Search Results (3)

In Singapore, active, beautiful, clean waters design features (ABCWDFs), such as rain gardens and vegetated swales, are used as a sustainable approach for stormwater management. Field monitoring studies characterising the performance of these design features in the tropical region are currently limited, hampering the widespread implementation of these systems. This study characterised the performance of individual ABCWDFs in the tropical climate context by monitoring a rain garden (FB7) and a vegetated swale (VS1) that were implemented in a 4-ha urban residential precinct for a period of 15 months. Results showed that total suspended solids (TSS), total phosphorus (TP) and total nitrogen (TN) concentrations were low in the new residential precinct runoff, leading to poor removal efficiency despite the effluent concentrations of individual ABCWDFs that were within the local stormwater treatment objectives. Average TSS, TP and TN EMCs of four sub-catchment outlets were lower (23.2 mg/L, 0.11 mg/L and 1.00 mg/L, respectively) when compared to the runoff quality of the major catchments in Singapore, potentially demonstrating that the ABCWDFs are effective in improving the catchment runoff quality. Findings from this study can help to better understand the performance of ABCWDFs receiving low influent concentrations and implications for further investigations to improve stormwater runoff management in the tropics. Full article

Storm water management in Singapore has always been a challenge due to intense rainfall in a flat, low-lying and urbanised catchment. PUB’s (Singapore’s National Water Agency) recent runoff control regulation limits the runoff coefficient to 0.55 for developments larger than or equal to 0.2 ha. The use of Active, Beautiful, Clean (ABC) Waters design features are encouraged to attain peak runoff reduction. Hence the paper focuses on (i) determining the actual hydrological response regime of Singapore using the relationship between runoff coefficient (C), land use and slope; and (ii) investigating the effectiveness of ABC Waters design features in delaying and reducing peak runoff using a modelling approach. Based on a Storm Water Management Model (SWMM) model and using elevation, land use and soil data as inputs, the peak C-values were obtained for 50 m × 50 m grid cells. The results show that for the same land use, the one with steeper slope resulted in a higher runoff coefficient. Simulations were carried out in two study areas, Green Walk District and Tengah Subcatchment, where ABC Waters design features (such as porous pavements, green roofs, rain gardens) and detention tanks were incorporated to reduce C-values. Results showed that peak C-values can be reduced to less than 0.55 after increasing the green areas and constructing detention facilities. Reduction in peak discharge (22% to 63%) and a delay in peak discharge by up to 30 min were also observed. Hence, it is recommended to consider the relationship between slope and land use while determining runoff coefficients; and to incorporate ABC Waters design features in urban design to reduce the peak flow and runoff coefficient (C). Full article

Active, Beautiful, Clean Waters (ABC Waters) design features—natural systems consisting of plants and soil that detain and treat rainwater runoff—comprise a major part of Sustainable urban Drainage Systems (SuDS) in Singapore. Although it is generally accepted that ABC Waters design features are able to detain runoff and reduce peak flow, their effectiveness in doing so has not been studied or documented locally. This research aims to determine their effectiveness in reducing peak flow based on a newly constructed pilot precinct named Waterway Ridges. Four types of ABC Waters features have been integrated holistically within the development, and designed innovatively to allow the precinct to achieve an effective C-value of 0.55 for the 10-year design storm; the precinct-wide integration and implemented design with the aim of substantially reducing peak flow are firsts in Singapore. The study is based on results from an uncalibrated 1D hydraulic model developed using the Storm Water Management Model (SWMM). Identification of key design elements and performance enhancement of the features via optimisation were also studied. Results show that the features are effective in reducing peak flow for the 10-year design storm, by 33%, and allowed the precinct to achieve an effective C-value of 0.60. Full article