Search Results (27)

Most forest harvesting operations are performed using two or more forestry machines in combination; in the typical forest production system in steep terrain in Japan, there are four production processes: felling, yarding, processing, and forwarding. It is essential to evaluate the overall productivity of such combined production systems, but the calculation method that indicates the productivity has not been fully established. In this study, we built simulation models of serial, parallel, and sequential production systems by using system dynamics to evaluate their productivity regarding the combined machine productivity (CMP) and combined labor productivity (CLP) indices. Comparing the three types of forest harvesting systems in Japan, the parallel production system had the highest CMP, while the serial production system had the highest CLP; the sequential production system lay between the serial and parallel production systems in terms of CMP and CLP. The overall productivity of Japanese forest production systems was lower than that of Central Europe, where processor tower yarders (PTYs) are used. Thus, the CLP of Japanese forest production systems was improved by 12.8 to 26.5% by incorporating the concept of a PTY, and it can be further improved by eliminating the forwarding process. Full article

Physiological workload in daily forestry work is measured using heart rate (HR), but its standard method has not yet been established. This scoping review aimed to explore how HR had been measured in forestry fields and reported. Five databases and three Japanese journals were searched to find published journal articles reporting HR during the daily shift in silviculture and harvest operations as eligibility criteria. Working HR, resting HR, HR index, and HR reserve percentage (%HRR) were extracted, and working conditions and measurement methods were also collected. The tasks were classified into silviculture, harvest, and machine operations. HR variables were examined in terms of operations and their relationships with resting HR. Out of 232 articles searched, 22 were eligible. Only two studies reported all the items of working conditions and measurement methods. Furthermore, 17 studies, which included 371 participants and assessed 22 tasks, reported resting HR. Working HR, HR index, and %HRR showed significant differences among the operations (p < 0.001, p = 0.007, and p = 0.03, respectively). The HR index and %HRR negatively correlated with resting HR (r = −0.620 and −0.411, respectively). The working conditions and the measurement methods of HR, especially resting HR, have not been comprehensively reported, thereby possibly influencing the reported workload. This insufficiency should be addressed before future research. Full article

Individual tree parameters are essential for forestry decision-making, supporting economic valuation, harvesting, and silvicultural operations. While extensive research exists on uniform and simply structured forests, studies addressing complex, dense, and mixed forests with highly overlapping, clustered, and multiple tree crowns remain limited. This study bridges this gap by combining structural, textural, and spectral metrics derived from unmanned aerial vehicle (UAV) Red–Green–Blue (RGB) and multispectral (MS) imagery to estimate individual tree parameters using a random forest regression model in a complex mixed conifer–broadleaf forest. Data from 255 individual trees (115 conifers, 67 Japanese oak, and 73 other broadleaf species (OBL)) were analyzed. High-resolution UAV orthomosaic enabled effective tree crown delineation and canopy height models. Combining structural, textural, and spectral metrics improved the accuracy of tree height, diameter at breast height, stem volume, basal area, and carbon stock estimates. Conifers showed high accuracy (R² = 0.70–0.89) for all individual parameters, with a high estimate of tree height (R² = 0.89, RMSE = 0.85 m). The accuracy of oak (R² = 0.11–0.49) and OBL (R² = 0.38–0.57) was improved, with OBL species achieving relatively high accuracy for basal area (R² = 0.57, RMSE = 0.08 m² tree⁻¹) and volume (R² = 0.51, RMSE = 0.27 m³ tree⁻¹). These findings highlight the potential of UAV metrics in accurately estimating individual tree parameters in a complex mixed conifer–broadleaf forest. Full article

This study investigates the Fukugi (Garcinia subelliptica) windbreak landscapes on Iriomote Island through case studies in two of its oldest villages, Sonai and Hoshitate. These windbreak forests, integral to the cultural landscape of Okinawa, offer both ecological and socio-economic benefits. Using field measurements and surveys, the research analyzes the distribution, growth patterns, and historical significance of Fukugi groves within the village setting and compares naturally regenerated forests with those planted by humans. The findings underscore the importance of Fukugi trees in promoting sustainable rural landscapes, where they dominate the local ecosystem of rural settlements. Fukugi windbreak landscapes in Okinawa are characterized by trees encircling homes on all four sides, distinguishing them from homestead windbreaks found in other regions of Japan. Surveys from the two villages suggest that the original homestead windbreak forests in the Yaeyama region contain a diverse mix of tree species, with Fukugi and Calophyllum inophyllum being predominant, along with other useful species like Diospyros ferrea and Podocarpus macrophyllus. These species were selected not only for their windbreak capabilities but also for timber and home furniture production. The study’s findings on naturally regenerated Fukugi groups support the hypothesis that the cultivation of Fukugi as a windbreak species originated in the Yaeyama region and likely spread to other parts of Okinawa, influencing both the ecological and cultural evolution of the region’s landscapes. Full article

