Search Results (6)

The large-scale conversion of forests to agriculture has caused biodiversity loss, climate change, and disrupted dietary fatty acid balances, with adverse public health effects. Wild edibles like pine nuts, especially Pinus cembroides, provide sustainable solutions by supporting ecosystems and offering economic value. However, variability in seed quality limits market potential, and lipidomic studies on P. cembroides remain sparse. This paper underscores the ecological, social, and nutritional value of P. cembroides while advocating for advanced research to enhance its use as a non-timber forest resource in Mexico’s communal areas. It explores various analytical techniques, such as nuclear magnetic resonances (NMR), chromatography coupled with mass spectrometry (HPLC-MS, GC-MS) and GC coupled with flame ionization detector (GC-FID), highlighting extraction methods like derivatization, purification, and thin-layer chromatography. Likewise, some considerations are addressed for the treatment of data obtained in the detection of fatty acids from bioformatics and the evaluation of the data through statistical methods and artificial intelligence and deep learning. These approaches aim to improve fatty acid profiling and seed quality assessments, fostering the species economic viability and supporting sustainable livelihoods in rural communities, encouraging researchers across the country to explore the fatty acid composition of different P. cembroides populations can drive valuable insights into its nutritional and ecological significance. Such efforts can enhance understanding of regional variations, promote sustainable use, and elevate the specie’s economic and scientific value. Full article

In an attempt to reutilize marble waste, a new approach is presented in the current study to promote its use in the field of shielding against ionizing radiation. In this study, we aimed to develop a novel and sustainable/eco-friendly lead-free radiation shielding material by improving artificial marble (AM) produced from marble waste combined with polyester by reinforcing it with bismuth oxide (Bi₂O₃) nanoparticles. Six samples of AM samples doped with different concentrations ($0\%$,$5\%$,$10\%$,$15\%$, $20\%$, and $25\%$) of Bi₂O₃ nanoparticles were prepared. The linear attenuation coefficient ($LAC$) values were measured experimentally through the narrow beam method at different energies $(0.0595 \mathrm{M}\mathrm{e}\mathrm{V}$, $0.6617 \mathrm{M}\mathrm{e}\mathrm{V}$, $1.1730 \mathrm{M}\mathrm{e}\mathrm{V}$, and $1.330 \mathrm{M}\mathrm{e}\mathrm{V}$) for all samples with various concentrations of Bi₂O₃. Radiological shielding parameters such as half value layer ($HVL$), tenth-value layer ($TVL$), and radiation shielding efficiency ($RSE$) were estimated and compared for all the different samples. The results prove that increasing the concentration of Bi₂O₃ leads to the enhancement of the radiation shielding properties of the AM as a shielding material. It was observed that as the energy increases, the efficiency of the samples falls. High energy dependence was found when calculating the $HVL$ and $TVL$ values of the samples, which increased with increases in the energy of the incident photons. A comparison between the sample with the most efficient gamma radiation attenuation capability (AM-$25\%$), concrete, and lead was conducted, and a discussion regarding their radiation shielding properties is presented herein. The results show that the AM-$25\%$ sample is superior to the ordinary concrete over all the studied energy ranges, as evidenced by its significantly lower $HVLs$. On the contrary, lead is superior to the AM-$25\%$ sample over all the studied energy ranges owing to its unbeatable density as a shielding material. Overall, this new type of artificial marble has the potential to be used as a radiation shielding material at low- to medium-gamma energy regions, specifically in medical imaging and radiation therapy. Full article

Irradiating solid materials with energetic ions are extensively used to explore the evolution of structural damage and specific properties in structural and functional materials under natural and artificial radiation environments. Lithium niobate on insulator (LNOI) technology is revolutionizing the lithium niobate industry and has been widely applied in various fields of photonics, electronics, optoelectronics, etc. Based on 30 MeV ³⁵Cl and ⁴⁰Ar ion irradiation, thermal spike responses and microstructure evolution of LNOI under the action of extreme electronic energy loss are discussed in detail. Combining experimental transmission electron microscopy characterizations with numerical calculations of the inelastic thermal spike model, discontinuous and continuous tracks with a lattice disorder structure in the crystalline LiNbO₃ layer and recrystallization in the amorphous SiO₂ layer are confirmed, and the ionization process via energetic ion irradiation is demonstrated to inherently connect energy exchange and temperature evolution processes in the electron and lattice subsystems of LNOI. According to Rutherford backscattering/channeling spectrometry and the direct impact model, the calculated track damage cross–section is further verified, coinciding with the experimental observations, and the LiNbO₃ layer with a thickness of several hundred nanometers presents track damage behavior similar to that of bulk LiNbO₃. Systematic research into the damage responses of LNOI is conducive to better understanding and predicting radiation effects in multilayer thin film materials under extreme radiation environments, as well as to designing novel multifunctional devices. Full article

