Search Results (6)

Fault location technology is crucial for enhancing the efficiency of fault maintenance and ensuring the safety of the power supply in small current grounding systems. To address the challenge that traditional single-end positioning methods experience when identifying the reflected wave head and that the adaptability of wave head calibration methods is typically limited, a single-end location method of modulus wave velocity differences based on marine predator algorithm optimized multivariate variational mode decomposition (MVMD) and morphological gradient is proposed. Firstly, the minimum comprehensive entropy kurtosis ratio is used as the fitness function, and the marine predator algorithm is used to realize the automatic optimization of the mode number and penalty factor of the multivariate variational mode decomposition. Therefore, with the goal of decomposing the traveling wave characteristic signals with the most significant traveling wave characteristic information and the lowest noise component, the line-mode traveling wave and the zero-mode traveling wave are accurately decomposed. Secondly, the intrinsic mode function component with the smallest entropy kurtosis ratio is selected as the line-mode traveling wave characteristic signal and the zero-mode traveling wave characteristic signal, respectively, and the arrival time of the wave head is accurately calibrated by combining the morphological gradient value. Finally, the fault distance is calculated by the modulus wave velocity difference location formula and compared with the variational mode decomposition-Teager energy operator (VMD-TEO) method and the empirical mode decomposition _first-order difference method. The results show that the proposed method has the highest accuracy of positioning results, and the algorithm time is significantly reduced compared with the VMD-TEO method, and it has strong adaptability to different line types of faults, different fault initial conditions, and noise interference. Full article

Since the rolling bearing fault signal captured by a vibration sensor contains a large amount of background noise, fault features cannot be accurately extracted. To address this problem, a rolling bearing fault feature extraction algorithm based on improved pelican optimization algorithm (IPOA)–variable modal decomposition (VMD) and multipoint optimal minimum entropy deconvolution adjustment (MOMEDA) methods is proposed. Firstly, the pelican optimization algorithm (POA) was improved using a reverse learning strategy for dimensional-by-dimensional lens imaging and circle mapping, and the optimization performance of IPOA was verified. Secondly, the kurtosis-square envelope Gini coefficient criterion was used to select the optimal modal components from the decomposed components of the signal, and MOMEDA was used to process the optimal modal components in order to obtain the optimal deconvolution signal. Finally, the Teager energy operator (TEO) was employed to demodulate and analyze the optimally deconvoluted signal in order to enhance the transient shock component of the original fault signal. The effectiveness of the proposed method was verified using simulated and actual signals. The results showed that the proposed method can accurately extract failure characteristics in the presence of strong background noise interference. Full article

High voltage direct current (HVDC) transmission systems play an increasingly important role in long-distance power transmission. Realizing accurate and timely fault location of transmission lines is extremely important for the safe operation of power systems. With the development of modern data acquisition and deep learning technology, deep learning methods have the feasibility of engineering application in fault location. The traditional single-terminal traveling wave method is used for fault location in HVDC systems. However, many challenges exist when a high impedance fault occurs including high sampling frequency dependence and difficulty to determine wave velocity and identify wave heads. In order to resolve these problems, this work proposed a deep hybrid convolutional neural network (CNN) and long short-term memory (LSTM) network model for single-terminal fault location of an HVDC system containing mixed cables and overhead line segments. Simultaneously, a variational mode decomposition–Teager energy operator is used in feature engineering to improve the effect of model training. 2D-CNN was employed as a classifier to identify fault segments, and LSTM as a regressor integrated the fault segment information of the classifier to achieve precise fault location. The experimental results demonstrate that the proposed method has high accuracy of fault location, with the effects of fault types, noise, sampling frequency, and different HVDC topologies in consideration. Full article

This paper proposes an approach to the determination of the precise location of an impact on the surface of a wind turbine blade (WTB) based on a fiber Bragg grating (FBG) and the time difference, and its effectiveness is verified by experiments. First, the strain on the WTB surface is detected with an FBG. Then, the signal is decomposed into a series of components via variational mode decomposition (VMD), and some signals with impact characteristics are chosen for reconstruction. The instant energy of the reconstructed signal is then amplified through the Teager energy operator (TEO) to identify the time difference between FBGs. Finally, the coordinate of the impact point is obtained by solving the hyperbolic mode with the time difference. The results of experiments demonstrate that the proposed approach exhibits good performance with high accuracy (97%) and low error (12.3 mm). Full article

Variational mode decomposition (VMD) with a non-recursive and narrow-band filtering nature is a promising time-frequency analysis tool, which can deal effectively with a non-stationary and complicated compound signal. Nevertheless, the factitious parameter setting in VMD is closely related to its decomposability. Moreover, VMD has a certain endpoint effect phenomenon. Hence, to overcome these drawbacks, this paper presents a novel time-frequency analysis algorithm termed as improved adaptive variational mode decomposition (IAVMD) for rotor fault diagnosis. First, a waveform matching extension is employed to preprocess the left and right boundaries of the raw compound signal instead of mirroring the extreme extension. Then, a grey wolf optimization (GWO) algorithm is employed to determine the inside parameters ( $\widehat{\alpha }$ , K) of VMD, where the minimization of the mean of weighted sparseness kurtosis (WSK) is regarded as the optimized target. Meanwhile, VMD with the optimized parameters is used to decompose the preprocessed signal into several mono-component signals. Finally, a Teager energy operator (TEO) with a favorable demodulation performance is conducted to efficiently estimate the instantaneous characteristics of each mono-component signal, which is aimed at obtaining the ultimate time-frequency representation (TFR). The efficacy of the presented approach is verified by applying the simulated data and experimental rotor vibration data. The results indicate that our approach can provide a precise diagnosis result, and it exhibits the patterns of time-varying frequency more explicitly than some existing congeneric methods do (e.g., local mean decomposition (LMD), empirical mode decomposition (EMD) and wavelet transform (WT) ). Full article

The identification and localization of a fault are a basic requirement for optimal operation of a modern power system. An effective fault identification method significantly reduces outage time, improves the electrical supply reliability, and enhances the speed of protection control. This paper proposes a novel method based on the theory of the two-terminal traveling wave range to identify the fault location in a voltage source converter based high voltage direct current (VSC-HVDC) system containing mixed cable and overhead line segments. It uses variational mode decomposition (VMD) and the Teager energy operator (TEO) as a new method to detect the traveling wave fault through a fault signal. The effectiveness of the proposed method is verified via time domain simulation of the hybrid VSC-HVDC transmission system using PSCAD/EMTDC and MATLAB software. Simulation results show that the proposed method demonstrates high fault location accuracy and excellent robustness with a slight effect on transient resistance and fault types, and that it performs better than the existing transient detection techniques, such as wavelet transform and ensemble empirical mode decomposition. Full article