Search Results (9)

In this study, a dual-band dual-beam shared-aperture reflector antenna based on a Cassegrain configuration is designed using a frequency-selective surface (FSS) subreflector. The antenna generates two shaped beams that operate at different frequencies and can spatially overlap. One beam contour can be independently optimized by properly designing the shape of the main reflector. The contour of the second beam is defined by optimizing the unit cell and geometry of the FSS-based subreflector once the shape of the main reflector is set. The reflector antenna design is cast as the optimization of a suitably defined cost function aimed at yielding the desired directivity performance in the regions of coverage. In order to validate the proposed solution, a set of numerical experiments was conducted using most of China and Shaanxi province as benchmark examples. Full article

A frequency selective surface (FSS) integrated conformal antenna is modelled and analytical study is presented in this article. A novel antenna design known as the “M-shaped Conformal Antenna with FSS Backing for Gain Improvement” makes use of both the conformal structure and FSS technology to increase gain. The geometric shape of the M-shaped antenna, which might resemble the letter “M” or a collection of M-shaped parts, is what gives it its name. This structure can be created to alter the antenna’s resonance frequency, increase bandwidth, or adjust the emission pattern. The radiation pattern of the antenna may be precisely controlled by combining an M-shaped construction with an FSS. You may customize the radiation pattern to concentrate energy in particular directions or sectors, boosting gain and coverage, when necessary, by modifying the FSS’s geometry and physical characteristics. The combination of features makes it extremely ideal for a variety of applications where optimum gain is a crucial need, such as aerospace, communications, and radar arrays. It also enables fine control of the radiation pattern, frequency-selective gain, and interference elimination. The designed antenna consists of an M-shaped model on the visible sideways along with a complement split ring resonator and a defective ground structure on the bottom side. Antenna resonating at wideband cover several lower band wireless communication applications like Bluetooth, Wireless Fidelity (Wi-Fi), Manufacturing Communication and Pharma, Long Term Evolution-LTE, advanced 5G, and Wireless LAN with impedance bandwidth of 65%. The FSS beneath the antenna structure acts as reflector and providing additional gain and efficiency improvement of 22% and 12%, respectively. The prototype measurement supporting the simulation results with good matching in reflection coefficient and gain. Full article

In this paper, a 38 GHz 4-port multiple-input multiple-output (MIMO) antenna with considerable isolation and gain enhancement for 5G applications is introduced. The suggested antenna element is a monopole antenna composed of a circular patch with a rectangular slot etched from it and a partial ground plane is used to extend the desired frequency to operate from 36.6 GHz to 39.5 GHz with a center frequency of 38 GHz. The high isolation is achieved by arranging the four elements orthogonally and adding four stubs to reduce mutual coupling between elements at the desired frequency bands. The gain improvement is also introduced by placing a frequency selective structure (FSS) which is designed at the same frequency bands of the antenna under the suggested MIMO antenna to act as a reflector. The proposed four-element MIMO with the FSS prototype is built and tested in order to confirm the simulated results. The suggested antenna operated from 37.2 GHz to 39.2 GHz with an isolation of less than 25 dB across the obtained frequency range. The peak gain of the antenna is enhanced from 5.5 dBi to around 10 dBi by utilizing the FSS structure; furthermore, the back radiation is enhanced. The MIMO performance is validated by extracting its parameters and comparing with the simulated results. The results extracted from the simulation and the measurement show satisfactory matching along with the target band, indicating that the proposed structure could be used for 5G communications. Full article

In this article, a single-layer frequency selective surface (FSS)-loaded compact coplanar waveguide (CPW)-fed antenna is proposed for very high-gain and ultra-wideband applications. At the initial stage, a geometrically simple ultra-wideband (UWB) antenna is designed which contains CPW feed lines and a multi-stub-loaded hexagonal patch. The various stubs are inserted to improve the bandwidth of the radiator. The antenna operates at 5–17 GHz and offers 6.5 dBi peak gain. Subsequently, the proposed FSS structure is designed and loaded beneath the proposed UWB antenna to improve bandwidth and enhance gain. The antenna loaded with FSS operates at an ultra-wideband of 3–18 GHz and offers a peak gain of 10.5 dBi. The FSS layer contains 5 × 5 unit cells with a total dimension of 50 mm × 50 mm. The gap between the FSS layer and UWB antenna is 9 mm, which is fixed to obtain maximum gain. The proposed UWB antenna and its results are compared with the fabricated prototype to verify the results. Moreover, the performance parameters such as bandwidth, gain, operational frequency, and the number of FSS layers used in the proposed antenna are compared with existing literature to show the significance of the proposed work. Overall, the proposed antenna is easy to fabricate and has a low profile and simple geometry with a compact size while offering a very wide bandwidth and high gain. Due to all of its performance properties, the proposed antenna system is a strong candidate for upcoming wideband and high-gain applications. Full article

