Search Results (11)

The inversion of gravity and magnetic data can obtain the density and magnetic structure of underground space, which provide important information for resource exploration and geological structure division. The most commonly used inversion method is smooth inversion in which the objective function is built with L2-norm, which has good stability, but it produces non-focused results that make subsequent interpretation difficult. The power-type structural self-constrained inversion (PTSS) method with L2-norm is proposed to improve the resolution of smooth inversion. A self-constraint term based on the power gradient of the results is introduced, which takes advantage of the structural feature that the power gradient can better focus on the model boundary to improve the resolution. For the joint inversion of gravity and magnetic data, the power-type mutual-constrained term between different physical structures and the self-constrained term can be simultaneously used to obtain higher-resolution results. The modeling tests demonstrated that the PTSS method can produce converged high-resolution results with good noise immunity in both the respective inversions and the joint inversion. Then, the PTSS joint inversion was applied to the airborne gravity and magnetic data of the iron ore district in Shandong, revealing the shape and location of the mineralized rock mass, which are crucial information for subsequent detailed exploration. Full article

This investigation establishes an integrated method for rare earth elements (REE) exploration through a very promising and advanced exploration prospect in the Alces Lake area (SK, Canada) by assessing the integrated analysis of several multisource geophysical datasets. The resulting outcome provides important lithostructural information to the well-exposed, mineralized middle-to-lower crust at Alces Lake, comprising deep-seated poly-phase folds, ductile shear zones, and brittle faults. Geophysical–geological models of the Alces Lake property were constructed at different scales. The area of interest is located within the Beaverlodge Domain, about 28 km north of the Athabasca Basin’s northern margin. It contains some of the highest-grade rare earth elements (REE) in the world with the REE hosted predominantly in monazites within quartzo-feldspathic granitic to biotite–garnet–monazite–zircon-rich restite-bearing/cumulate mush melt pegmatites of anatectic origin (abyssal). Geophysical magnetic, gravity, and radiometric data were used together with Shuttle Radar Topography Mission (SRTM) images to facilitate the processing, modeling, and interpretation. Consequently, major structures were identified at different scales; however, the emphasis was given to studying those at the district/camp scale. The REE zones discovered to date occur within a large district-scale refolded synformal anticline. The eastern limb of this folded structure comprises a 30–40 km long, NW-trending shear zone/fault corridor with deep-seated structural crustal roots that may have served as the major pathway for ascending fluids/melts and facilitated the emplacement of mineralization. Thus, shear zones, faults, and folds in combination with lithological contacts/rheological contrasts appear to control residual/cumulate pegmatite emplacement and monazite deposition. Anomalies obtained from the airborne equivalent thorium survey data prove to be the most useful for REE pegmatite exploration. The results herein provide new interpretation and modeling perspectives leading to a better understanding of the distribution and lithostructural controls of REE on the property, and to new guidelines for future exploration programs at Alces Lake and elsewhere in northern Saskatchewan. Full article

The Princess Elizabeth Land landscape in East Antarctica was shaped by a complex process, involving the supercontinent’s breakup and convergence cycle. However, the lack of geological knowledge about the subglacial bedrock has made it challenging to understand this process. Our study aimed to investigate the structural characteristics of the subglacial bedrock in the Mount Brown region, utilizing airborne geophysical data collected from the China Antarctic Scientific Expedition in 2015–2017. We reconstructed bedrock density contrast and magnetic susceptibility models by leveraging Tikhonov regularized gravity and magnetic inversions. The deep bedrock in the inland direction exhibited different physical properties, indicating the presence of distinct basement sources. The east–west discontinuity of bedrock changed in the inland areas, suggesting the possibility of large fault structures or amalgamation belts. We also identified several normal faults in the western sedimentary basin, intersected by the southwest section of these survey lines. Furthermore, lithologic separators and sinistral strike-slip faults may exist in the northeast section, demarcating the boundary between Princess Elizabeth Land and Knox Valley. Our study provides new insights into the subglacial geological structure in this region, highlighting the violent impact of the I-A-A-S (Indo-Australo-Antarctic Suture) on the subglacial basement composition. Additionally, by identifying and describing different bedrock types, our study redefines the potential contribution of this region to the paleocontinent splicing process and East Antarctic basement remodeling. Full article

