Advanced Manufacturing and Machining Processes
Funding
Conflicts of Interest
References
- Heinzel, J.; Sackmann, D.; Karpuschewski, B. Micromagnetic Analysis of Thermally Induced Influences on Surface Integrity Using the Burning Limit Approach. J. Manuf. Mater. Process. 2019, 3, 93. [Google Scholar] [CrossRef] [Green Version]
- Mirifar, S.; Kadivar, M.; Azarhoushang, B. First Steps through Intelligent Grinding Using Machine Learning via Integrated Acoustic Emission Sensors. J. Manuf. Mater. Process. 2020, 4, 35. [Google Scholar] [CrossRef]
- Platt, T.; Meijer, A.; Biermann, D. Conduction-Based Thermally Assisted Micromilling Process for Cutting Difficult-to-Machine Materials. J. Manuf. Mater. Process. 2020, 4, 34. [Google Scholar] [CrossRef]
- Adeniji, D.; Schoop, J.; Gunawardena, S.; Hanson, C.; Jahan, M. Characterization and Modeling of Surface Roughness and Burr Formation in Slot Milling of Polycarbonate. J. Manuf. Mater. Process. 2020, 4, 59. [Google Scholar] [CrossRef]
- Brown, I.; Schoop, J. An Iterative Size Effect Model of Surface Generation in Finish Machining. J. Manuf. Mater. Process. 2020, 4, 63. [Google Scholar] [CrossRef]
- Denkena, B.; Bergmann, B.; Stoppel, D. Reconstruction of Process Forces in a Five-Axis Milling Center with a LSTM Neural Network in Comparison to a Model-Based Approach. J. Manuf. Mater. Process. 2020, 4, 62. [Google Scholar] [CrossRef]
- Baumann, J.; Wirtz, A.; Siebrecht, T.; Biermann, D. Disturbance of the Regenerative Effect by Use of Milling Tools Modified with Asymmetric Dynamic Properties. J. Manuf. Mater. Process. 2020, 4, 67. [Google Scholar] [CrossRef]
- Wang, Z.; Zhang, R.; Keogh, P. Real-Time Laser Tracker Compensation of Robotic Drilling and Machining. J. Manuf. Mater. Process. 2020, 4, 79. [Google Scholar] [CrossRef]
- Lakner, T.; Hardt, M. A Novel Experimental Test Bench to Investigate the Effects of Cutting Fluids on the Frictional Conditions in Metal Cutting. J. Manuf. Mater. Process. 2020, 4, 45. [Google Scholar] [CrossRef]
- De Bartolomeis, A.; Shokrani, A. Electrohydrodynamic Atomization for Minimum Quantity Lubrication (EHDA-MQL) in End Milling Ti6Al4V Titanium Alloy. J. Manuf. Mater. Process. 2020, 4, 70. [Google Scholar] [CrossRef]
- Demarbaix, A.; Ducobu, F.; Preux, N.; Petit, F.; Rivière-Lorphèvre, E. Green Ceramic Machining: Influence of the Cutting Speed and the Binder Percentage on the Y-TZP Behavior. J. Manuf. Mater. Process. 2020, 4, 50. [Google Scholar] [CrossRef]
- Bhat, P.; Agrawal, C.; Khanna, N. Development of a Sustainability Assessment Algorithm and Its Validation Using Case Studies on Cryogenic Machining. J. Manuf. Mater. Process. 2020, 4, 42. [Google Scholar] [CrossRef]
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations. |
© 2020 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).
Share and Cite
Shokrani, A.; Biermann, D. Advanced Manufacturing and Machining Processes. J. Manuf. Mater. Process. 2020, 4, 102. https://doi.org/10.3390/jmmp4040102
Shokrani A, Biermann D. Advanced Manufacturing and Machining Processes. Journal of Manufacturing and Materials Processing. 2020; 4(4):102. https://doi.org/10.3390/jmmp4040102
Chicago/Turabian StyleShokrani, Alborz, and Dirk Biermann. 2020. "Advanced Manufacturing and Machining Processes" Journal of Manufacturing and Materials Processing 4, no. 4: 102. https://doi.org/10.3390/jmmp4040102
APA StyleShokrani, A., & Biermann, D. (2020). Advanced Manufacturing and Machining Processes. Journal of Manufacturing and Materials Processing, 4(4), 102. https://doi.org/10.3390/jmmp4040102