Search Results (8)

Hyperspectral technology has been playing a leading role in monitoring oil spills in marine environments, which is an issue of international concern. In the case of monitoring oil spills in local areas, hyperspectral technology of small dimensions is the ideal solution. This research explores the use of encoded hyperspectral signatures to develop automated classifiers capable of discriminating between polluted and clean water and distinguishing between various types of oil. The overall objective is to leverage these classifiers to be able to improve the performance of conventional systems that rely solely on hyperspectral imagery. The acquisition of the hyperspectral signatures of water and hydrocarbons was carried out with a spectroradiometer. The range of the spectroradiometer used in this study covers the ranges between [350–1000] (visible near-infrared) and [1000–2500] (short-wavelength infrared). This gives detailed information regarding the targets of interest. Different neural autoencoders (AEs) have been developed to reduce inputs into different dimensions, from 1 to 15. Each of these encoded sets was used to train decision tree (DT) classifiers. The results are very promising, as they show that the AE models encoded data with correlation coefficients above 0.95. The classifiers trained with the different sets provide accuracies close to 1. Full article

Weeds are found on every cropland across the world. Weeds compete for light, water, and nutrients with attractive plants, introduce illnesses or viruses, and attract harmful insects and pests, resulting in yield loss. New weed detection technologies have been developed in recent years to increase weed detection speed and accuracy, resolving the contradiction between the goals of enhancing soil health and achieving sufficient weed control for profitable farming. In recent years, a variety of platforms, such as satellites, airplanes, unmanned aerial vehicles (UAVs), and close-range platforms, have become more commonly available for gathering hyperspectral images with varying spatial, temporal, and spectral resolutions. Plants must be divided into crops and weeds based on their species for successful weed detection. Therefore, hyperspectral image categorization also has become popular since the development of hyperspectral image technology. Unmanned aerial vehicle (UAV) hyperspectral imaging techniques have recently emerged as a valuable tool in agricultural remote sensing, with tremendous promise for weed detection and species separation. Hence, this paper will review the weeds problem in rice fields in Malaysia and focus on the application of hyperspectral remote sensing imagery (HRSI) for weed detection with algorithms and modelling employed for weeds discrimination analysis. Full article

Efforts to monitor terrestrial decomposition dynamics at broad spatial scales are hampered by the lack of a cost-effective and scalable means to track the decomposition process. Recent advances in remote sensing have enabled the simulation of litter spectra throughout decomposition for grasses in general, yet unique decomposition pathways are hypothesized to create subtly different litter spectral signatures with unique ecosystem functional significance. The objectives of this study were to improve spectra–decomposition linkages and thereby enable the more comprehensive monitoring of ecosystem processes such as nutrient and carbon cycles. Using close-range hyperspectral imaging, litter spectra and multiple decomposition metrics were concurrently monitored in four classes of naturally decayed litter under four decomposition treatments. The first principal component accounted for approximately 94% of spectral variation in the close-range imagery and was attributed to the progression of decomposition. Decomposition-induced spectral changes were moderately correlated with the leaf carbon to nitrogen ratio (R² = 0.52) and sodium hydroxide extractables (R² = 0.45) but had no correlation with carbon dioxide flux. Temperature and humidity strongly influenced the decomposition process but did not influence spectral variability or the patterns of surface decomposition. The outcome of the study is that litter spectra are linked to important metrics of decomposition and thus remote sensing could be utilized to assess decomposition dynamics and the implications for nutrient recycling at broad spatial scales. A secondary study outcome is the need to resolve methodological challenges related to inducing unique decomposition pathways in a lab environment. Improving decomposition treatments that mimic real-world conditions of temperature, humidity, insolation, and the decomposer community will enable an improved understanding of the impacts of climatic change, which are expected to strongly affect microbially mediated decomposition. Full article

Wildfires pose a direct threat when occurring close to populated areas. Additionally, their significant carbon and climate feedbacks represent an indirect threat on a global, long-term scale. Monitoring and analyzing wildfires is therefore a crucial task to increase the understanding of interconnections between fire and ecosystems, in order to improve wildfire management activities. This study investigates the suitability of 232 different red/near-infrared band combinations based on hyperspectral imagery of the DESIS sensor with regard to burnt area detection accuracy. It is shown that the selection of wavelengths greatly influences the detection quality, and that especially the utilization of lower near-infrared wavelengths increases the yielded accuracy. For burnt area analysis based on the Normalized Difference Vegetation Index (NDVI), the optimal wavelength range has been found to be 660–670 nm and 810–835 nm for the red band and near-infrared band, respectively. Full article

This study aims to assess the feasibility of delineating and identifying mineral ores from hyperspectral images of tin–tungsten mine excavation faces using machine learning classification. We compiled a set of hand samples of minerals of interest from a tin–tungsten mine and analyzed two types of hyperspectral images: (1) images acquired with a laboratory set-up under close-to-optimal conditions, and (2) a scan of a simulated mine face using a field set-up, under conditions closer to those in the gallery. We have analyzed the following minerals: cassiterite (tin ore), wolframite (tungsten ore), chalcopyrite, malachite, muscovite, and quartz. Classification (Linear Discriminant Analysis, Singular Vector Machines and Random Forest) of laboratory spectra had a very high overall accuracy rate (98%), slightly lower if the 450–950 nm and 950–1650 nm ranges are considered independently, and much lower (74.5%) for simulated conventional RGB imagery. Classification accuracy for the simulation was lower than in the laboratory but still high (85%), likely a consequence of the lower spatial resolution. All three classification methods performed similarly in this case, with Random Forest producing results of slightly higher accuracy. The user’s accuracy for wolframite was 85%, but cassiterite was often confused with wolframite (user’s accuracy: 70%). A lumped ore category achieved 94.9% user’s accuracy. Our study confirms the suitability of hyperspectral imaging to record the spatial distribution of ore mineralization in progressing tungsten–tin mine faces. Full article

