Order Article Reprints

Smirnov A, Yanushevich O, Krikheli N, Zhukovskaya Y, Soloninkin M, Naumenko P, Solis Pinargote NW, Peretyagin P, Grigoriev S, Nikitin N. The Effect of Layer Thickness and Nozzle Diameter in Fused Deposition Modelling Printing on the Flexural Strength of Zirconia Ceramic Samples Produced by a Multistage Manufacturing Process. Ceramics. 2025; 8(1):10. https://doi.org/10.3390/ceramics8010010

Smirnov, Anton, Oleg Yanushevich, Natella Krikheli, Yulia Zhukovskaya, Mihail Soloninkin, Petr Naumenko, Nestor Washington Solis Pinargote, Pavel Peretyagin, Sergey Grigoriev, and Nikita Nikitin. 2025. "The Effect of Layer Thickness and Nozzle Diameter in Fused Deposition Modelling Printing on the Flexural Strength of Zirconia Ceramic Samples Produced by a Multistage Manufacturing Process" Ceramics 8, no. 1: 10. https://doi.org/10.3390/ceramics8010010

Smirnov, A., Yanushevich, O., Krikheli, N., Zhukovskaya, Y., Soloninkin, M., Naumenko, P., Solis Pinargote, N. W., Peretyagin, P., Grigoriev, S., & Nikitin, N. (2025). The Effect of Layer Thickness and Nozzle Diameter in Fused Deposition Modelling Printing on the Flexural Strength of Zirconia Ceramic Samples Produced by a Multistage Manufacturing Process. Ceramics, 8(1), 10. https://doi.org/10.3390/ceramics8010010