Next Article in Journal
Numerical Investigation of Step Size Effect on Formability of 2024-T3 Aluminum in Incremental Forming
Next Article in Special Issue
Multi-Response Optimization and Influence of Expanded Graphite on Performance of WEDM Process of Ti6Al4V
Previous Article in Journal
The Experimental and Modeling Study of Femtosecond Laser-Ablated Silicon Surface
Previous Article in Special Issue
Optimization of Wire-EDM Process Parameters for Al-Mg-0.6Si-0.35Fe/15%RHA/5%Cu Hybrid Metal Matrix Composite Using TOPSIS: Processing and Characterizations
 
 

Order Article Reprints

Journal: J. Manuf. Mater. Process., 2023
Volume: 7
Number: 69

Article: Experimental Investigation on the Cutting of Additively Manufactured Ti6Al4V with Wire-EDM and the Analytical Modelling of Cutting Speed and Surface Roughness
Authors: by Manuela Galati, Paolo Antonioni, Flaviana Calignano and Eleonora Atzeni
Link: https://www.mdpi.com/2504-4494/7/2/69

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop