Search Results (12)

The investigation into potential hazards linked with millimeter-wave (mmWave) radiation is crucial, given the widespread adoption of body-centric wireless sensor nodes operating within this frequency band. This is particularly pertinent in light of its envisaged use for the upcoming 5G/6G networks and beyond. As 6G is anticipated to leverage a broad spectrum, including both sub-6 GHz and mmWave bands (30–300 GHz), concerns arise regarding increased human exposure to non-ionizing radiation (NIR). This work highlights the advantages of deploying 6G in the mmWave band, focusing on evaluating human body exposure to NIR interactions. Additionally, this research aims to address mmWave NIR exposure by introducing a Distributed Base Station (DBS) network. Utilizing low-power remote antennas to extend network coverage, the DBS architecture seeks to effectively minimize NIR’s impact without compromising overall network performance. The findings underscore the significant potential of the DBS approach in mitigating NIR-related concerns associated with mmWave utilization in 6G networks. Full article

Medical cyber-physical systems (MCPS) represent a platform through which patient health data are acquired by emergent Internet of Things (IoT) sensors, preprocessed locally, and managed through improved machine intelligence algorithms. Wireless medical cyber-physical systems are extensively adopted in the daily practices of medicine, where vast amounts of data are sampled using wireless medical devices and sensors and passed to decision support systems (DSSs). With the development of physical systems incorporating cyber frameworks, cyber threats have far more acute effects, as they are reproduced in the physical environment. Patients’ personal information must be shielded against intrusions to preserve their privacy and confidentiality. Therefore, every bit of information stored in the database needs to be kept safe from intrusion attempts. The IWMCPS proposed in this work takes into account all relevant security concerns. This paper summarizes three years of fieldwork by presenting an IWMCPS framework consisting of several components and subsystems. The IWMCPS architecture is developed, as evidenced by a scenario including applications in the medical sector. Cyber-physical systems are essential to the healthcare sector, and life-critical and context-aware health data are vulnerable to information theft and cyber-okayattacks. Reliability, confidence, security, and transparency are some of the issues that must be addressed in the growing field of MCPS research. To overcome the abovementioned problems, we present an improved wireless medical cyber-physical system (IWMCPS) based on machine learning techniques. The heterogeneity of devices included in these systems (such as mobile devices and body sensor nodes) makes them prone to many attacks. This necessitates effective security solutions for these environments based on deep neural networks for attack detection and classification. The three core elements in the proposed IWMCPS are the communication and monitoring core, the computational and safety core, and the real-time planning and administration of resources. In this study, we evaluated our design with actual patient data against various security attacks, including data modification, denial of service (DoS), and data injection. The IWMCPS method is based on a patient-centric architecture that preserves the end-user’s smartphone device to control data exchange accessibility. The patient health data used in WMCPSs must be well protected and secure in order to overcome cyber-physical threats. Our experimental findings showed that our model attained a high detection accuracy of 92% and a lower computational time of 13 sec with fewer error analyses. Full article

Wearable technology to augment traditional approaches are increasingly being added to the arsenals of treatment providers. Wearable technology generally refers to electronic systems, devices, or sensors that are usually worn on or are in close proximity to the human body. Wearables may be stand-alone or integrated into materials that are worn on the body. What sets medical wearables apart from other systems is their ability to collect, store, and relay information regarding an individual’s current body status to other devices operating on compatible networks in naturalistic settings. The last decade has witnessed a steady increase in the use of wearables specific to the orofacial region. Applications range from supplementing diagnosis, tracking treatment progress, monitoring patient compliance, and better understanding the jaw’s functional and parafunctional activities. Orofacial wearable devices may be unimodal or incorporate multiple sensing modalities. The objective data collected continuously, in real time, in naturalistic settings using these orofacial wearables provide opportunities to formulate accurate and personalized treatment strategies. In the not-too-distant future, it is anticipated that information about an individual’s current oral health status may provide patient-centric personalized care to prevent, diagnose, and treat oral diseases, with wearables playing a key role. In this review, we examine the progress achieved, summarize applications of orthodontic relevance and examine the future potential of orofacial wearables. Full article

The advances in the miniaturisation of electronic devices and the deployment of cheaper and faster data networks have propelled environments augmented with contextual and real-time information, such as smart homes and smart cities. These context-aware environments have opened the door to numerous opportunities for providing added-value, accurate and personalised services to citizens. In particular, smart healthcare, regarded as the natural evolution of electronic health and mobile health, contributes to enhance medical services and people’s welfare, while shortening waiting times and decreasing healthcare expenditure. However, the large number, variety and complexity of devices and systems involved in smart health systems involve a number of challenging considerations to be considered, particularly from security and privacy perspectives. To this aim, this article provides a thorough technical review on the deployment of secure smart health services, ranging from the very collection of sensors data (either related to the medical conditions of individuals or to their immediate context), the transmission of these data through wireless communication networks, to the final storage and analysis of such information in the appropriate health information systems. As a result, we provide practitioners with a comprehensive overview of the existing vulnerabilities and solutions in the technical side of smart healthcare. Full article

