Search Results (4)

The deposition of combustion residues in the nozzle ring (NR) of a turbocharger turbine stage changes the NR geometry significantly in a random manner. The resultant complex and highly asymmetric geometry induces low engine order (LEO) excitation, which may lead to resonance excitation of rotor blades and high cycle fatigue (HCF) failure. Therefore, a suitable prediction workflow is of great importance for the design and validation phases. The prediction of LEO excitation is, however, computationally expensive as high-fidelity, full annulus CFD models are required. Previous investigations showed that a steady-state computational model consisting of the volute, the NR, and a radial extension is suitable to reduce the computational costs massively and to qualitatively predict the level of LEO forced response. In the current paper, the aerodynamic excitation of 69 real contaminated NRs is analyzed using this simplified approach. The results obtained by the simplified simulation model are used to select 13 contaminated NR geometries, which are then simulated with a model of the entire turbine stage, including the rotor, in a transient time-marching manner to provide high-fidelity simulation results for the verification of the simplified approach. Furthermore, two contamination patterns are analyzed in a more detailed manner regarding their aerodynamic excitation. It is found that the simplified model can be used to identify and classify contamination patterns that lead to high blade vibration amplitudes. In cases where transient effects occurring in the rotor alter the harmonic pressure field significantly, the ability of the simplified approach to predict the LEO excitation is not sufficient. Full article

Considerable progress has been achieved in recent decades in understanding the phenomena related to the onset of condensation in steam flows, both experimentally and especially numerically. Nevertheless, there is still a certain disagreement between the different numerical models used. Unfortunately, the available experimental validation data are not sufficiently detailed to allow for proper validation of computational fluid dynamics (CFD) simulations. Therefore, this paper presents new experimental data for condensing steam flows, acquired in a supersonic nozzle according to Barschdorff, at the Institute of Thermal Turbomachinery Laboratory (ITSM) at the University of Stuttgart. A steady inlet pressure of approximately 784 mbar was set for three inlet temperatures down to $100.2$ ${}^{\circ }\mathrm{C}$. Condensation onset is accurately captured across the nozzle, using down to 1 mm spatial resolution for both pneumatic and light spectra measurements. CFD simulations were performed using the commercial solver ANSYS CFX. The droplet diameters are numerically overestimated by approximately a factor of 1.5. Disagreement has been found between original Barschdorff’s experiments and measurements at ITSM. However, there is a good agreement in terms of the pressure distribution along the nozzle axis between experimental and numerical results. The reproducibility of the results is excellent. Full article

The use of coupled algorithms for single fluid flow simulation has proven its superiority as opposed to segregated algorithms, especially in terms of robustness and performance. In this paper, the coupled approach is extended for the simulation of multi-fluid flows, using a collocated and pressure-based finite volume discretization technique with a Eulerian–Eulerian model. In this context a key ingredient in this method is extending the Rhie–Chow interpolation technique to account for the unique flow coupling that arises from inter-phase drag. The treatment of this inter-fluid coupling and the fashion in which it interacts with the velocity-pressure solution algorithm is presented in detail and its effect on robustness and accuracy is demonstrated using 2D dilute gas–solid flow test case. The results achieved with this technique show substantial improvement in accuracy and performance when compared to a leading commercial code for a transonic nozzle configuration. Full article

In the majority of compressible flow CFD simulations, the standard ideal gas state equation is accurate enough. However, there is a range of applications where the deviations from the ideal gas behaviour is significant enough that performance predictions are no longer valid and more accurate models are needed. While a considerable amount of the literature has been written about the application of real gas state equations in CFD simulations, there is much less information on the numerical issues involved in the actual implementation of such models. The aim of this article is to present a robust implementation of real gas flow physics in an in-house, coupled, pressure-based solver, and highlight the main difference that arises as compared to standard ideal gas model. The consistency of the developed iterative procedures is demonstrated by first comparing against results obtained with a framework using perfect gas simplifications. The generality of the developed framework is tested by using the parameters from two different real gas state equations, namely the IAPWS-97 and the cubic state equations state equations. The highly polynomial IAPWS-97 formulation for water is applied to a transonic nozzle case where steam is expanded at transonic conditions until phase transition occurs. The cubic state equations are applied to a two stage radial compressor setup. Results are compared in terms of accuracy with a commercial code and measurement data. Results are also compared against simulations using the ideal gas model, highlighting the limitations of the later model. Finally, the effects of the real gas formulations on computational time are compared with results obtained using the ideal gas model. Full article