Search Results (6)

Cities play a critical role in anthropogenic CO₂ emissions, which exacerbate climate change and impact urban populations. Urban green infrastructure, such as urban trees, provides essential ecosystem services, including reducing atmospheric CO₂ levels. However, there is a significant knowledge gap regarding the impact of urban trees on climate change in semiarid, polluted cities like Tehran, the capital and largest metropolis of the Middle East. This study assesses the carbon sequestration and storage potential of Tehran’s urban infrastructure using the i-Tree Eco model. A randomized cluster sampling method was employed, collecting data on species composition, diameter at breast height (DBH), and total tree height. The results indicate that Tehran’s urban trees sequester approximately 60,102 tons of carbon per year, equivalent to 220,393 tons of CO₂. The net carbon storage in urban trees is about 254,579 tons, equivalent to 933,455 tons of CO₂. Parks and urban green spaces demonstrate the highest rate of carbon sequestration per hectare, followed by urban services land use. Prioritizing the planting of species with high sequestration rates like Cupressus arizonica (Arizona cypress) and Cupressus sempervirens L. var. horizontalis (Mediterranean cypress) could enhance carbon sequestration efforts in Tehran. These data provide valuable insights into the carbon sequestration potential and environmental impact of different land use types, and may aid in the development of effective environmental policies and land management strategies in semiarid urban areas and other cities in similar settings. Full article

For many decades, natural resources have traditionally been employed in skin care. Here, we explored the phytochemical profile of the aqueous and ethanolic leaf extracts of Cupressus arizonica Greene and assessed their antioxidant, antiaging and antibacterial activities in vitro. Liquid chromatography–mass spectrometry (LC-MS/MS) analysis led to the tentative identification of 67 compounds consisting mainly of phenolic and fatty acids, diterpene acids, proanthocyanidins and flavonoid and biflavonoid glycosides. The aqueous extract demonstrated substantial in vitro antioxidant potential at FRAP and DPPH assays and inhibited the four target enzymes (collagenase, elastase, tyrosinase, and hyaluronidase) engaged in skin remodeling and aging with IC₅₀ values close to those of the standard drugs. Moreover, the aqueous extract at 25 mg/mL suppressed biofilm formation by Pseudomonas aeruginosa, a bacterial pathogen causing common skin manifestations, and decreased its swarming and swimming motilities. In conclusion, C. arizonica leaves can be considered a promising candidate for potential application in skin aging. Full article

One of the main challenges of using unmanned aerial vehicles (UAVs) in forest data acquisition is the implementation of Ground Control Points (GCPs) as a mandatory step, which is sometimes impossible for inaccessible areas or within canopy closures. This study aimed to test the accuracy of a UAV-mounted GNSS RTK (real-time kinematic) system for calculating tree height and crown height without any GCPs. The study was conducted on a Cupressus arizonica (Greene., Arizona cypress) plantation on the Razi University Campus in Kermanshah, Iran. Arizona cypress is commonly planted as an ornamental tree. As it can tolerate harsh conditions, this species is highly appropriate for afforestation and reforestation projects. A total of 107 trees were subjected to field-measured dendrometric measurements (height and crown diameter). UAV data acquisition was performed at three altitudes of 25, 50, and 100 m using a local network RTK system (NRTK). The crown height model (CHM), derived from a digital surface model (DSM), was used to estimate tree height, and an inverse watershed segmentation (IWS) algorithm was used to estimate crown diameter. The results indicated that the means of tree height obtained from field measurements and UAV estimation were not significantly different, except for the mean values calculated at 100 m flight altitude. Additionally, the means of crown diameter reported from field measurements and UAV estimation at all flight altitudes were not statistically different. Root mean square error (RMSE < 11%) indicated a reliable estimation at all the flight altitudes for trees height and crown diameter. According to the findings of this study, it was concluded that UAV-RTK imagery can be considered a promising solution, but more work is needed before concluding its effectiveness in inaccessible areas. Full article

