROS). Additionally, the incorporation of CNC@PDA CA films was analyzed to assess its effect as a mechanical reinforcement agent. The results showed an improvement in mechanical properties, with the 1% CNC@PDA film exhibiting the best balance between tensile strength and flexibility. Full article

Surface modification of membranes is essential for improving flux and resistance to contamination for membranes. This is of great significance for membrane distillation, which relies on the vapor pressure difference across the membrane as the driving force. In recent years, biomimetic mussel-inspired substances have become the research hotspots. Among them, dopamine serves as surface modifiers that would achieve highly desirable and effective membrane applications owing to their unique physicochemical properties, such as universal adhesion, enhanced hydrophilicity, tunable reducibility, and excellent thermal conductivity. The incorporation of a hydrophilic layer, along with the utilization of photothermal properties and post-functionalization capabilities in modified membranes, effectively addresses challenges such as low flux, contamination susceptibility, and temperature polarization during membrane distillation. However, to the best of our knowledge, there is still a lack of comprehensive and in-depth discussions. Therefore, this paper systematically compiles the modification method of dopamine on the membrane surface and summarizes its application and mechanism in membrane distillation for the first time. It is believed that this paper would provide a reference for dopamine-assisted membrane separation during production, and further promote its practical application. Full article

Medical device-associated infection remains a critical problem in the healthcare setting. Different clinical- or device-related methods have been attempted to reduce the infection rate. Among these approaches, creating a surface with bactericidal cationic functionality has been proposed. To do so, a sophisticated multi-step chemical procedure would be needed. Instead, a simple immersion approach was utilized in this investigation to render the titanium and polypropylene surface with the quaternary ammonium functionality by using a mussel-inspired novel lab-synthesized biomimetic catechol-terminated polymer, PQA-C8. The chemical oxidants, CuSO₄/H₂O₂, as well as dopamine, were added into the novel PQA-C8 polymer immersion solution for one-step surface modification. Additionally, a two-step immersion scheme, in which the polypropylene substrate was first immersed in the dopamine solution and then in the PQA-C8 solution, was also attempted. Surface analysis results indicated the surface characteristics of the modified substrates were affected by the immersion solution formulation as well as the procedure utilized. The antibacterial assay has shown the titanium substrates modified by the one-step dopamine + PQA-C8 mixtures with the oxidants added and the polypropylene modified by the two-step scheme exhibited bacterial reduction percentages greater than 90% against both Gram-positive S. aureus and Gram-negative E. coli and these antibacterial substrates were non-cytotoxic. Full article

Nanostructured materials and systems find various applications in biomedical fields. Hybrid organo–inorganic nanomaterials are intensively studied in a wide range of areas, from visualization to drug delivery or tissue engineering. One of the recent trends in material science is biomimetic approaches toward the synthesis or modification of functional nanosystems. Here, we describe an approach toward multifunctional nanomaterials through the biomimetic polymerization of dopamine derivatives. Magnetite nanoparticles were modified with a combination of dopamine conjugates to give multifunctional magneto-fluorescent nanocomposites in one synthetic step. The obtained material showed excellent biocompatibility at concentrations up to 200 $\mathsf{\mu }$g/mL and an in vivo biodistribution profile typical for nanosized formulations. The synthesized systems were conjugated with antibodies against HER2 to improve their selectivity toward HER2-positive cancer cells. The produced material can be used for dual magneto-optical in vivo studies or targeted drug delivery. The applied synthetic strategy can be used for the creation of various multifunctional hybrid nanomaterials in mild conditions. Full article

Organically-coated nanomaterials are intensively studied and find numerous applications in a wide range of areas from optics to biomedicine. One of the recent trends in material science is the application of bio-mimetic polydopamine coatings that can be produced on a variety of substrates in a cost-efficient way under mild conditions. Such coatings not only modify the biocompatibility of the material but also add functional amino groups to the surface that can be further modified by classic conjugation techniques. Here we show an alternative strategy for substrates modification using dopamine conjugates instead of native dopamine. Compared to the classic scheme, the proposed strategy allows separation of the “organic” and “colloidal” stages, and simplified identification and purification steps. Modification with pre-modified dopamine made it possible to achieve high loading capacities with active components up to 10.5% wt. A series of organo-inorganic hybrids were synthesized and their bioactivity was analyzed. Full article

Reverse osmosis (RO) membranes are widely used in the field of water treatment. However, there are inevitably various fouling problems during long-term use. Surface engineering of RO membranes, such as hydrophilic modification, has attracted broad attention for improving the anti-fouling performance. In this work, we constructed a green biomimetic composite modification layer on the surface of polyamide membranes using a dopamine (DA)/tannic acid (TA) co-deposited layer to bridge the polyamide surface and hydrophilic phytic acids (PhA). The DA/TA interlayer could firmly adhere to the RO membranes, reducing the aggregation of DA and providing abundant phenolic hydroxyl sites to graft PhA. Meanwhile, the anchored PhA molecule bearing six phosphate groups could effectively improve the superficial hydrophilicity. The membranes were characterized by the SEM, AFM, XPS, water contact angle test, and zeta potential test. After surface modification, the hydrophilicity, smoothness, and surface electronegativity were enhanced obviously. The flux and rejection of the virgin membrane were 76.05 L·m⁻²·h⁻¹ and 97.32%, respectively. While the modified D2/T4-PhA membrane showed decent permeability with a water flux of 57.37 L·m⁻²·h⁻¹ and a salt rejection of 98.29%. In the dynamic fouling test, the modified RO membranes demonstrated enhanced anti-fouling performance toward serum albumins (BSA), sodium alginates (SA), and dodecyl trimethyl ammonium bromides (DTAB). In addition, the modified membrane showed excellent stability in the 40 h long-term test. Full article

To enhance the interfacial adhesion between poly(p-phenylene terephthalamide) (PPTA) fibers and a rubber matrix without damaging the fiber structures, aminated carbon nanotubes (NH₂-CNTs) were mildly deposited onto the fiber surface by combining the biomimetic modification of dopamine via the Michael addition reaction. Furthermore, differences between the “one-step” method and the “two-step” method were researched through adjusting the addition sequence of NH₂-CNTs. The surface morphologies and chemical structures of PPTA fibers before and after modification were characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). The mechanical properties of fibers and the adhesive properties with rubber were tested using an electronic tensile tester of single-filament and universal testing machine, respectively. After modification by the “one-step” method for 24 h, the single-filament tensile strength of the modified fibers increased by 16.5%, meanwhile, the pull-out force of the modified fibers to rubber increased by approximately 59.7%. Compared with the “two-step” method, the “one-step” method had superiority due to the short reaction time and the large deposition rate of CNTs. Full article