Search Results (5)

Thermodynamic simulations of fluid–rock interactions provide valuable insights into mineral deposit formation mechanisms. This study investigates the Pulang porphyry Cu-Au deposit in the Sanjiang Tethys Orogen, employing both Gibbs energy minimization (GEM) and the Law of mass action (LMA) method to understand alteration overprinting and metal precipitation. The modeling results suggest that the ore-forming fluid related to potassic alteration was initially oxidized (ΔFMQ = +3.54~+3.26) with a near-neutral pH (pH = 5.0~7.0). Continued fluid–rock interactions, combined with the input of reduced groundwater, resulted in a decrease in both pH (4.8~6.1) and redox potential (ΔFMQ~+1), leading to the precipitation of propylitic alteration minerals and pyrrhotite. As temperature further decreased, fluids associated with phyllic alteration showed a slight increase in pH (5.8~6.0) and redox potential (ΔFMQ = +2). The intense superposition of propylitic and phyllic alteration on the potassic alteration zone is attributed to the rapid temperature decline in the magmatic–hydrothermal system, triggering fluid collapse and reflux. Mo, mainly transported as HMoO₄⁻ and MoO₄⁻², precipitated in the high-temperature range; Cu, carried primarily by CuCl complexes (CuCl₄⁻³, CuCl₂⁻, CuCl), precipitated over intermediate to high temperatures; and Au, transported as Au-S complexes (Au(HS)₂⁻, AuHS), precipitated from intermediate to low temperatures. This study demonstrates that fluid–rock interactions alone can account for the observed sequence of alteration and mineralization in porphyry systems. Full article

The Yidun island arc was formed in response to the Late Triassic westward subduction of the Ganzi–Litang oceanic plate, a branch of the Paleo-Tethys Ocean. The Zhongdian arc, located in the south of the Yidun island arc, has relatively large number of porphyry (skarn) type Cu–Mo ± Au polymetallic deposits, the largest of which is the Pulang Cu (–Mo–Au) deposit with proven Cu reserves of 5.11 Mt, Au reserves of 113 t, and 0.17 Mt of molybdenum. However, the relationship between mineralization and the potassic alteration zone, phyllic zone, and propylitic zone of the Pulang porphyry deposit is still controversial and needs further study. Titanite (CaTiSiO₅) is a common accessory mineral in acidic, intermediate, and alkaline igneous rocks. It is widely developed in various types of metamorphic rocks, hydrothermally altered rocks, and a few sedimentary rocks. It is a dominant Mo-bearing phase in igneous rocks and contains abundant rare earth elements and high-field-strength elements. As an effective geochronometer, thermobarometer, oxybarometer, and metallogenic potential indicator mineral, titanite is ideal to reveal the magmatic–hydrothermal evolution and the mechanism of metal enrichment and precipitation. In this paper, major and trace element contents of the titanite grains from different alteration zones were obtained using electron probe microanalysis (EPMA) and laser-ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) to define the changes in physicochemical conditions and the behavior of these elements during the process of hydrothermal alteration at Pulang. Titanite in the potassic alteration zone is usually shaped like an envelope. It occurs discretely or is enclosed by feldspar, with lower contents of CaO, Al, Sr, Zr and Hf; a low Nb/Ta ratio; high ∑REE + Y, U, Th, Ta, Nb, and Ga content; and high FeO/Al₂O₃ and LREE/HREE ratios. This is consistent with the characteristics of magmatic titanite from fresh quartz monzonite porphyry in Pulang and other porphyry Cu deposits. Titanite in the potassium silicate alteration zone has more negative Eu anomaly and a higher U content and Th/U ratio, indicating that the oxygen fugacity decreased during the transformation to phyllic alteration and propylitic alteration in Pulang. High oxygen fugacity is favorable for the enrichment of copper, gold, and other metallogenic elements. Therefore, the enrichment of copper is more closely related to the potassium silicate alteration. The molybdenum content of titanite in the potassium silicate alteration zone is 10²–10⁴ times that of the phyllic alteration zone and propylitic alteration zone, while the copper content is indistinctive, indicating that molybdenum was dissolved into the fluid or deposited in the form of sulfide before the medium- to low-temperature hydrothermal alteration, which may lead to the further separation and deposition of copper and molybdenum. Full article

