Next Article in Journal
Interfacial Stability of Additively Manufactured Alloy 625–GRCop-42 Bimetallic Structures
Next Article in Special Issue
Evolution of Microstructure, Phase Composition, and Mechanical Properties During Thermomechanical Treatment of Co-Cr-Mo Alloy
Previous Article in Journal
Influence of the Oscillation Parameters Amplitude and Frequency on the Microstructure of Laser-Welded Thin Nitinol Foils
Previous Article in Special Issue
Erosion Wear Behavior of HVAF-Sprayed WC/Cr3C2-Based Cermet and Martensitic Stainless Steel Coatings on AlSi7Mg0.3 Alloy: A Comparative Study
 
 

Order Article Reprints

Journal: J. Manuf. Mater. Process., 2025
Volume: 9
Number: 33

Article: Material Characterisation Experiments and Data Preparation for a Finite Element Analysis of the Deep Drawing Process Using AA 1050-O
Authors: by Blessed Sarema, Stephen Matope, Matthias Nagel and Andreas Sterzing
Link: https://www.mdpi.com/2504-4494/9/2/33

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop