Prediction and Application of Drilling-Induced Fracture Occurrences under Different Stress Regimes

Identifying and categorizing drilling-induced fractures is pivotal for understanding the mechanisms underlying wellbore instability, drilling fluid loss, and assessing reservoirs using imaging logging data. This study employs a linear elastic stress model around the wellbore, coupled with a tensile failure criterion, to establish a predictive framework for the orientation of drilling-induced fractures. It investigates how engineering parameters like wellbore trajectory and bottomhole pressure influence the distribution of principal stresses around the wellbore, as well as the angle and orientation of drilling-induced fractures relative to the wellbore axis, across various faulting scenarios. The results indicate that drilling-induced fractures exhibit structured arrangements and consistent patterns, often appearing at approximately 180° symmetric intervals and descending in similar orientations. This provides a theoretical basis for their systematic identification and classification. Under different stress conditions, these fractures can manifest as feather-like shapes, “J”-shaped, or transitional states between feather-like and “J”-shaped orientations, as well as “V”-shaped or “M”-shaped orientations. Accurate detection and classification of these fractures are essential for interpreting effective fractures, conducting thorough reservoir evaluations, and predicting appropriate drilling fluid densities to mitigate the wellbore failure risk. Moreover, this knowledge aids in effectively determining the magnitude and direction of in situ stress inversion.