Innovative Solving Process Problems of Micro-Turbine Machining Using Computer-Aided Innovation Method †
Abstract
:1. Introduction
2. Methods of Process Innovation
3. Innovative Solution to the Machining Process of Micro-Turbine
3.1. The Machining Process of a Micro-Turbine
3.2. Solving the Machining Process Problem of a Micro-Turbine
- (1)
- Formal description of process problems.
- (2)
- Obtaining ideas for solving process problems.
- (3)
- Iterative solution of micromachining process problems.
- (4)
- Innovative scheme design and machining test.
4. Conclusions
Author Contributions
Funding
Institutional Review Board Statement
Informed Consent Statement
Data Availability Statement
Conflicts of Interest
References
- Feng, Y.X.; Zhao, Y.L.; Zheng, H.; Li, Z.W.; Tan, J.R. Data-driven product design toward intelligent manufacturing: A review. Int. J. Adv. Robot. Syst. 2020, 17, 1729881420911257. [Google Scholar] [CrossRef]
- Moslemipour, G.; Lee, T.; Rilling, D. A review of intelligent approaches for designing dynamic and robust layouts in flexible manufacturing systems. Int. J. Adv. Manuf. Technol. 2012, 60, 11–27. [Google Scholar] [CrossRef]
- Ba, S.; Jain, N.; Joseph, V.R.; Singh, R. Integrating Analytical Models with Finite-Element Models: An Application in Micromachining. J. Qual. Technol. 2013, 45, 200–212. [Google Scholar] [CrossRef]
- Lalakiya, M.R. Micromachining process—Current situation and challenges. In 2015 2nd International Conference on Mechatronics and Mechanical Engineering; Tandon, P., Guo, M., Eds.; EDP Sciences: Singapore, 2015; Volume 34, p. 02006. [Google Scholar]
- Wang, G.; Tian, X.; Geng, J.; Guo, B. A knowledge accumulation approach based on bilayer social wiki network for computer-aided process innovation. Int. J. Prod. Res. 2015, 53, 2365–2382. [Google Scholar] [CrossRef]
- Wang, G.; Hu, Y.; Tian, X.; Geng, J.; Hu, G.; Zhang, M. An Integrated Open Approach to Capturing Systematic Knowledge for Manufacturing Process Innovation Based on Collective Intelligence. Appl. Sci. 2018, 8, 340. [Google Scholar] [CrossRef]
- Carbone, F.; Contreras, J.; Hernández, J.Z.; Gomez-Perez, J.M. Open Innovation in an Enterprise 3.0 framework: Three case studies. Expert Syst. Appl. 2012, 39, 8929–8939. [Google Scholar] [CrossRef]
- Chinkatham, T.; Cavallucci, D. Early feasibility evaluation of Solution Concepts in an Inventive Design Method Framework: Approach and support tool. Comput. Ind. 2015, 67, 1–16. [Google Scholar] [CrossRef]
- Dooley, L.; O’Sullivan, D. Systems innovation: Managing manufacturing systems redesign. Int. J. Comput. Integr. Manuf. 2000, 13, 410–421. [Google Scholar] [CrossRef]
- Molcho, G.; Zipori, Y.; Schneor, R.; Rosen, O.; Goldstein, D.; Shpitalni, M. Computer aided manufacturability analysis: Closing the knowledge gap between the designer and the manufacturer. CIRP Ann. Manuf. Technol. 2008, 57, 153–158. [Google Scholar] [CrossRef]
- Al-wswasi, M.; Ivanov, A.; Makatsoris, H. A survey on smart automated computer-aided process planning (ACAPP) techniques. Int. J. Adv. Manuf. Technol. 2018, 97, 809–832. [Google Scholar] [CrossRef]
- Cardoso, P.; Davim, J.P. Optimization of Surface Roughness in Micromilling. Mater. Manuf. Process. 2010, 25, 1115–1119. [Google Scholar] [CrossRef]
- Chechurin, L.; Borgianni, Y. Understanding TRIZ through the review of top cited publications. Comput. Ind. 2016, 82, 119–134. [Google Scholar] [CrossRef]
- Cascini, G. TRIZ-based anticipatory design of future products and processes. J. Integr. Des. Process Sci. 2012, 16, 29–63. [Google Scholar] [CrossRef]
- Vinodh, S.; Kamala, V.; Jayakrishna, K. Integration of ECQFD, TRIZ, and AHP for innovative and sustainable product development. Appl. Math. Model. 2014, 38, 2758–2770. [Google Scholar] [CrossRef]
- Wang, G.; Tian, X.; Hu, Y.; Evans, R.D.; Tian, M.; Wang, R. Manufacturing Process Innovation-Oriented Knowledge Evaluation Using MCDM and Fuzzy Linguistic Computing in an Open Innovation Environment. Sustainability 2017, 9, 1630. [Google Scholar] [CrossRef]
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations. |
© 2021 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).
Share and Cite
Huang, P.; Wang, G.; Zhang, D. Innovative Solving Process Problems of Micro-Turbine Machining Using Computer-Aided Innovation Method. Eng. Proc. 2021, 4, 19. https://doi.org/10.3390/Micromachines2021-09550
Huang P, Wang G, Zhang D. Innovative Solving Process Problems of Micro-Turbine Machining Using Computer-Aided Innovation Method. Engineering Proceedings. 2021; 4(1):19. https://doi.org/10.3390/Micromachines2021-09550
Chicago/Turabian StyleHuang, Pu, Gangfeng Wang, and Dong Zhang. 2021. "Innovative Solving Process Problems of Micro-Turbine Machining Using Computer-Aided Innovation Method" Engineering Proceedings 4, no. 1: 19. https://doi.org/10.3390/Micromachines2021-09550