Search Results (6)

A finite element model of the local mechanical response of a filled polymer composite to uniaxial compression is presented. The interfacial layer between filler particles and polymer matrix is explicitly modeled as a third phase of the composite. Unit cells containing one or several anisometric filler particles surrounded by interface shells are considered. The dependence of the mechanical response of the cells to external deformation on the interface thickness and stiffness is studied. The use of the particle–matrix interface as a damping tool in mesoscopic polymer-composite problems with large deformations is discussed. The influence of the interface on the anisotropy of the composite response is considered. Full article

A comprehensive study was performed on the supramolecular ordering and optical properties of thin nanostructured glycerohydrogel sol-gel plates based on chitosan L- and D-aspartate and their individual components in the X-ray, UV, visible, and IR ranges. Our comparative analysis of chiroptical characteristics, optical collimated transmittance, the average cosine of the scattering angle, microrelief and surface asymmetry, and the level of structuring shows a significant influence of the wavelength range of electromagnetic radiation and the enantiomeric form of aspartic acid on the functional characteristics of the sol-gel materials. At the macrolevel of the supramolecular organization, a complex topography of the surface layer and a dense amorphous–crystalline ordering of polymeric substances were revealed, while at the nanolevel, there were two forms of voluminous scattering domains: nanospheres with diameters of 60–120 nm (L-) and 45–55 nm (D-), anisometric particles of lengths within ~100–160 (L-) and ~85–125 nm (D-), and widths within ~10–20 (L-) and ~20–30 nm (D-). The effect of optical clearing on glass coated with a thin layer of chitosan L-(D-)aspartate in the near-UV region was discovered (observed for the first time for chitosan-based materials). The resulting nanocomposite shape-stable glycerohydrogels seem promising for sensorics and photonics. Full article

A finite-element model of the mechanical response of a magnetoactive elastomer (MAE) volume element is presented. Unit cells containing a single ferromagnetic inclusion with geometric and magnetic anisotropy are considered. The equilibrium state of the cell is calculated using the finite-element method and cell energy minimization. The response of the cell to three different excitation modes is studied: inclusion rotation, inclusion translation, and uniaxial cell stress. The influence of the magnetic properties of the filler particles on the equilibrium state of the MAE cell is considered. The dependence of the mechanical response of the cell on the filler concentration and inclusion anisometry is calculated and analyzed. Optimal filler shapes for maximizing the magnetic response of the MAE are discussed. Full article

This study aimed to develop a semisolid vehicle for topical delivery of nanoencapsulated St. John’s wort (SJW) extract, rich in hyperforin (HP), and explore its wound-healing potential. Four nanostructured lipid carriers (NLCs) were obtained: blank and HP-rich SJW extract-loaded (HP-NLC). They comprised glyceryl behenate (GB) as a solid lipid, almond oil (AO), or borage oil (BO) representing the liquid lipid, along with polyoxyethylene (20) sorbitan monooleate (PSMO) and sorbitan monooleate (SMO) as surfactants. The dispersions demonstrated anisometric nanoscale particles with acceptable size distribution and disrupted crystalline structure, providing entrapment capacity higher than 70%. The carrier exhibiting preferable characteristics (HP-NLC2) was gelled with Poloxamer 407 (PM407) to serve as the hydrophilic phase of a bigel, to which the combination of BO and sorbitan monostearate (SMS) organogel was added. The eight prepared bigels with different proportions (blank and nanodispersion-loaded) were characterized rheologically and texturally to investigate the impact of the hydrogel-to-oleogel ratio. The therapeutic potential of the superior formulation (HP-NLC-BG2) was evaluated in vivo on Wistar male rats through the tensile strength test on a primary-closed incised wound. Compared with a commercial herbal semisolid and a control group, the highest tear resistance (7.764 ± 0.13 N) was achieved by HP-NLC-BG2, proving its outstanding wound-healing effect. Full article

The paper reviews the results of the authors on the production of hybrid nanosystems based on liquid crystalline (LC) long-chain cyano(alkyl and alkoxy)biphenyls (5CB, 5OCB, and 8CCB) including nanosized metal species. The samples were obtained through the direct incorporation of metal (silver and copper) atoms and small clusters into mesogenic CB matrices via a low temperature co-condensation technique, and the formation of biligand metal complexes were revealed by FTIR and ESR-spectroscopy. The heating of the systems led to the controlled growth of metal clusters and nanosized metal particles of the definite size beginning from 1 up to 200 nanometers, and their highly-ordered assemblies stabilized in the solid and liquid crystalline phases. It is shown that supramolecular ordering in different LC phases of cyanobiphenyl matrices determines the size and shape of nanosized metal species that are formed in the systems under investigation, as well as the morphology of their aggregates. TEM and atomic force microscopy (AFM) data revealed the existence of orientationally-ordered nanostructures in the nematic phases of 5CB and 5OCB. The growth of quasi-fractal 2D-aggregates was shown for layer-structured smectic mesophase of 8CB. The UV–Visible spectra of hybrid metal–mesogenic nanosystems Ag-5CB and Cu-5CB that were incorporated into polymeric films revealed intensive plasmonic bands at 400–450 nm, similar to silver nanoparticles, and 540–650 nm, similar to copper nanoparticles. The increasing of the metal contents in the samples caused the growth of highly anisometric shaped metal rods, with the ratio of the length to the diameter being more than 10 and plasmonic bands at region of λ ≥ 650 nm. Full article

The anisotropic properties of clay-rich porous media have significant impact on the directional dependence of fluids migration in environmental and engineering sciences. This anisotropy, linked to the preferential orientation of flat anisometric clay minerals particles, is studied here on the basis of the simulation of three-dimensional packings of non-interacting disks, using a sequential deposition algorithm under a gravitational field. Simulations show that the obtained porosities fall onto a single master curve when plotted against the anisotropy value. This finding is consistent with results from sedimentation experiments using polytetrafluoroethylene (PTFE) disks and subsequent extraction of particle anisotropy through X-ray microtomography. Further geometrical analyses of computed porous media highlight that both particle orientation and particle aggregation are responsible of the evolution of porosity as a function of anisotropy. Moreover, morphological analysis of the porous media using chord length measurements shows that the anisotropy of the pore and solid networks can be correlated with particle orientation. These results indicate that computed porous media, mimicking the organization of clay minerals, can be used to shed light on the anisotropic properties of fluid transfer in clay-based materials. Full article