The year 2023 marks the 12th anniversary of the Great East Japan Earthquake (GEJE). Immediately after the disaster, the number of evacuees reached approximately 470,000, but by November 2022, the number had decreased to approximately 31,000. The reconstruction of housing, disposal of debris, public infrastructure development, and overall restoration and reconstruction has progressed steadily. However, a re-examination of the status of industrial restoration and reconstruction reveals that restoration and reconstruction have not progressed in some areas. This research statistically analyzes how the Japanese public perceives the issues around the recovery process and what memories and records they would like to learn from regarding the GEJE. The purpose of this study is to ask about reconstruction issues and lessons learned from the GEJE by conducting a web-based survey with 2000 respondents in Japan. The method of estimation is the use of ordinal logistic regression analysis to statistically estimate whether there are differences in recovery issues and lessons learned depending on individual attributes. The results suggest that those who are interested in, remember, and express anxiety about the recovery issues and lessons learned tend to be men, do not have children, are highly educated, and have a higher income. In sum, many of Japan’s citizens are highly interested in the reconstruction of agriculture, forestry, fisheries, housing, urban development, living environment, industry, and livelihood in the affected areas. In the future, they will play a central role in modernizing, scaling up, and integrating the agriculture, forestry, and fisheries industries, as well as in rebuilding towns and livelihoods. In the affected areas, it will be necessary to draw on the lessons learned from the GEJE and create reconstruction plans for the future, and then, policymakers will need to formulate reconstruction policies that reflect the concerns of the Japanese people. Full article

The Japanese pine sawyer Monochamus alternatus serves as the primary vector for pine wilt disease, a devastating pine disease that poses a significant threat to the sustainable development of forestry in the Eurasian region. Currently, trap devices based on informational compounds have played a crucial role in monitoring and controlling the M. alternatus population. However, the specific proteins within M. alternatus involved in recognizing the aforementioned informational compounds remain largely unclear. To elucidate the spatiotemporal distribution of M. alternatus chemosensory-related genes, this study conducted neural transcriptome analyses to investigate gene expression patterns in different body parts during the feeding and mating stages of both male and female beetles. The results revealed that 15 genes in the gustatory receptor (GR) gene family exhibited high expression in the mouthparts, most genes in the odorant binding protein (OBP) gene family exhibited high expression across all body parts, 22 genes in the odorant receptor (OR) gene family exhibited high expression in the antennae, a significant number of genes in the chemosensory protein (CSP) and sensory neuron membrane protein (SNMP) gene families exhibited high expression in both the mouthparts and antennae, and 30 genes in the ionotropic receptors (IR) gene family were expressed in the antennae. Through co-expression analyses, it was observed that 34 genes in the IR gene family were co-expressed across the four developmental stages. The Antenna IR subfamily and IR8a/Ir25a subfamily exhibited relatively high expression levels in the antennae, while the Kainate subfamily, NMDA subfamily, and Divergent subfamily exhibited predominantly high expression in the facial region. MalIR33 is expressed only during the feeding stage of M. alternatus, the MalIR37 gene exhibits specific expression in male beetles, the MalIR34 gene exhibits specific expression during the feeding stage in male beetles, the MalIR8 and MalIR39 genes exhibit specific expression during the feeding stage in female beetles, and MalIR8 is expressed only during two developmental stages in male beetles and during the mating stage in female beetles. The IR gene family exhibits gene-specific expression in different spatiotemporal contexts, laying the foundation for the subsequent selection of functional genes and facilitating the full utilization of host plant volatiles and insect sex pheromones, thereby enabling the development of more efficient attractants. Full article

The yield of Eucalyptus regnans logs for lumber production was evaluated. Crack width and length at each log end were measured. Two log-cutting plans were used to obtain sawn lumber. The first plan (PA) considered logs with diameters varying from 28 to 40 cm, and in the second plan (PB), the log diameters ranged from 42 to 56 cm (PB). Lumber yield was determined using two log volume methods: the Japanese Agricultural Standards (JAS) and Smalian’s equation. The deformations of E. regnans lumber were measured. The Australian and Chilean standards were used to classify sawn lumber. The results showed that logs had radial cracks at both log ends. Cracks were classified into two groups, considering the crack length. Regarding the lumber deformations, most boards exhibited level B bows and crooks in both cutting plans. Levels A and B twists were prevalent in PA, whereas in PB, level A significantly outnumbered level B. The lumber yield of E. regnans in PB was higher than in PA. The lumber yield determined by Smalian’s equation was higher than that determined by the JAS method. This research provides insight into the characterization of E. regnans for lumber production, highlighting its relevance in the forestry industry. Full article

