Search Results (9)

Mycelium-bonded composites (MBCs), or myco-composites, represent a novel engineered material that combines natural lignocellulosic substrates with a fungal matrix. As a sustainable alternative to plastics, MBCs are gaining increasing interest; however, their large-scale industrial adoption remains limited, partly due to low social acceptance resulting from their unattractive appearance. Laser engraving provides a promising method for fabricating intricate patterns and functional surfaces on MBCs, minimizing tool wear, material loss, and environmental impact, while enhancing esthetic and engineering properties. This study investigates the influence of CO₂ laser parameters on the material removal rate during the engraving of myco-composites, focusing on the effects of variable laser power, beam defocus, and head feed rate on engraving outcomes. The results demonstrate that laser power and beam focus significantly impact material removal in mycelium-bonded composites. Specifically, increasing the laser power results in greater material removal, which is more pronounced when the beam is focused due to higher energy density. In contrast, a beam defocused by 1 mm produces less intense material removal. These findings highlight the critical role of beam focus—surpassing the influence of power alone—in determining engraving quality, particularly on irregular or uneven surfaces. Moreover, reducing the laser head feed rate at a constant power level increases the material removal rate linearly; however, it also results in excessive charring and localized overheating, revealing the low thermal tolerance of myco-composites. These insights are essential for optimizing laser processing techniques to fully realize the potential of mycelium-bonded composites as sustainable engineering materials, simultaneously maintaining their appearance and functional properties. Full article

The increasing frequency of extreme weather events, combined with the historic degradation of urban water systems, has prompted cities worldwide to reconsider the role of water in urban planning. This study examines the restoration and integration of historical watercourses into contemporary urban environments through blue and green infrastructure (BGI). Focusing on three case study cities—Poznań (Poland), Milan (Italy), and Beijing (China)—this research explores both spatial and regulatory conditions for reintroducing surface water into cityscapes. Utilizing historical maps, contemporary land use data, and spatial planning documents, this study applies a GIS-based multi-criteria decision analysis (GIS-MCDA) to assess restoration potential. The selected case studies, including the redesign of Park Rataje in Poznań, canal daylighting projects in Milan, and the multifunctional design of Beijing’s Olympic Forest Park, illustrate diverse approaches to ecological revitalization. The findings emphasize that restoring or recreating urban water systems can enhance urban resilience, ecological connectivity, and the quality of public space. Full article

In recent years, architectural education in Europe has focused on teaching future architects to design accessible spaces for people with disabilities. One popular teaching method is simulated disability training (SDT). This approach allows students to experience the challenges faced by disabled individuals in order to build empathy and understanding. However, SDT has sparked debate. Critics, including disability activists, argue that it may oversimplify the experiences of disabled people. They worry that it could reinforce stereotypes instead of promoting real understanding. These critics prefer expert-led training, where students learn directly from professionals and individuals with lived disability experiences. They believe that this method is more ethical and respectful. To explore this debate, the authors of this study compared the two teaching methods. They examined how well the students remembered accessibility information and how sensitive they became to disability issues. The participants, all without physical disabilities, experienced simulated disabilities such as using crutches, wheelchairs, or navigating blindfolded with a white cane. The results showed that the students who underwent the SDT retained the information better and were more sensitive to accessibility needs than those in expert-led sessions. Although SDT shows promise, the authors stress that teaching accessibility should 1 balance effectiveness with ethical concerns, ensuring dignity and respect for disabled individuals. Full article

The visual perception of interior architecture plays a crucial role in real estate marketing, influencing the decisions of buyers, interior architects, and real estate agents. These professionals rely on personal assessments of space, often drawing from their experience of using décor to influence how interiors are perceived. While intuition may validate some approaches, this study explores an under-examined aspect of interior design using a mobile eye-tracking device. It investigates how decorative elements affect spatial perception and offers insights into how individuals visually engage with interior environments. By integrating décor into the analysis of interior architecture, this study broadens the traditional scope of the field, demonstrating how décor composition can modulate spatial perception using eye-tracking technology. Results show that effective styling can redirect attention from key architectural elements, sometimes causing them to be overlooked during the critical first moments of observation commonly known as the “first impression”. These findings have important implications for interior design practice and architectural education. Full article

Mycelium-based composites (MBCs) are biomaterials with scientifically proven potential to improve sustainability in construction. Although mycelium-based products are not entirely new, their use in engineering presents challenges due to the inherent properties of this fungal material. This study investigated professional architects’ and interior designers’ perceptions of MBCs, focusing on familiarity, aesthetic appeal, and willingness to use. The first phase of the survey explored respondents’ views on material-related ecological design principles. In the second phase, respondents evaluated ten small architectural objects crafted from MBCs, focusing on form, detail, and visual appeal. The last phase of the survey measured their interest in using mycelium in their design work. The results revealed that MBCs were relatively unknown among the surveyed professionals; only every second respondent knew this material. Despite this, 90% found MBCs visually appealing after seeing the examples. Interestingly, the natural, unprocessed appearance of the material was assessed as less aesthetically pleasing, with thermal treatment improving its perceived value. Architects were more receptive to using MBCs in their professional projects for customers than for personal use. This observation points to a ‘double standard’: professional architects are more open to using MBCs in projects not intended for their own use. Full article

