Next Article in Journal
Modeling of Feedstock Formability to Optimize Mold Design and Prevent Possible Defects During Metal Injection Molding
Next Article in Special Issue
DP600 Steel Stampability Analysis Through Microstructural Characterization by Electron Backscatter Diffraction and Nanoindentation
Previous Article in Journal
ANOVA Based Optimization of UV Nanosecond Laser for Polyamide Insulation Removal from Platinum Wires Under Water Confinement
Previous Article in Special Issue
Development of Deep Drawing Processes Under Indirect Hot Stamping Method for an Automotive Internal Combustion Engine Oil Pan Made from Ultra-High-Strength Steel (UHSS) Sheets Using Finite Element Simulation with Experimental Validation
 
 
Article

Article Versions Notes

J. Manuf. Mater. Process. 2025, 9(6), 202; https://doi.org/10.3390/jmmp9060202
Action Date Notes Link
article xml file uploaded 18 June 2025 11:44 CEST Original file -
article xml uploaded. 18 June 2025 11:44 CEST Update https://www.mdpi.com/2504-4494/9/6/202/xml
article pdf uploaded. 18 June 2025 11:44 CEST Version of Record https://www.mdpi.com/2504-4494/9/6/202/pdf
article html file updated 18 June 2025 11:47 CEST Original file -
article html file updated 25 June 2025 10:12 CEST Update https://www.mdpi.com/2504-4494/9/6/202/html
Back to TopTop