Forests provide diverse ecosystem services to people. Consequently, initiatives have been undertaken to restore deforested areas. In East Asian countries, particularly those within the Asian Monsoon region, deforestation has contributed to natural disasters such as sediment run-off, landslides, and flooding, which are exacerbated by torrential rainfall. Restoring forest cover is a critical aspect of national land conservation. To achieve this goal, state-led afforestation initiatives have been launched. Successful afforestation efforts have also been considered an indicator of economic development. However, Japan, which implemented afforestation projects successfully in the 1950s and 1970s, has experienced the under-utilization of its forests due to significant changes in economic and societal conditions since afforestation took place. During the 2010s, the Japanese government promoted the industrialization of forestry, encouraging final felling and reforestation. However, there have been issues with immature forest operation methods and low forestry productivity. Furthermore, in the context of intensifying climate change, heavy rainfall-induced disasters have become more intense, with an increased threat to human safety. Research efforts from the natural and social science fields in Japan have helped identify issues that need to be addressed concerning forests where plantation trees are now utilizable. There is a need to identify improved methods of forestry practice that reduce the risk of climate change-related disasters and establish related forest policies. Full article

Forestry workers endure highly physical workloads. Japanese forestry workers experience additional up-and-down movements due to geographical features. Fatigue is a common cause of injury. This pilot study aimed to determine an appropriate method for estimating energy expenditure while moving across inclined ground to simulate a Japanese forest. Six participants wore a portable indirect calorimeter ($\dot{\mathrm{V}}$O₂), heart rate (HR) monitor (17 g), accelerometer (20 g; vector magnitude; VM), and a global navigation satellite system (GNSS) device. They walked shouldering 20 kg of weight on flat, 15°- and 30°-slopes. The time course of HR was similar to that of $\dot{\mathrm{V}}$O₂, but that of VM and the vertical movement varied from that of $\dot{\mathrm{V}}$O₂. GNSS cannot correctly detect vertical movements. The HR index (HRI), indicating the ratio of activity HR to resting HR, was significantly correlated with the metabolic equivalent of the task (MET) calculated from $\dot{\mathrm{V}}$O₂ (r = 0.932, p < 0.0001), which fit the previously proposed formula for METs (METs = HRI × 6 − 5). However, VM was not correlated with VM (r = 0.354, p = 0.150). We can use HRI to measure the workload of Japanese forestry workers with a small burden in the field. Full article

This paper aimed to clarify the association of mid-adolescent dietary practices and experiences with adult eating behavior and attitudes using individual data from the “Survey of Attitudes toward Shokuiku (food and nutrition education), 2019” put forth by the Ministry of Agriculture, Forestry and Fisheries of Japan. We applied conditional mixed-process models to estimate the parameters simultaneously, and used them to predict current eating consciousness, current eating behaviors in a balanced diet, dietary behavior, and attitudes toward preventing or improving lifestyle-related diseases as dependent variables. As a result, compared to those who did not have good dietary practices and experiences in mid-adolescence, participants who had good dietary practices and experiences in the same period displayed greater interest in practicing a healthier diet. These participants frequently consumed a combination of staple foods, main dishes, and side dishes, and were more concerned about preventing or improving lifestyle-related diseases. In conclusion, mid-adolescent dietary practices and experiences had a lasting influence on adult eating behaviors and attitudes in Japanese participants. Full article

Japanese larch (Larix kaempferi), a non-native tree species, has been widely planted in the Qinling Mountains since the last century, but it does not meet the habitat needs of giant pandas (Ailuropoda melanoleuca), mainly because of food, further causing habitat degradation and fragmentation. However, how soil microorganisms, considered as predictors of the soil environment, respond to Japanese larch remains poorly explored, especially compared with native forests. Here, we collected 40 soil samples from plantation, bamboo, and natural (excluding bamboo) forests in the Changqing Nature Reserve and Foping Nature Reserve in Qinling to compare soil bacterial community composition and diversity using high-throughput sequencing of bacterial 16S rRNA genes. The soil chemical properties and bacterial communities differed noticeably under forest-type classification patterns. The soil of the Japanese larch planted forests underwent substantial degradation, with higher acidity, lower alpha diversity, and more significant enrichment in the oligotrophic bacteria Acidobacteria and Verrucomicrobia, in contrast to the other two primary forests with elevated soil nutrient levels. The application of PICRUSt2 indicated the down-regulation of amino acid-related metabolism in planted forests. Moreover, pH was the primary factor determining the whole bacterial community structures. To avoid the uncertainty of a single sampling region, we chose different sampling sites that could be considered as geographical factors, possibly due to environmental heterogeneity or dispersal limitations, which also explained the specific community patterns of microorganisms. Overall, this paper may help provide a scientific basis for future revegetation in giant panda habitats, highlighting the urgent need for ecological restoration and sustainable forestry management. Full article