This manuscript presents a novel mechanism (at the physical layer) for authentication and transmitter identification in a body-centric nanoscale communication system operating in the terahertz (THz) band. The unique characteristics of the propagation medium in the THz band renders the existing techniques (say for impersonation detection in cellular networks) not applicable. In this work, we considered a body-centric network with multiple on-body nano-senor nodes (of which some nano-sensors have been compromised) who communicate their sensed data to a nearby gateway node. We proposed to protect the transmissions on the link between the legitimate nano-sensor nodes and the gateway by exploiting the path loss of the THz propagation medium as the fingerprint/feature of the sender node to carry out authentication at the gateway. Specifically, we proposed a two-step hypothesis testing mechanism at the gateway to counter the impersonation (false data injection) attacks by malicious nano-sensors. To this end, we computed the path loss of the THz link under consideration using the high-resolution transmission molecular absorption (HITRAN) database. Furthermore, to refine the outcome of the two-step hypothesis testing device, we modeled the impersonation attack detection problem as a hidden Markov model (HMM), which was then solved by the classical Viterbi algorithm. As a bye-product of the authentication problem, we performed transmitter identification (when the two-step hypothesis testing device decides no impersonation) using (i) the maximum likelihood (ML) method and (ii) the Gaussian mixture model (GMM), whose parameters are learned via the expectation–maximization algorithm. Our simulation results showed that the two error probabilities (missed detection and false alarm) were decreasing functions of the signal-to-noise ratio (SNR). Specifically, at an SNR of 10 dB with a pre-specified false alarm rate of $0.2$, the probability of correct detection was almost one. We further noticed that the HMM method outperformed the two-step hypothesis testing method at low SNRs (e.g., a $10\%$ increase in accuracy was recorded at SNR = −5 dB), as expected. Finally, it was observed that the GMM method was useful when the ground truths (the true path loss values for all the legitimate THz links) were noisy. Full article

In this paper a dual band, a dual band Planar Inverted F antenna (PIFA) is designed for wireless communication intended to be used in wireless body sensor networks. The designed PIFA operates at two different frequency bands, 2.45 GHz Industrial, Scientific and Medical band (ISM) and 5.2 GHz (HiperLAN band). In body-centric wireless networks, antennas need to be integrated with wireless wearable sensors. An antenna is an essential part of wearable body sensor networks. For on-body communications, antennas need to be less sensitive to human body effects. For body-centric communications, wearable devices need to communicate with the devices located over the surface, and there is a need of communication from on-body devices to off-body units. Based on this need, a dual band planar inverted F antenna is designed that works at two different frequency bands, i.e., 2.45 GHz and 5.2 GHz. The 2.45 GHz is proposed for establishing communication among the wireless sensor devices attached to the human body, while 5.2 GHz is proposed for the communications for from on-body to off-body devices. The proposed antenna is very compact, and due to having ground plane at the backside it is less sensitive to the effects of the human body tissues. Computer Simulation Technology (CST) microwave studio™ was used for antenna design and simulation purposes. Performance parameters such as return loss, bandwidth, radiation pattern and efficiency of this antenna are shown and investigated. These performance parameters of the proposed antenna have been investigated at free space and close proximity to the human body. Simulation results and analysis show that the performance parameters produce very good results for both frequency bands. Due to its compact size, low sensitivity to human body tissues, and dual band functionality, it will be a good candidate for wireless wearable body sensor networks. Full article

Wearable telemonitoring of electrocardiogram (ECG) based on wireless body Area networks (WBAN) is a promising approach in next-generation patient-centric telecardiology solutions. In order to guarantee long-term effective operation of monitoring systems, the power consumption of the sensors must be strictly limited. Compressed sensing (CS) is an effective method to alleviate this problem. However, ECG signals in WBAN are usually non-sparse, and most traditional compressed sensing recovery algorithms have difficulty recovering non-sparse signals. In this paper, we proposed a fast and robust non-sparse signal recovery algorithm for wearable ECG telemonitoring. In the proposed algorithm, the alternating direction method of multipliers (ADMM) is used to accelerate the speed of block sparse Bayesian learning (BSBL) framework. We used the famous MIT-BIH Arrhythmia Database, MIT-BIH Long-Term ECG Database and ECG datasets collected in our practical wearable ECG telemonitoring system to verify the performance of the proposed algorithm. The experimental results show that the proposed algorithm can directly recover ECG signals with a satisfactory accuracy in a time domain without a dictionary matrix. Due to acceleration by ADMM, the proposed algorithm has a fast speed, and also it is robust for different ECG datasets. These results suggest that the proposed algorithm is very promising for wearable ECG telemonitoring. Full article

