Search Results (3)

Composite materials have gained prominence in aerospace engineering due to their high strength-to-weight and stiffness-to-weight ratios. However, their susceptibility to interlaminar damage, particularly delamination, remains a significant concern, especially under compressive loads. This study presents a detailed numerical investigation into the buckling behavior and delamination propagation in flat and curved composite panels with centrally located circular delaminations. Four configurations were analyzed, differing by geometry (flat vs. curved) and delamination interface. The critical buckling load was first estimated through linear eigenvalue analysis, while post-buckling behavior and damage progression were studied using a nonlinear static analysis enhanced by the Smart-time XB (SMXB) tool. Numerical results, including out-of-plane displacements and delamination length evolution, were validated against experimental data from the literature. The findings confirm the accuracy of the adopted FEM approach and highlight the beneficial role of curvature in increasing buckling resistance and improving damage tolerance, offering valuable insights for the design of aerospace composite structures. Full article

The instability of structures due to compression is one of the most critical issues related to aircraft components. Especially in composite materials, which have poor out-of-plane mechanical properties, the buckling load must be assessed to ensure that the structures are within the safe limits compared to the operating loads. In the presence of delamination, the compression instability of structures becomes catastrophic, as the propagation of delamination can dramatically reduce the stiffness of the structure almost instantaneously. During the operational life of composite aircraft components, one of the most common events that can occur is low-velocity impact with foreign objects, which is one of the primary reasons for delamination. In this paper, a sensitivity analysis is presented on a typical aerospace reinforced panel with a circular delamination, representative of an impact damage. Different configurations have been analysed, varying the radius and position along the thickness of the delamination. Furthermore, some geometric parameters of the panel have been modified to evaluate how the buckling load and the propagation of interlaminar damage evolve. Full article

Increasing the Mode I inter-laminar fracture toughness of composite laminates can contribute to slowing down delamination growth phenomena, which can be considered one of the most critical damage mechanisms in composite structures. Actually, the Mode I interlaminar fracture toughness (G_Ic) in fibre-reinforced composite materials has been found to considerably increase with the crack length when the fibre bridging phenomenon takes place. Hence, in this paper, the fibre bridging phenomenon has been considered as a natural toughening mechanism able to replace embedded metallic or composite reinforcements, currently used to increase tolerance to inter-laminar damage. An experimental/numerical study on the influence of delamination growth on the compressive behaviour of fibre-reinforced composites characterised by high sensitivity to the fibre bridging phenomenon has been performed. Coupons, made of material systems characterised by a variable toughness related to a high sensitivity to the fibre bridging phenomenon and containing artificial through-the-width delaminations, were subjected to a compressive mechanical test and compared to coupons made of standard material system with constant toughness. Out-of-plane displacements and strains were monitored during the compression test by means of strain gauges and digital image correlation to assess the influence of fibre bridging on delamination buckling, delamination growth and on the global buckling of the specimens, including buckling shape changes. Experimental data were combined with a numerical study, performed by means of a virtual crack closure technique based procedure, named SMart Time XB – Fibre Bridging (SMXB-FB), able to mimic the crack bridging effect on the toughness properties of the material system. The combination of numerical results and experimental data has allowed the deformations and the buckling shape changes to be correlated to the onset and evolution of damage and, hence, contributes to improving the knowledge on the interaction of the failure mechanisms in the investigated composite specimens. Full article