The Japanese Ministry of Agriculture, Forestry, and Fisheries proposed to educate more people in food production as one of the objectives of the Basic Plan for Food and Nutrition Education Promotion. This cross-sectional study aims to elucidate the relationship between food production experience (agricultural, forestry, and fishery experiences) and the behavior, attitude, and knowledge of dietary recommendations among Japanese adults. This study was conducted using data obtained from the “Survey on Dietary Habits and Agriculture, Forestry, and Fishery Experiences (2019)”. This survey was conducted by mailing paper questionnaires to respondents aged 20–69 years living in 17 regions across Japan. The independent variable was food production experience. The dependent variables were each of the 13 goals of the dietary guidelines in Japan, the total score for adherence to the 13 items (low scores indicate good adherence), adherence to a Japanese-style diet, and four items on the attitude and knowledge of dietary recommendations. I also examined the association between the point in life the food production experience occurred and the above outcomes. The data obtained from 3461 participants aged 20 to 69 years were used for multivariate logistic and linear regression analyses. Food production experience was positively associated with an improved behavior, attitude, and knowledge of dietary recommendations among adults in Japan. The study found a strong relationship with food production experiences in adulthood. Full article

Pine wilt disease is a devastating forest disaster caused by Bursaphelenchus xylophilus, which has brought inestimable economic losses to the world’s forestry due to lack of effective prevention and control measures. In this paper, a porous structure CuBTC was designed to deliver avermectin (AM) and a control vector insect Japanese pine sawyer (JPS) of B. xylophilus, which can improve the biocompatibility, anti-photolysis and delivery efficacy of AM. The results illustrated the cumulative release of pH-dependent AM@CuBTC was up to 12 days (91.9%), and also effectively avoided photodegradation (pH 9.0, 120 h, retention 69.4%). From the traceable monitoring experiment, the AM@CuBTC easily penetrated the body wall of the JPS larvae and was transmitted to tissue cells though contact and diffusion. Furthermore, AM@CuBTC can effectively enhance the cytotoxicity and utilization of AM, which provides valuable research value for the application of typical plant-derived nerve agents in the prevention and control of forestry pests. AM@CuBTC as an environmentally friendly nanopesticide can efficiently deliver AM to the larval intestines where it is absorbed by the larvae. AM@CuBTC can be transmitted to the epidemic wood and dead wood at a low concentration (10 mg/L). Full article

The current study was conducted to determine the effect of adding black cumin (Nigella sativa) powder (BCP) to the Japanese quail diet on the carcass characteristics and meat quality. In this research, 240 Japanese quail chicks (mean initial body weight 9.15 ± 0.12) were divided into four groups of four replications each. Treatments consisted of the addition of BCP at levels 1, 2, and 4% to the mixed feed and control group without the BCP additive. Compared to the other groups, the group with the 2% BCP diet had a higher live weight (LW), body weight gain (BWG), and a better feed conversion ratio (FCR, p < 0.05). BCP administration had no impact on the carcass characteristics, however, BCP had a significant effect on the thigh and breast meat. The animal study protocol was approved by the Niğde Governorship, Provincial Directorate of Agriculture and Forestry, Turkey (protocol code: E-15018773-050.01.04-75932 and date of approval: 26 April 2021) for studies involving animals. Lower thiobarbituric acid (TBA), pH, peroxide, and total psychrophilic bacteria levels were found in the BCP added groups compared to the control group (p < 0.05). When compared with the control, the sensory properties such as color, juiciness, softness, and flavor were significantly higher in the BCP treated groups, especially when fed the 2% BCP diet. It can be concluded that BCP as an additive to quail feeds had a significant effect on the performance of quails as well as on the shelf life of the meat. In order to avoid health and environmental concerns, it was concluded that BCP can be used as a natural additive to replace synthetic antimicrobials and antioxidants at the level of 1–2% in quail compound feeds. Full article

The hygiene hypothesis assumes a low incidence of allergic diseases in families engaging in farming work. However, a few studies have indicated rural life as a potential risk factor for atopic dermatitis (AD). Using a large Japanese birth cohort dataset, we calculated the accumulated incidence of AD in children aged 6 months and 1, 2, and 3 years by family business and the hazard ratio. We adjusted for confounding factors. The father’s job was considered the family business. We analysed data on 41,469 father–child pairs at 6 months of age, 40,067 pairs at 1 year, 38,286 pairs at 2 years, and 36,570 pairs at 3 years. We found the highest accumulated incidence of AD among children with fathers engaged in primary industry, with 2.5% at the age of 6 months, 6.6% at 1 year, 12.0% at 2 years, and 15.4% at 3 years. Among primary industry occupations, forestry was associated with the highest incidence of AD across these ages. The hazard ratio of AD was also highest for children whose family business was primary industry. In conclusion, the highest incidence and hazard ratio of AD were observed among children whose fathers worked in primary industry. Full article