On the basis of elaborating on the regional geological background, this paper analyzes the lithological and sedimentary characteristics and explorative prospects of new strata with oil and gas in the southern and surrounding areas of Dayangshu Basin. Based on the latest high-precision airborne gravity and magnetic comprehensive survey data, combined with the latest data from geological explorations, physical surveys, and drilling, and the use of basin structure layering combination methods, we clarified the characteristics of the bottom of the Jurassic–Cretaceous and the occurrence characteristics of the Upper Paleozoic in the study area and revealed the determinative effect of multi-period structures on the most important sedimentary layers. Then, we summarized the accumulation conditions and prediction methods of hydrocarbons and proposed the oil and gas prospects of these deep new strata. The results show that the Liuhe Sag in Dayangshu Basin, the depression in the northeast of Longjiang Basin, and the northern parts of the Taikang swell have good source–reservoir–cap combination conditions and favorable structural characteristics for oil and gas, where there is a high potential for exploration. Full article

The Gamburtsev Subglacial Mountains (GSMs) in the interior East Antarctic Craton are entirely buried under the massive East Antarctic ice sheet, with a ~50–60 km thick crust and ~200 km thick lithosphere, but little is known of the crustal structure and uplift mechanism. Here, we use airborne gravity and aeromagnetic anomalies for characteristic analysis and inverse calculations. The gravity and magnetic images show three distinct geophysical domains. Based on the gravity anomalies, a dense lower crustal root is modelled to underlie the GSMs, which may have formed by underplating during the continental collision of Antarctica and India. The high frequency linear magnetic characteristics parallel to the suture zone suggest that the upper crustal architecture is dominated by thrusts, consisting of a large transpressional fault system with a trailing contractional imbricate fan. A 2D model along the seismic profile is created to investigate the crustal architecture of the GSMs with the aid of depth to magnetic source estimates. Combined with the calculated crustal geometry and physical properties and the geological background of East Antarctica, a new evolutionary model is proposed, suggesting that the GSMs are underlain by part of a Pan-African age advancing accretionary orogen superimposed on Precambrian basement. Full article

The reuse of vintage datasets which were acquired in the 20th century can pose challenges for modern geophysical modeling due to missing detailed preprocessing information, significant uncertainties, or lack of precise tracking, etc. Nevertheless, they are often the only available datasets in a target region. We explore here the potential of such vintage airborne geophysical datasets (magnetics, AEM, radiometrics) to detect the location and dip direction of geological faults, using a non-modeling interpretation approach based on multiple GIS tools. We apply our approach in a geologically well-known region where four different types of faults are mapped. The applicability of the tools used in this study depend on the geological setting of each fault and is evaluated based on the comparison with geological and—where available—with modeling data. In general, the GIS tools, especially used on a combination of datasets, show reliable results concerning the location and strike of faults, and even seem to be able to predict the dip direction of a fault. Full article

Investigation into understanding the genesis of brines in southeast Nigeria was carried out utilizing high-resolution potential field (HRPF) data. This study reveals that igneous intrusions and associated hydrothermal fluids are responsible for brine generation. The obtained result of the analytic signal revealed the locations and spatial distribution of short- and long-wavelength geologic structures associated with igneous intrusions. The low pass filtering, upward continuation, and 2D modelling procedures showed key synclinal structures which coincided well with the location of brine fields. The results showed that salt ponds are common in the neighborhood of igneous intrusions. To validate this finding, a conceptual model describing igneous-related hydrothermal circulation systems that are driven by convective cells of the hydrothermal fluid and overburden loads was generated. This model fits reasonably well into the overall stratigraphic and geologic framework of the study area. Full article

Conventional 3D magnetic inversion methods are based on the assumption that there is no remanent magnetization, and the inversion is run for magnetic susceptibility only. This approach is well-suited to targeting mineralization; however, it ignores the situation where the direction of magnetization of the rock formations is different from the direction of the induced magnetic field. We present a novel method of recovering a spatial distribution of magnetization vector within the rock formation based on joint inversion of airborne gravity gradiometry (AGG) and total magnetic intensity (TMI) data for a shared earth model. Increasing the number of inversion parameters (the scalar components of magnetization vector) results in a higher degree of non-uniqueness of the inverse problem. This increase of non-uniqueness rate can be remedied by joint inversion based on (1) Gramian constraints or (2) joint focusing stabilizers. The Gramian constraints enforce shared earth structure through a correlation of the model gradients. The joint focusing stabilizers also enforce the structural similarity and are implemented using minimum support or minimum gradient support approaches. Both novel approaches are applied to the interpretation of the airborne data collected over the Thunderbird V-Ti-Fe deposit in Ontario, Canada. By combining the complementary AGG and TMI data, we generate jointly inverted shared earth models that provide a congruent image of the rock formations hosting the mineral deposit. Full article

