Search Results (5)

Integrated photonics is a transformative technology for enhancing communication and computation in Cloud and Fog computing networks. Photonic integrated circuits (PICs) enable significant improvements in data-processing speed, energy-efficiency, scalability, and latency. In Cloud infrastructures, PICs support high-speed optical interconnects, energy-efficient switching, and compact wavelength division multiplexing (WDM), addressing growing data demands. Fog computing, with its edge-focused processing and analytics, benefits from the compactness and low latency of integrated photonics for real-time signal processing, sensing, and secure data transmission near IoT devices. PICs also facilitate the low-loss, high-speed modulation, transmission, and detection of RF signals in scalable Radio-over-Fiber (RoF) links, enabling seamless IoT integration with Cloud and Fog networks. This results in centralized processing, reduced latency, and efficient bandwidth use across distributed infrastructures. Overall, integrating photonic technologies into RoF, Fog and Cloud computing networks paves the way for ultra-efficient, flexible, and scalable next-generation network architectures capable of supporting diverse real-time and high-bandwidth applications. This paper provides a comprehensive review of the current state and emerging trends in integrated photonics for IoT sensors, RoF, Fog and Cloud computing systems. It also outlines open research opportunities in photonic devices and system-level integration, aimed at advancing performance, energy-efficiency, and scalability in next-generation distributed computing networks. Full article

Managing the users multimedia and long-range based demands, the radio over fiber (RoF) mechanism has been introduced recently. RoF mingles the optical and radio communication frameworks to increase mobility and offer high capacity communication networks (CNs). In this paper, a full-duplex RoF-based CN is investigated for the next-generation passive optical network (PON), utilizing wavelength division multiplexing (WDM) technology. The desolations on account of optical and electronic domains (OEDs) are addressed, using dispersion compensation fiber (DCF) and optical and electrical filters, including modulation scheme. The analytical and simulation models are analyzed in terms of phase error (PE), radio frequency (RF), fiber length and input and received powers. The performance of the proposed model is successfully evaluated for 50 km range, −40 to −18 dBm received power, −20 to 0 dBm input power, where below ${10}^{-6}$ bit error rate (BER) is recorded. Thus, this signifies that the presented model exhibits smooth execution against OEDs impairments. Full article

Radio-over-fiber (RoF) links successfully provide high data rates and bandwidth capacity with a low complexity system architecture, as compared to its counterpart digital-RoF. In addition, the compound of quadrature amplitude modulation (QAM) and orthogonal frequency division multiplexed (OFDM) modulation schemes further enhance the process of these achievements. However, high data rates and bandwidth-capacity-supported RoF links face nonlinearities (NLs), linear distortions (LDs), and phase noise challenges that degrade the reliability of communication networks (CNs). Therefore, in this paper, to suppress NLs, LDs, and phase noise, next generation cloud radio access networks (CRANs) are investigated using RoF links and wavelength division multiplexing (WDM) methodology based on 16, 32, and 64 QAM-OFDM modulation schemes. The receiver of the proposed framework is designed, applying an improved digital signal processing (DSP) system that includes overlap frequency domain equalization (OFDE), a synchronization process, and time domain equalization (TDE). Theoretical and simulation models are organized for estimating the proposed RoF link with the aid of different values of transmission ranges, input power, output power, bit rate, bits per symbol, channel spacing, and the number of users. The fitness of the model matches that of existing approaches. Full article

Next-generation cloud radio access networks (C-RANs) are anticipated to provide multi-Gbps data rate transmission and ultra-high bandwidth capacity, which is one of the key performance indicators for future mobile networks. The integral layout of fiber optics and radio network manages the capabilities of the C-RAN, but needs to be optimized in terms of cost, reliability and further scalibility. For C-RAN architectures, Radio over Fiber (RoF) transport-based fronthaul is a promising candidate but the associated issues of distortions due to nonlinear impairments (NLIs) from power amplifier, linear distortions (LDs) due to modulating lasers and high peak to average power ratio (PAPR) of orthogonal frequency division multiplexing (OFDM) signals need to be addressed. This work investigates these performance limiting factors and presents a DSP receiver-based solution to mitigate the effects of NLIs, LDs and high PAPR. Simulations are performed by applying a various range of transmission input powers, different quadrature amplitude modulation (QAM) formats for the OFDM signal, optimized filtering at the receiver end and varying channel spacing among the optical WDM channels to analyze the performance of the proposed receiver under different conditions. The simulations and theoretical model of the proposed case studies verify that the presented solution for the RoF transport utilize less power, performs better for longer transmission distances, supports higher modulation formats and transports large number of WDM channels in the presence of NLIs and DLs as compared to the conventional RoF approach. With compensation of NLIs and LDs, transmission distance up to 10 km is investigated using 16 WDM channels with aggregate data rate of 100 Gb/s which shows that the proposed receiver can be used for future C-RAN fronthaul networks. Full article

The integration of optical and wireless networks increases mobility and capacity and decreases costs in access networks. Fibre optic communication can be considered optical communication that combines the methodologies of two communications, and it may be utilised in systems of wired and wireless communication. The solution for many problems is radio over fibre (RoF) because it can control many base stations (BS) that are connected to a central station (CS) with an optical fibre. The received RoF signal head for in a low quality; thus, many factors will result in some problems such as a high bit error rate (BER) and low Q-factor values, and the receiver might not be operating in a high data rate network. Wavelength division multiplexing (WDM) network can offer a solution to these problems where the transmission of different signals can be done with a single-mode fibre. BER should be reduced to assured values, and the Q-factor must be increased. The investigation of WDM-RoF with different lengths of fibre at various channel spacing will be simulated using Optisystem software, and the RoF’s receiver performance is measured and analyzed depending on the acquired BER, the value of the Q-factor, and the height of the opening of the eye diagram. The degradation factors effect such as attenuation and dispersion are significantly limited with the addition of an EDFA amplifier to a Single Mode Fibre (SMF). Full article