For five decades it has been known that the pentamer of B subunits (choleragenoid) of the cholera toxin (CT) of Vibrio cholerae binds with high preference to the ganglioside GM1 (II³Neu5Ac-Gg4Cer). However, the exact structures of CT-binding GM1 lipoforms of primary human colon epithelial cells (pHCoEpiCs) have not yet been described in detail. The same holds true for generating further GM1 receptor molecules from higher sialylated gangliosides with a GM1 core through the neuraminidase of V. cholerae. To avoid the artificial incorporation of exogenous gangliosides from animal serum harboring GM1 and higher sialylated ganglio-series gangliosides, pHCoEpiCs were cultured in serum-free medium. Thin-layer chromatography overlay binding assays using a choleragenoid combined with electrospray ionization mass spectrometry revealed GM1 lipoforms with sphingosine (d18:1) as the sole sphingoid base linked to C14:0, C16:0, C18:0 or C20:0 fatty acyl chains forming the ceramide (Cer) moieties of the main choleragenoid-binding GM1 species. Desialylation of GD1a (IV³Neu5Ac,II³Neu5Ac-Gg4Cer) and GT1b (IV³Neu5Ac,II³(Neu5Ac)₂-Gg4Cer) of pHCoEpiCs by V. cholerae neuraminidase was observed. GD1a-derived GM1 species with stable sphingosine (d18:1) and saturated fatty acyl chains varying in chain length from C16:0 up to C22:0 could be identified, indicating the ingenious interplay between CT and the neuraminidase of V. cholerae recruiting additional GM1 receptors of pHCoEpiCs. Full article

This investigation is dedicated to unlocking the hidden potential of discarded cosmetics towards building green sustainable road pavements in the future. It is particularly aiming at exploring waste lipstick (WLS) as a high-quality functional additive for advanced asphalt mix technologies. To fuel this novel innovation, the effect of various WLS doses (e.g., 5, 10, and 15 wt.%) on the performance of base AP-5 asphalt cement was studied in detail. A wide array of cutting-edge analytical lab techniques was employed to inspect in-depth the physicochemical, microstructural, thermo-morphological, and rheological properties of resultant admixtures including: elemental analysis, Fourier transform-infrared spectroscopy (FT-IR), X-ray diffraction (XRD), thin-layer chromatography-flame ionization detection (TLC-FID), scanning electron microscopy (SEM), atomic force microscopy (AFM), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), needle penetration, ring and ball softening point, Brookfield viscometer, ductility, and dynamic shear rheometer (DSR) tests. Unlike the unstable response of asphaltenes, the additive/artificial aging treatments increased the fraction of resins the most, and decreased that of aromatics; however, asphaltenes did not impair the saturates portion, according to Iatroscan research. FT-IR scan divulged that the WLS-asphalt interaction was physical rather than chemical. XRD diagnosis not only revealed an obvious correlation between the asphaltenes content and the fresh-binder crystallinity but also revealed the presence of fillers in the WLS, which may generate outstanding technical qualities to bituminous mixes. According to AFM/SEM analyses, the stepwise incorporation of WLS grew the magnitude of the “bee-shaped” microstructures and extended the roughness rate of unaged/aged binders. The prolonged consumption of the high thermal-stable additive caused a remarkable drop in the onset degradation and glass transition temperature of mixtures, thus enhancing their workability and low-temperature performance, according to TGA/DTGA/DSC data. The DSR and empirical rheological experiments demonstrated that the WLS could effectively lower the manufacturing and compaction temperatures of asphalt mixes and impart them with valuable anti-aging/fatigue-cracking assets. In a nutshell, the use of waste lipstick as an asphalt modifier is viable and cost-effective and could attenuate the pollution arisen from the beauty sector, while improving the performance of hot/warm asphalt mixes (HAM/WAM) and extending the service life of roadways. Full article

Featured observations of high frequency (HF) heating experiments are first introduced; the uniqueness of each observation is presented; the likely cause and physical process of each observed phenomenon instigated by the HF heating are discussed. A special point in the observations, revealed through the ionograms, is the competition between the Langmuir parametric instability and upper hybrid parametric instability excited in the heating experiments and the impact of the natural cusp at foE (the peak plasma frequency of the ionospheric E region) on the competition. The ionograms also infer the generation of Langmuir and upper hybrid cavitons. Ray tracing theory is formulated. With and without the appearance of large-scale field-aligned density irregularities in the background ionosphere, ray trajectories of the ordinary mode (O-mode) and extraordinary mode (X-mode) sounding pulses are calculated numerically. The results explain the artificial Spread-F recorded by the digisondes in the heating experiments. Parametric instabilities, which are the directly relevant processes to achieve effective heating of the ionospheric F region, are formulated and analyzed. The threshold fields and growth rates of Langmuir and upper hybrid parametric instabilities are derived as the theoretical basis of many radar observations and electron-plasma wave interactions. Harmonic cyclotron resonance interaction processes between electrons and upper hybrid waves are introduced. Formulation and analysis are presented. The numerical results show that ultra-energetic electrons are generated. These electrons enhance airglow at 777.4 nm as well as cause ionization. Physical processes leading to the generation of artificial ionization layers are discussed. The nonlinear Schrodinger equation governing the nonlinear evolution of Langmuir waves and upper hybrid waves are derived and solved. The nonlinear periodic and solitary solutions of the equations are obtained. The localized Langmuir and upper hybrid waves generated by the HF heater form cavitons near the HF reflection layer and near the upper hybrid resonance layer, which induce bumps in the virtual height spread of the ionogram trace similar to that induced by the density cusp at E-F1 transition layer; the down-going Langmuir waves and upper hybrid waves evolve into nonlinear periodic waves propagating along the magnetic field, which backscatter incoherently the sounding pulses to cause downward virtual height spread. Full article