Next Article in Journal
Developing a Zener–Hollomon Based Forming Limit Surface for Warm Sheet Forming of Magnesium Alloy
Previous Article in Journal
Batch Processing in Preassembled Die Sets—A New Process Design for Isothermal Forging of Titanium Aluminides
Article Menu
Issue 1 (March) cover image

Export Article

Open AccessFeature PaperEditorial
J. Manuf. Mater. Process. 2018, 2(1), 2;

Acknowledgement to Reviewers of Journal of Manufacturing and Materials Processing in 2017

MDPI AG, St. Alban-Anlage 66, 4052 Basel, Switzerland
Received: 9 January 2018 / Revised: 9 January 2018 / Accepted: 9 January 2018 / Published: 9 January 2018
Full-Text   |   PDF [285 KB, uploaded 9 January 2018]
Note: In lieu of an abstract, this is an excerpt from the first page.


Peer review is an essential part in the publication process, ensuring that JMMP maintains high quality standards for its published papers. In 2017, a total of 22 papers were published in the journal.[...] View Full-Text
This is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited (CC BY 4.0).

Share & Cite This Article

MDPI and ACS Style

JMMP Editorial Office. Acknowledgement to Reviewers of Journal of Manufacturing and Materials Processing in 2017. J. Manuf. Mater. Process. 2018, 2, 2.

Show more citation formats Show less citations formats

Note that from the first issue of 2016, MDPI journals use article numbers instead of page numbers. See further details here.

Article Metrics

Article Access Statistics



[Return to top]
J. Manuf. Mater. Process. EISSN 2504-4494 Published by MDPI AG, Basel, Switzerland RSS E-Mail Table of Contents Alert
Back to Top