This paper presents a wideband and high-gain rectangular microstrip array antenna with a new frequency-selective surface (FSS) designed as a reflector for the sub-6 5G applications. The proposed antenna is designed to meet the US Federal Communications Commission (FCC) standard for 5G in the mid-band (3.5–5 GHz) applications. The designed antenna configuration consists of 1 × 4 rectangular microstrip array antenna with an FSS reflector to produce a semi-stable high radiation gain. The modeled FSS delivered a wide stopband transmission coefficient from 3.3 to 5.6 GHz and promised a linearly declining phase over the mid-band frequencies. An equivalent circuit (EC) model is additionally performed to verify the transmission coefficient of the proposed FSS structure for wideband signal propagation. A low-cost FR-4 substrate material was used to fabricate the antenna prototype. The proposed wideband array antenna with an FSS reflector attained a bandwidth of 2.3 GHz within the operating frequency range of 3.5–5.8 GHz, with a fractional bandwidth of 51.12%. A high gain of 12.4 dBi was obtained at 4.1 GHz with an improvement of 4.4 dBi compared to the antenna alone. The gain variation was only 1.0 dBi during the entire mid-band. The total dimension of the fabricated antenna prototype is 10.32 λ_o × 4.25 λ_o ×1.295 λ_o at a resonance frequency of 4.5 GHz. These results make the presented antenna appropriate for 5G sub-6 GHz applications. Full article

In this work, we develop single-mode fiber devices of an InAs/GaAs quantum dot (QD) by bonding a fiber array with large smooth facet, small core, and small numerical aperture to QDs in a distributed Bragg reflector planar cavity with vertical light extraction that prove mode overlap and efficient output for plug-and-play stable use and extensive study. Modulated Si doping as electron reservoir builds electric field and level tunnel coupling to reduce fine-structure splitting (FSS) and populate dominant XX and higher excitons XX⁺ and XXX. Epoxy package thermal stress induces light hole (lh) with various behaviors related to the donor field: lh h₁ confined with more anisotropy shows an additional X_Z line (its space to the traditional X lines reflects the field intensity) and larger FSS; lh h₂ delocalized to wetting layer shows a fast h₂–h₁ decay; lh h₂ confined shows D_3h symmetric higher excitons with slow h₂–h₁ decay and more confined h₁ to raise h₁–h₁ Coulomb interaction. Full article

This review paper combs through reports that have enhanced antenna gain for ultra-wideband (UWB) frequencies using frequency-selective surface (FSS) techniques. The FSS techniques found across the research landscape were mapped onto a taxonomy in order to determine the most effective method for improving antenna gain. Additionally, this study looked into the motivation behind using FSS as a reflector in UWB frequencies to obtain directional radiation. The FSS suits multiple applications due to its exceptional ability to minimize power loss in undesired transmission areas in the antenna, as well as to hinder the interference that may occur from undesirable and wasted radiation. An efficient way to obtain constant gain over a wide range of frequencies is also elaborated in this paper. Essentially, this paper offers viable prescription to enhance antenna gain for UWB applications. Methods: A comprehensive study was performed using several imminent keywords, such as “high gain using FSS”, “gain enhancement using FSS”, “high gain UWB antennas”, and “gain enhancement of UWB antennas”, in different modifications to retrieve all related articles from three primary engines: Web of Science (WoS), IEEE Xplore, and Science Direct. Results: The 41 papers identified after a comprehensive literature review were classified into two categories. The FSS single- and multi-layer reflectors were reported in 25 and 16 papers, respectively. New direction: An effective method is proposed for FSS miniaturization and for obtaining constant gain over UWB frequencies while maintaining the return loss at −10 dB. Conclusion: The use of FSS is indeed effective and viable for gain enhancement in UWB antennas. This systematic review unravels a vast range of opportunities for researchers to bridge the identified gaps. Full article

The sacrificed-QD-layer method can well control the indium deposition amount to grow InAs quantum dots (QDs) with isotropic geometry. Individual Si dopant above an (001)-based InAs QD proves a new method to build a local electric field to reduce fine structure splitting (FSS = X1−X2) and show D_3h symmetric excitons. The lowest FSS obtained is 3.9 μeV with the lowest energy X state (LX) anticlockwise rotate from [1–10] (i.e., zero FSS will be crossed in a proper field). The lateral field projection induces a large eh separation and various FSS, LX, and emission intensity polarization. The lateral field along [1–10] breaks the X1–X2 wavefunction degeneracy for independent HH and VV cascade emissions with robust polarization correlation. With FSS ~4 μeV and T₁ ~0.3 ns fastened in a distributed Bragg reflector cavity, polarization-resolved XX–X cross-correlations show fidelity ~0.55 to a maximal entangled state |HH> + |VV>. A higher fidelity and zero FSS will be obtained in the hybrid QD structure with a junction field integrated to tune the FSS and a sub-bandgap excitation to avoid influences from electrons in the barrier. Full article

This paper presents a miniaturized frequency selective surface (FSS) based on the convoluted and interdigitated stripe with multiple narrow passbands/wide stopbands in the L-/S-/C-/X-/Ku-/K-band. By using the convoluted and interdigitated stripe, the coupling inside is well controlled, so that the spatial efficiency is maximized to provide a high miniaturization. An equivalent circuit model is presented to reveal the working mechanism of the proposed FSS. The proposed structure forms four transmission band rejections of 3 dB in 1–6.65 GHz, 8.35–16.9 GHz, 18.0–24 GHz, and 24.50–27.84 GHz. The size of the unit cell is 0.09λ₀ × 0.09λ₀, where λ₀ is the wavelength of the first resonance frequency. The proposed FSS has a good angle stability and polarization stability in a scanning range up to 60°. For verification, an FSS prototype has been fabricated and measured. The measured results were in agreement with the simulated results. The proposed FSS can be used in practical applications such as radomes, antenna reflectors, and spatial filters. Full article