The Pulang super-large porphyry Cu polymetallic deposit, located in the Sanjiang area of Yunnan Province, is one of the largest Cu deposits in China. This deposit hosts Cu resources of ~5 × 10⁶ t and other ore-forming elements, such as Mo, Au, Ag, Pb, Zn, Pt and Pd. Recently, obvious hydrothermal vein-type Pb–Zn mineralization, with a Pb + Zn resource of ~0.4 × 10⁶ t, has been detected in the North Ore Section of the deposit. However, the genesis of these Pb–Zn ore bodies, especially their relationship to the major Cu ore bodies in the South Ore Section, remains controversial. We conducted geologic description, fluid inclusion petrography and microthermometry, and C, H, O and S isotope studies to uncover the genesis of Pb–Zn vein-type mineralization in North Pulang. As a result, three types of Pb–Zn veins were identified: a quartz–pyrrhotite–chalcopyrite–sphalerite–galena vein, a quartz–pyrrhotite–sphalerite–galena vein, and a calcite–quartz–pyrrhotite–galena vein. All fluid inclusions in the quartz from different veins are liquid-rich inclusions, with homogenization temperatures in the range of 184 °C–235 °C and salinities between 10.4 wt.% and 17.8 wt.% NaCl eq., indicating that the Pb–Zn ore-forming fluid was a single-phase fluid with a low temperature and low-to-medium salinity. Hydrothermal quartz in different stages displays δD_water values ranging from −46.9‰ to −120.0‰ (V-SMOW), and the calculated δ¹⁸O_water values range from 2.4‰ to 4.3‰ (V-SMOW), implying that the mineralization fluids likely originated from magma, with a minor involvement of meteoric water. The δ¹³C_Cal values (−2.3‰ to −7.9‰ V-PDB) of calcite indicate that C likely originated from a deep-seated source. The δ³⁴S values of chalcopyrite, pyrite, pyrrhotite and sphalerite reveal that S was possibly derived from magmatic rocks. Based on the above data, it is suggested that the Pb–Zn mineralization in North Pulang was the result of the northward migration of ore-forming fluids that originated from South Pulang along the NE-trending structural fractures. A strong water–rock interaction occurred during the migration process. However, the involvement of meteoric water and accompanied cooling of fluids were most likely responsible for the precipitation of galena and sphalerite. Full article

The Pulang copper deposit, formed in the Late Triassic, is the largest porphyry Cu-Mo-Au deposit in the eastern Tethys, and its genetic type and mineralization potential have received widespread attention. Identifying the characteristics of ore-forming fluids and the sources of ore-forming materials in the deep and peripheral ore bodies of Pulang is particularly important for constructing a complete porphyry copper mineralization system. Based on detailed core logging and geological observations, this article provides extensive petrographic, fluid inclusion micro-thermometry, laser Raman spectroscopy, and H-O-S isotope data on the veins of the main mineralization stage (B veins) in the first mining area and eastern ore section of the Pulang porphyry copper deposit. The genetic correlation between the eastern ore section and the first mining area is clarified, and their mineralization potential is inferred. The results indicate that the deep vein bodies in the first mining area exhibit multi-stage characteristics, and the fluid in B veins exhibits both high-temperature and salinity characteristics. The magma-derived early ore-forming fluids underwent processes such as boiling and experienced immiscibility during meteoric water mixing, which could be the primary mechanism of the precipitation of Cu, Mo, Au, and other metals. The outer eastern ore section is located in a medium-to-low-temperature hydrothermal mineralization zone far from the mineralization center. This outer eastern ore section is a distant part of the magmatic–hydrothermal system of the first mining area. Full article

The giant Pulang porphyry Cu (–Mo–Au) deposit in Northwestern Yunnan Province, China, is located in the southern part of the Triassic Yidun Arc. The Cu orebodies are mainly hosted in quartz monzonite porphyry (QMP) intruding quartz diorite porphyry (QDP) and cut by granodiorite porphyry (GP). New LA-ICP-MS zircon U–Pb ages indicate that QDP (227 ± 2 Ma), QMP (218 ± 1 Ma, 219 ± 1 Ma), and GP (209 ± 1 Ma) are significantly different in age; however, the molybdenite Re–Os isochron age (218 ± 2 Ma) indicates a close temporal and genetic relationship between Cu mineralization and QMP. Pulang porphyry intrusions are enriched in light rare-earth elements (LREEs) and large ion lithophile elements (LILEs), and depleted in heavy rare-earth elements (HREEs) and high field-strength elements (HFSEs), with moderately negative Eu anomalies. They are high in SiO₂, Al₂O₃, Sr, Na₂O/K₂O, Mg#, and Sr/Y, but low in Y, and Yb, suggesting a geochemical affinity to high-silica (HSA) adakitic rocks. These features are used to infer that the Pulang HSA porphyry intrusions were derived from the partial melting of a basaltic oceanic-slab. These magmas reacted with peridotite during their ascent through the mantle wedge. This is interpreted to indicate that the Pulang Cu deposit and associated magmatism can be linked to the synchronous westward subduction of the Ganzi–Litang oceanic lithosphere, which has been established as Late Triassic. Full article