Next Article in Journal
Impact Analysis of the External Shocks on the Prices of Malaysian Crude Palm Oil: Evidence from a Structural Vector Autoregressive Model
Next Article in Special Issue
On New Generalized Viscosity Implicit Double Midpoint Rule for Hierarchical Problem
Previous Article in Journal
Intelligent Deep Learning for Anomaly-Based Intrusion Detection in IoT Smart Home Networks
Previous Article in Special Issue
An Inertial Modified S-Algorithm for Convex Minimization Problems with Directed Graphs and Its Applications in Classification Problems
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

The Gao-Type Constant of Absolute Normalized Norms on ℝ2

1
School of Mathematics and Statistics, Chongqing Three Gorges University, Chongqing 404020, China
2
School of Environmental and Chemical Engineering, Chongqing Three Gorges University, Chongqing 404020, China
*
Author to whom correspondence should be addressed.
Mathematics 2022, 10(23), 4591; https://doi.org/10.3390/math10234591
Submission received: 5 November 2022 / Revised: 1 December 2022 / Accepted: 1 December 2022 / Published: 4 December 2022

Abstract

:
In this paper, we present an extraordinary method to calculate the Gao-type constant of absolute normalized norms on R 2 . By using our method, we not only provide the values of the Gao-type constant in new specific spaces, but also improve well-known results from the existing literature.
MSC:
46B20; 46B25

1. Introduction

The geometric theory of Banach spaces is an important research direction of a nonlinear functional analysis and has been widely applied in many fields of modern mathematics, such as differential equations, economics, optimization, game theory, fixed point theory, dynamic system theory, and so on. In particular, Kirk proved that the Banach space with normal structure has a fixed point property. Since then, research on the existence of fixed points for nonlinear differential equations by using the geometric properties of Banach spaces has rapidly developed. In recent years, many scholars have introduced geometrical constants that could easily describe the geometry properties of Banach spaces (see [1,2,3,4,5,6,7,8]).
Let X be a Banach space with a norm · . The unit sphere of X is denoted by S X and the unit ball of X is denoted by B X . The constant c NJ ( X ) , which is defined by Gao in [9], is as follows:
c NJ ( X ) = inf x + y 2 + x y 2 4 : x , y S X .
The Gao constant c NJ ( X ) , which plays an important role in [10], was intensively studied by some scholars, in which the famous Tingley problem [11] was partially solved. They gave specific descriptions of the geometric properties, such as uniformly non-square and the normal structure in the context of the fixed point property (see [12,13,14,15,16]). Now, let us collect some properties of constant c NJ ( X ) as follows:
(i)
Let X be a Banach space, then 1 2 c NJ ( X ) 1 .
(ii)
X is uniformly non-square if and only if c NJ ( X ) > 1 2 .
(iii)
X is an inner product space if and only if c NJ ( X ) = 1 .
It is easy to see that the calculation of the constant c NJ ( X ) for some concrete spaces is important. Sequences on the Gao constant c NJ ( X ) for various spaces were presented, for example, Gao calculated the constant c NJ ( X ) of the spaces p (see [9]), Cui and Wang computed the value of c NJ ( X ) for the Lorentz sequence space using the absolute normalized norms (see [17]), Zuo and Cui used the formula to calculate the constant c NJ ( X ) by the modulus of smoothness ρ 1 ( ϵ ) ; however, they did not find the exact values of c NJ ( X ) . It is hard to compute the values of ρ 1 ( ϵ ) in some concrete Banach spaces (see [13]).
Motivated by the constant C NJ ( p ) ( X ) from [18], i.e.,
C NJ ( p ) ( X ) = sup x + y p + x y p 2 p 1 ( x p + y p ) : x + y 0 ,
Asif et al. [16] considered the following Gao-type constant:
c NJ ( p ) ( X ) = inf x + y p + x y p 2 p : x , y S X ,
where 1 p < + is a constant. It is obvious that the Gao-type constant is a generalization of the constant c NJ ( X ) (in fact, c NJ ( X ) = c NJ ( 2 ) ( X ) ). Therefore, the Gao-type constant c NJ ( p ) ( X ) is more important than the Gao constant c NJ ( X ) , which plays a significant role in the geometry theory of Banach spaces. The exact values of c NJ ( X ) have been calculated for some classical spaces, such as the space p , the Lorentz sequence space, the Cesàro space, etc. Naturally, the studies on the values of the Gao-type constant c NJ ( p ) ( X ) for these spaces are important. In [16], Asif et al. only obtained 1 2 p 1 c NJ ( p ) ( X ) 1 for any Banach space X and c NJ ( p ) ( R 2 , . 1 ) = 1 2 p 1 , However, some problems in the existing literature need solving; for instance, how does one compute the values of the constant c NJ ( p ) ( X ) for the absolute normalized norms of some concrete Banach spaces? Can it be used to characterize the inner product space for the value of the Gao-type constant c NJ ( p ) ( X ) ? The main purpose of this paper is to solve the above problems.