Mycelium-based composites (MBCs) are alternative biopolymers for designing sustainable furniture and other interior elements. These innovative biocomposites have many ecological advantages but present a new challenge in aesthetics and human product acceptance. Grown products, made using living mycelium and lignocellulosic substrates, are porous, have irregular surfaces and have irregular coloring. The natural origin of these types of materials and the fear of fungus can be a challenge. This research investigated the level of human acceptance of the new material. Respondents were students of architecture who can be considered as people involved in interior design and competent in the design field. Research has been performed on the authors’ prototype products made from MBCs. Three complementary consumer tests were performed. The obtained results measured the human reactions and demonstrated to which extents products made of MBCs were “likeable” and their nonobvious aesthetics were acceptable to the public. The results showed that MBC materials generally had a positive or not-negative assessment. The responses after the pairwise comparison of the MBC with wall cladding samples pointed out the advantage of ceramic reference material above the MBC based on an overall assessment. The respondents also believed that the chamotte clay cladding would be easier to fit into the aesthetics of a modern interior and would in better accordance with its style. Although the MBC was less visually appealing, the respondents nevertheless found it more interesting, original, and environmentally friendly. The experiments suggested that the respondents had double standards regarding MBCs. MBCs were generally accepted as ecological, but not in their own homes. All of these results support current and future applications of MBCs for manufacturing items where enhanced aesthetics are required. Full article

Mycelium-Based Composites (MBCs) are innovative engineering materials made from lignocellulosic by-products bonded with fungal mycelium. While some performance characteristics of MBCs are inferior to those of currently used engineering materials, these composites nevertheless prove to be superior in ecological aspects. Improving the properties of MBCs may be achieved using an adequate substrate type, fungus species, and manufacturing technology. This article presents scientifically verified guiding principles for choosing a fungus species to obtain the desired effect. This aim was realized based on analyses of scientific articles concerning MBCs, mycological literature, and patent documents. Based on these analyses, over 70 fungi species used to manufacture MBC have been identified and the most commonly used combinations of fungi species-substrate-manufacturing technology are presented. The main result of this review was to demonstrate the characteristics of the fungi considered optimal in terms of the resulting engineering material properties. Thus, a list of the 11 main fungus characteristics that increase the effectiveness in the engineering material formation include: rapid hyphae growth, high virulence, dimitic or trimitic hyphal system, white rot decay type, high versatility in nutrition, high tolerance to a substrate, environmental parameters, susceptibility to readily controlled factors, easy to deactivate, saprophytic, non-mycotoxic, and capability to biosynthesize natural active substances. An additional analysis result is a list of the names of fungus species, the types of substrates used, the applications of the material produced, and the main findings reported in the scientific literature. Full article

Mycelium-based composites (MBCs) have attracted growing attention due to their role in the development of eco-design methods. We concurrently analysed scientific publications, patent documents, and results of our own feasibility studies to identify the current design issues and technologies used. A literature inquiry in scientific and patent databases (WoS, Scopus, The Lens, Google Patents) pointed to 92 scientific publications and 212 patent documents. As a part of our own technological experiments, we have created several prototype products used in architectural interior design. Following the synthesis, these sources of knowledge can be concluded: 1. MBCs are inexpensive in production, ecological, and offer a high artistic value. Their weaknesses are insufficient load capacity, unfavourable water affinity, and unknown reliability. 2. The scientific literature shows that the material parameters of MBCs can be adjusted to certain needs, but there are almost infinite combinations: properties of the input biomaterials, characteristics of the fungi species, and possible parameters during the growth and subsequent processing of the MBCs. 3. The patent documents show the need for development: an effective method to increase the density and the search for technologies to obtain a more homogeneous internal structure of the composite material. 4. Our own experiments with the production of various everyday objects indicate that some disadvantages of MBCs can be considered advantages. Such an unexpected advantage is the interesting surface texture resulting from the natural inhomogeneity of the internal structure of MBCs, which can be controlled to some extent. Full article

Major changes in the organisation of the teaching process at universities in Poland had to be introduced in response to the current pandemic situation and threat of further spread of SARS-CoV-2 virus. This article presents the results of the research conducted at the Faculty of Architecture, Poznan University of Technology in view of the pilot, experimental entrance exam that excludes the evaluation of drawing skills of candidates for architectural studies in the 2020/21 recruitment process. The purpose of the research was to find a correlation between the quality of candidates accepted for the BSc (engineer) programme studies, evaluated on the basis of their drawing skills demonstrated during the entrance exam and the learning outcomes of graduates. For that purpose, the authors hereof have carried out an analysis with the use of the Spearman Rank Correlation formula. The comparative analysis has shown that candidates whose drawing skills were evaluated highly during the entrance exam did not necessarily rank as the top grade scoring graduates of the first degree study programme, and thus, it has further been shown that good drawing skills at the beginning of the study programme do not guarantee top learning results at the end of the studies. In effect, the research should become a starting point for a discussion in Poland on whether there are any justified grounds for entrance exams in drawing or whether a portfolio of works may replace it and be an effective recruitment criterion. Full article