The antimicrobial activity of several essential oils (EOs) and their related microemulsions (MEs) was investigated. EOs were obtained from Cannabis sativa L. cv CS (C. sativa), Carum carvi L. (C. carvi), Crithmum maritimum L. (C. maritimum), Cuminum cyminum L. (C. cyminum), x Cupressocyparis leylandii A.B. Jacks & Dallim. (C. leylandii), Cupressus arizonica Greene (C. arizonica), Ferula assa-foetida L. (F. assa-foetida)., Ferula gummosa Boiss. (F. gummosa), Juniperus communis L. (J. communis), Juniperus x pfitzeriana (Spath) P.A. Schmidt (J. pfitzeriana), Pimpinella anisum L (P. anisum). Preliminary screening revealed that Cuminum cyminum, Crithmum maritimum, and Pimpinella anisum (10% v/v) were effective against all tested microorganisms (Escherichia coli ATCC 35218, Listeria monocytogenes ATCC 7644, Staphylococcus aureus ATCC 29213, Pseudomonas fluorescens DSM 4358, and Candida albicans ATCC 10231), with growth inhibition diameter from 10 to 25 mm. These EOs were used to formulate the MEs with an average size < 50 nm and a good stability over 30 days. EOs’ antimicrobial activity was further enhanced in the MEs, with a generalized lowering of minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) values. C. cyminum-ME reached, in most cases, MIC two times lower (0.312%) than the corresponding EO (0.625%) and even eight times lower against S. aureus (0.156 vs. 1.25%). A more remarkable microbicide effect was noted for C. cyminum-ME, with MBC values eight times lower (from 0.312 to 0.625%) than the corresponding EO (from 2.5 to 5%). Overall, MEs resulted in an efficient system for EOs encapsulation, enhancing solubility and lowering concentration to exert antimicrobial efficacy. Full article

The main objective of this research was to study heavy metal absorption by the leaves of main forest species which were planted for that purpose at post-lignite mining landscapes in Northern Greece (Ptolemais, Prefecture of Kozani), as well as in a neighboring region (Kato Grammatiko), 30 km far from the mining area. Four species were studied; two conifers (Pinus nigra Arn., Cupressus arizonica Greene) and two broad-leaved (Robinia pseudoacacia L., Populus nigra L.). The four species varied in their leaf morphology (needles, scale-like leaves, blade, compound or simple, with rough or smooth surfaces). Eighty (80) leaf samples were collected, (10 from each tree species at either site). The heavy metal concentrations measured were iron (Fe), copper (Cu), chromium (Cr), nickel (Ni), cadmium (Cd), manganese (Mn), zinc (Zn) and cobalt (Co). Statistically significant differences (p = 0.01) were found between the lignite deposit and control areas and among the studied species. Higher concentrations were measured for the studied species at the lignite deposit. Moreover, no species demonstrated maximum absorption for all metals. The metal absorption pattern by coniferous trees’ leaves at the mining landscape was similar, with highest concentrations observed for iron and lowest for cobalt [iron (Fe) > zinc (Zn) > manganese (Mn) > copper (Cu) > chromium (Cr) > nickel (Ni) > cobalt (Co)]. Both broadleaved species absorbed highest concentrations of iron, but differed in the amount of the remaining metals [black locust: iron (Fe) > manganese (Mn) > zinc (Zn) > copper (Cu) > nickel (Ni) > chromium (Cr); black poplar: iron (Fe) > zinc (Zn) > manganese (Mn) > copper (Cu) > nickel (Ni) > chromium (Cr) > cobalt (Co)]. Cadmium was detected only in black poplar at both sites. In general, black pine was found to absorb the highest concentration of iron (Fe), and black poplar zinc (Zn). We discuss the importance of carefully selecting the appropriate mixture of tree species in order to achieve maximum habitat restoration effect at heavy metal polluted sites. Full article

Given the rise in the global population and the consequently high levels of pollution, urban green areas, such as those that include plants in the Cupressaceae family, are suitable to reduce the pollution levels, improving the air quality. However, some species with ornamental value are also very allergenic species whose planting should be regulated and their pollen production reduced by suitable pruning. The Aerobiological Index to create Risk maps for Ornamental Trees (AIROT), in its previous version, already included parameters that other indexes did not consider, such as the width of the streets, the height of buildings and the geographical characteristics of cities. It can be considered by working with LiDAR (Light Detection and Ranging) data from five urban areas, which were used to create the DEM and DSM (digital elevation and surface models) needed to create one of the parameters. Pollen production is proposed as a parameter (α) based on characteristics and uses in the forms of hedges or trees that will be incorporated into the index. It will allow the comparison of different species for the evaluation of the pruning effect when aerobiological risks are established. The maps for some species of Cupressaceae (Cupressus arizonica, Cupressus macrocarpa, Cupressus sempervirens, Cupressocyparis leylandii and Platycladus orientalis) generated in a GIS (geographic information system) from the study of several functions of Kriging, have been used in cities to identify aerobiological risks in areas of tourist and gastronomic interest. Thus, allergy patients can make decisions about the places to visit depending on the levels of risk near those areas. The AIROT index provides valuable information for allergy patients, tourists, urban planning councillors and restaurant owners in order to structure the vegetation, as well as planning tourism according to the surrounding environmental risks and reducing the aerobiological risk of certain areas. Full article