Wireless sensor networks are being increasingly used in several application areas, particularly to collect data and monitor physical processes. Non-functional requirements, like reliability, security or availability, are often important and must be accounted for in the application development. For that purpose, there is a large body of knowledge on dependability techniques for distributed systems, which provide a good basis to understand how to satisfy these non-functional requirements of WSN-based monitoring applications. Given the data-centric nature of monitoring applications, it is of particular importance to ensure that data are reliable or, more generically, that they have the necessary quality. In this survey, we look into the problem of ensuring the desired quality of data for dependable monitoring using WSNs. We take a dependability-oriented perspective, reviewing the possible impairments to dependability and the prominent existing solutions to solve or mitigate these impairments. Despite the variety of components that may form a WSN-based monitoring system, we give particular attention to understanding which faults can affect sensors, how they can affect the quality of the information and how this quality can be improved and quantified. Full article

Recently, Wireless Body Area Networks (WBANs) have become an emerging technology in healthcare, where patients are equipped withwearable and implantable body sensor nodes to gather sensory information for remote monitoring. The increasing development of coordinator devices on patients enables the internetworking of WBANs in heterogeneous wireless networks to deliver physiological information that is collected at remote terminals in a timely fashion. However, in this type of network, providing a seamless handover with a guaranteed Quality of Service (QoS), especially emergency services, is a challenging task. In this paper, we proposed an effective Multi-Attribute Decision-Making (MADM) handover algorithm that guarantees seamless connectivity. A patient’s mobile devices automatically connect to the best network that fulfills the QoS requirements of different types of applications. Additionally, we integrated a Content-Centric Networking (CCN) processing module into different wireless networks to reduce packet loss, enhance QoS and avoid unnecessary handovers by leveraging in-network caching to achieve efficient content dissemination for ubiquitous healthcare. Simulation results proved that our proposed approach forthe model with CCN outperforms the model without CCN and Received Signal Strength Vertical Handoff (RSS-VHD) in terms of the number of handovers, enhancing QoS, packet loss, and energy efficiency. Full article

Body-worn sensor networks are important for rescue-workers, medical and many other applications. Sensitive data are often transmitted over such a network, motivating the need for encryption. Body-worn sensor networks are deployed in conditions where the wireless communication channel varies dramatically due to fading and shadowing, which is considered a disadvantage for communication. Interestingly, these channel variations can be employed to extract a common encryption key at both sides of the link. Legitimate users share a unique physical channel and the variations thereof provide data series on both sides of the link, with highly correlated values. An eavesdropper, however, does not share this physical channel and cannot extract the same information when intercepting the signals. This paper documents a practical wearable communication system implementing channel-based key generation, including an implementation and a measurement campaign comprising indoor as well as outdoor measurements. The results provide insight into the performance of channel-based key generation in realistic practical conditions. Employing a process known as key reconciliation, error free keys are generated in all tested scenarios. The key-generation system is computationally simple and therefore compatible with the low-power micro controllers and low-data rate transmissions commonly used in wireless sensor networks. Full article

A novel, fully-autonomous, wearable, wireless sensor network is presented, where each flexible textile node performs cooperative synchronous acquisition and distributed event detection. Computationally efficient situational-awareness algorithms are implemented on the low-power microcontroller present on each flexible node. The detected events are wirelessly transmitted to a base station, directly, as well as forwarded by other on-body nodes. For each node, a dual-polarized textile patch antenna serves as a platform for the flexible electronic circuitry. Therefore, the system is particularly suitable for comfortable and unobtrusive integration into garments. In the meantime, polarization diversity can be exploited to improve the reliability and energy-efficiency of the wireless transmission. Extensive experiments in realistic conditions have demonstrated that this new autonomous, body-centric, textile-antenna, wireless sensor network is able to correctly detect different operating conditions of a firefighter during an intervention. By relying on four network nodes integrated into the protective garment, this functionality is implemented locally, on the body, and in real time. In addition, the received sensor data are reliably transferred to a central access point at the command post, for more detailed and more comprehensive real-time visualization. This information provides coordinators and commanders with situational awareness of the entire rescue operation. A statistical analysis of measured on-body node-to-node, as well as off-body person-to-person channels is included, confirming the reliability of the communication system. Full article

In this paper, we address Quality-of-Service (QoS)-aware routing issue for Body Sensor Networks (BSNs) in delay and reliability domains. We propose a data-centric multiobjective QoS-Aware routing protocol, called DMQoS, which facilitates the system to achieve customized QoS services for each traffic category differentiated according to the generated data types. It uses modular design architecture wherein different units operate in coordination to provide multiple QoS services. Their operation exploits geographic locations and QoS performance of the neighbor nodes and implements a localized hop-by-hop routing. Moreover, the protocol ensures (almost) a homogeneous energy dissipation rate for all routing nodes in the network through a multiobjective Lexicographic Optimization-based geographic forwarding. We have performed extensive simulations of the proposed protocol, and the results show that DMQoS has significant performance improvements over several state-of-the-art approaches. Full article