Biocrusts, topsoil communities formed by mosses, lichens, liverworts, algae, and cyanobacteria, are a key biotic component of dryland ecosystems worldwide. Experiments carried out with lichen- and moss-dominated biocrusts indicate that climate change may dramatically reduce their cover and diversity. Therefore, the development of reproducible methods to monitor changes in biocrust diversity and abundance across multiple spatio-temporal scales is key for evaluating how climate change may impact biocrust communities and the myriad of ecosystem functions and services that rely on them. In this study, we collected lichen-dominated biocrust samples from a semi-arid ecosystem in central Spain. Their α-diversity was then evaluated using very high spatial resolution hyperspectral images (pixel size of 0.091 mm) measured in laboratory under controlled conditions. Support vector machines were used to map the biocrust composition. Traditional α-diversity metrics (i.e., species richness, Shannon’s, Simpson’s, and Pielou’s indices) were calculated using lichen fractional cover data derived from their classifications in the hyperspectral imagery. Spectral diversity was calculated at different wavelength ranges as the coefficient of variation of different regions of the reflectance spectra of lichens and as the standard deviation of the continuum removal algorithm (SD_CR). The accuracy of the classifications of the images obtained was close to 100%. The results showed the best coefficient of determination (r² = 0.47) between SD_CR calculated at 680 nm and the α-diversity calculated as the Simpson’s index, which includes species richness and their evenness. These findings indicate that this spectral diversity index could be used to track spatio-temporal changes in lichen-dominated biocrust communities. Thus, they are the first step to monitor α-diversity of biocrust-forming lichens at the ecosystem and regional levels, a key task for any program aiming to evaluate changes in biodiversity and associated ecosystem services in drylands. Full article

The impacts of human activity on coastal ecosystems are becoming increasingly evident across the world. Consequently, there is a growing need to map, monitor, and manage these regions in a sustainable manner. In this pilot study, we present what we believe to be a novel mapping technique for shallow-water seafloor habitats: Underwater hyperspectral imaging (UHI) from an unmanned surface vehicle (USV). A USV-based UHI survey was carried out in a sheltered bay close to Trondheim, Norway. In the survey, an area of 176 m² was covered, and the depth of the surveyed area was approximately 1.5 m. UHI data were initially recorded at a 1-nm spectral resolution within the range of 380–800 nm, but this was reduced to 86 spectral bands between 400-700 nm (3.5-nm spectral resolution) during post-processing. The hyperspectral image acquisition was synchronized with navigation data from the USV, which permitted georeferencing and mosaicking of the imagery at a 0.5-cm spatial resolution. Six spectral classes, including coralline algae, the wrack Fucus serratus, green algal films, and invertebrates, were identified in the georeferenced imagery, and chosen as targets for support vector machine (SVM) classification. Based on confusion matrix analyses, the overall classification accuracy was estimated to be 89%–91%, which suggests that USV-based UHI may serve as a useful tool for high-resolution mapping of shallow-water habitats in the future. Full article

Hyperspectral remote sensing provides a wealth of data essential for vegetation studies encompassing a wide range of applications (e.g., species diversity, ecosystem monitoring, etc.). The development and implementation of UAV-based hyperspectral systems have gained popularity over the last few years with novel efforts to demonstrate their operability. Here we describe the design, implementation, testing, and early results of the UAV-μCASI system, which showcases a relatively new hyperspectral sensor suitable for ecological studies. The μCASI (288 spectral bands) was integrated with a custom IMU-GNSS data recorder built in-house and mounted on a commercially available hexacopter platform with a gimbal to maximize system stability and minimize image distortion. We deployed the UAV-μCASI at three sites with different ecological characteristics across Canada: The Mer Bleue peatland, an abandoned agricultural field on Ile Grosbois, and the Cowichan Garry Oak Preserve meadow. We examined the attitude data from the flight controller to better understand airframe motion and the effectiveness of the integrated Differential Real Time Kinematic (RTK) GNSS. We describe important aspects of mission planning and show the effectiveness of a bundling adjustment to reduce boresight errors as well as the integration of a digital surface model for image geocorrection to account for parallax effects at the Mer Bleue test site. Finally, we assessed the quality of the radiometrically and atmospherically corrected imagery from the UAV-μCASI and found a close agreement (<2%) between the image derived reflectance and in-situ measurements. Overall, we found that a flight speed of 2.7 m/s, careful mission planning, and the integration of the bundling adjustment were important system characteristics for optimizing the image quality at an ultra-high spatial resolution (3–5 cm). Furthermore, environmental considerations such as wind speed (<5 m/s) and solar illumination also play a critical role in determining image quality. With the growing popularity of “turnkey” UAV-hyperspectral systems on the market, we demonstrate the basic requirements and technical challenges for these systems to be fully operational. Full article