We are pleased to invite you to read the selected papers from Polymers (ISSN: 2073-4360), from the Section “Polymer Processing and Engineering”. The paper list is as follows:

1. “Sustainable Polymer Composites Manufacturing through 3D Printing Technologies by Using Recycled Polymer and Filler”
by Daniela Fico, Daniela Rizzo, Valentina De Carolis, Francesco Montagna and Carola Esposito Corcione
Polymers 2022, 14(18), 3756; https://doi.org/10.3390/polym14183756
Full text available online: https://www.mdpi.com/2073-4360/14/18/3756

2. “Basalt Fiber Composites with Reduced Thermal Expansion for Additive Manufacturing”
by Daniel Moreno-Sanchez, Alberto Sanz de León, Daniel Moreno Nieto, Francisco J. Delgado and Sergio I. Molina
Polymers 2022, 14(15), 3216; https://doi.org/10.3390/polym14153216
Full text available online: https://www.mdpi.com/2073-4360/14/15/3216

3. “Design for 3D Printed Tools: Mechanical Material Properties for Direct Polymer Additive Tooling”
by Peter Frohn-Sörensen, Michael Geueke, Bernd Engel, Bernd Löffler, Philipp Bickendorf, Arian Asimi, Georg Bergweiler and Günther Schuh
Polymers 2022, 14(9), 1694; https://doi.org/10.3390/polym14091694
Full text available online: https://www.mdpi.com/2073-4360/14/9/1694

4. “Hybrid Manufacturing of Acrylonitrile Butadiene Styrene (ABS) via the Combination of Material Extrusion Additive Manufacturing and Injection Molding”
by Ke Gong, Handai Liu, Cheng Huang, Zhi Cao, Evert Fuenmayor and Ian Major
Polymers 2022, 14(23), 5093; https://doi.org/10.3390/polym14235093
Full text available online: https://www.mdpi.com/2073-4360/14/23/5093

5. “High-Resolution 3D Printing Fabrication of a Microfluidic Platform for Blood Plasma Separation”
by Daniela Fico, Daniela Rizzo, Valentina De Carolis, Francesco Montagna and Carola Esposito Corcione
Polymers 2022, 14(13), 2537; https://doi.org/10.3390/polym14132537
Full text available online: https://www.mdpi.com/2073-4360/14/13/2537

6. “Rheological Behavior and Dynamic Mechanical Properties for Interpretation of Layer Adhesion in FDM 3D Printing”
by Supaphorn Thumsorn, Wattanachai Prasong, Takashi Kurose, Akira Ishigami, Yutaka Kobayashi and Hiroshi Ito
Polymers 2022, 14(13), 2721; https://doi.org/10.3390/polym14132721
Full text available online: https://www.mdpi.com/2073-4360/14/13/2721

7. “CaCO₃ Polymorphs Used as Additives in Filament Production for 3D Printing”
by Lucie Zárybnická, Radek Ševčík, Jaroslav Pokorný, Dita Machová, Eliška Stránská and Jiří Šál
Polymers 2022, 14(1), 199; https://doi.org/10.3390/polym14010199
Full text available online: https://www.mdpi.com/2073-4360/14/1/199

8. “Wood Warping Composite by 3D Printing”
by Doron Kam, Ido Levin, Yinnon Kutner, Omri Lanciano, Eran Sharon, Oded Shoseyov and Shlomo Magdassi
Polymers 2022, 14(4), 733; https://doi.org/10.3390/polym14040733
Full text available online: https://www.mdpi.com/2073-4360/14/4/733

You can check all publications in the Section “Polymer Processing and Engineering” at the following link: https://www.mdpi.com/search?journal=polymers&section=805.