The Vale do Curaçá and Riacho do Pontal copper districts are located within the northern part of the Archaean São Francisco Craton and represent two pulses of mineralization. The copper districts have been identified as Iron-Oxide-Copper-Gold (IOCG) classes of deposits. An older metallogenic event associated with the Caraíba copper deposit, which is located in the Vale do Curaçá district, is related to Palaeoproterozoic (ca. 2 to 2.2 Ga) hydrothermal processes. A younger Neoproterozoic (ca. 750 to 570 Ma) episode of volcanism and associated plutonism is represented by the Riacho do Pontal mineral district. Seismic tomography data from across east-central Brazil show that the multiage Carajás province and Vale do Curaçá and Riacho do Pontal copper districts sit along either side of a prominent NW-trending upper lithospheric high-velocity zone. The edges of the high-velocity zone point to long-lived subparallel transcrustal structures that have been the focus of multiple reactivations and copper mineralization events. Regional gravity and magnetic maps show that the Vale do Curaçá copper district extends over an area greater than 110 km by 22 km. The magnetic and gravity values show significant variations correlated with this area. The district includes high gravity values associated with the Caraíba copper mine (>−35 mGal), which has a greater density (3.13 g/cm³) than the nonmineralized host rock density (2.98 g/cm³). The gravity anomaly signature over the Riacho do Pontal copper district is characterized by a 40-km long NW–SE trending Bouguer gravity low. The Ria4 occurrences of the Riacho do Pontal copper district are situated in these regional low-gravity domains. Data from regional airborne magnetic and ground gravity surveys were inverted to obtain a 3D magnetic susceptibility and density model, respectively, for the known districts. The results show that the Caraíba deposit is characterized by a both dense and magnetic source showing structural control by thrust shear zones. The 2D and 3D geological models show two main NNW prospective trends. Trends I and II have a sigmoidal shear shape and are positioned in the contact zone between domains with high magnetic susceptibility (SI > 0.005) and density > 0 g/cm³). Trend I is 40 km × 10 km in size and hosts the Caraíba, Surubim, and Vermelho copper mines and other minor deposits. The results obtained from the 3D magnetic inversion model for the region of the Riacho do Pontal district show weak magnetic anomaly highs extending along a NW–SE magnetic gradient trend. The gradient is related to mapped shear zones that overprint older and deeper NE–SW features of the São Francisco cratonic root. The area includes high gravity values associated with the Caraíba copper deposit, which has a greater density (3.13 g/cm³) than the nonmineralized host rock density (2.4 g/cm³). Full article

The Saudi Arabian Glass Earth Pilot Project is a geophysical exploration program to explore the upper crust of the Kingdom for minerals, groundwater, and geothermal resources as well as strictly academic investigations. The project began with over 8000 km² of green-field area. Airborne geophysics including electromagnetic (EM), magnetics, and gravity were used to develop several high priority targets for ground follow-up. Based on the results of airborne survey, a spectral induced polarization (SIP) survey was completed over one of the prospective targets. The field data were collected with a distributed array system, which has the potential for strong inductive coupling. This was examined in a synthetic study, and it was determined that with the geometries and conductivities in the field survey, the inductive coupling effect may be visible in the data. In this study, we also confirmed that time domain is vastly superior to frequency domain for avoiding inductive coupling, that measuring decays from 50 ms to 2 s allow discrimination of time constants from 1 ms to 5 s, and the relaxation parameter C is strongly coupled to intrinsic chargeability. We developed a method to fully include all 3D EM effects in the inversion of induced polarization (IP) data. The field SIP data were inverted using the generalized effective-medium theory of induced polarization (GEMTIP) in conjunction with an integral equation-based modeling and inversion methods. These methods can replicate all inductive coupling and EM effects, which removes one significant barrier to inversion of large bandwidth spectral IP data. The results of this inversion were interpreted and compared with results of drill hole set up in the survey area. The drill hole intersected significant mineralization which is currently being further investigated. The project can be considered a technical success, validating the methods and effective-medium inversion technique used for the project. Full article

Recent developments in large-scale geophysical inversions made it possible to invert the results of entire airborne geophysical surveys over large areas into 3D models of the subsurface. This paper presents the methods for and results of the interpretation of the data acquired by a multiphysics airborne geophysical survey in Saudi Arabia. The project involved the acquisition, processing, and interpretation of airborne electromagnetic, gravity, and magnetic geophysical data over an 8000 square kilometer area. All the collected data were carefully analyzed and inverted in 3D models of the corresponding physical properties of the subsurface, including 3D density, magnetization vector, and conductivity models. This paper summarizes the interpretation of all geophysical data sets collected during the field airborne survey. The goal of the paper is to demonstrate how the advanced 3D modeling and inversion methods can be effectively used for interpretation of multiphysics airborne survey data and to study and analyze the potential of the survey area for natural resource exploration in Saudi Arabia. Full article