2. Preliminaries and Notations

First, we define the general mean and provide an example of the weighted mean of order s.
 Definition 1.
Let x , y be real numbers, such that x < y . Then, any number m : = m ( x , y ) is called a mean of x and y if it satisfies
x m ( x , y ) y .
One of the most known means is the weighted mean of the order s, which is defined as
m [ s ] ( x , y ; ω , 1 ω ) = ( ω x s + ( 1 ω ) y s ) 1 s , s { 0 , + , } , x ω y 1 ω , s = 0 , max { x , y } , s = + , min { x , y } , s = ,
where x , y are positive real numbers and ω ( 0 , 1 ) .
A norm on R 2 is called absolute, if for all ( x , y ) R 2 , it satisfies
( x , y ) = ( | x | , | y | ) .
A norm · is called normalized if
( 1 , 0 ) = ( 0 , 1 ) = 1 .
The set of all absolute normalized norms on R 2 is denoted by N α 2 . Let Φ denote the set of all convex functions on [ 0 , 1 ] with φ ( 0 ) = φ ( 1 ) = 1 , satisfying
max { 1 t , t } φ ( t ) 1 .
 Proposition 1
([19]). If · N α 2 , then φ ( t ) = ( 1 t , t ) Φ . Moreover, if φ ( t ) Φ , then
( x , y ) φ = 0 , ( x , y ) = ( 0 , 0 ) , ( | x | + | y | ) φ | y | | x | + | y | , ( x , y ) ( 0 , 0 )
is a norm · φ N α 2 .
The typical example is the p norm as follows:
( x , y ) p = ( | x | p + | y | p ) 1 p , 1 p < , max { | x | , | y | } , p = .
The corresponding convex function φ p ( t ) is defined as
φ p ( t ) = { ( 1 t ) p + t p } 1 p , 1 p < , max { 1 t , t } , p = .
It is well known that · · φ · 1 for any · φ N α 2 . Moreover, by taking different convex functions φ ( t ) , Proposition 1 also enables us to obtain many non- p norms. The following lemma will help us utilize our results.
 Lemma 1
([20]). Let φ ( t ) and μ ( t ) be functions of [ a , b ] with φ ( t ) μ ( t ) > 0 for all t [ a , b ] . If φ ( t ) μ ( t ) attains the maximum at t = c [ a , b ] and the function μ ( t ) attains the minimum at t = c , then the function φ ( t ) μ ( t ) attains its maximum at t = c .

3. Main Results

Firstly, we will obtain some equivalent definitions of the Gao-type constant c NJ ( p ) ( X ) from Proposition 4.3 in [21].
 Proposition 2.
For 1 p < + , then
c NJ ( p ) ( X ) = inf x + y p + x y p 2 p : x , y B X , = inf x + y p + x y p 2 p min ( x p , y p ) , x + y 0 .
 Proposition 3.
Let X be a nontrivial Banach space, then
c NJ ( p ) ( X ) = inf c NJ ( p ) ( Y ) : Y ( X ) ,
where ( X ) is the set of all two-dimensional subspaces of X.
 Proof. 
Firstly, we have
c NJ ( p ) ( X ) inf c NJ ( p ) ( Y ) : Y ( X ) .
Secondly, for any ε > 0 , there exist x and y in S X , such that
c NJ ( p ) ( X ) > x + y p + x y p 2 p ε .
Let x , y Y ( X ) , then
x + y p + x y p 2 p c NJ ( p ) ( Y ) inf c NJ ( p ) ( Y ) : Y ( X ) ,
thus, we obtain
c NJ ( p ) ( X ) inf c NJ ( p ) ( Y ) : Y ( X ) ε .
Since ε > 0 is arbitrary, we have
c NJ ( p ) ( X ) inf c NJ ( p ) ( Y ) : Y P ( X ) .
The proof is completed. □
 Theorem 1.
Let · and | · | be two norms, such that
α | · | · β | · | ,
where α and β are constants with 0 < α < β , then
α p c NJ ( p ) ( | · | ) β p c NJ ( p ) ( · ) β p c NJ ( p ) ( | · | ) α p .
Moreover, if · = k | · | , where k > 0 is a constant, then c NJ ( p ) ( · ) = c NJ ( p ) ( | · | ) .
 Proof. 
First, we have
c NJ ( p ) ( · ) = inf x + y p + x y p 2 p min ( x p , y p ) : x + y 0 inf β p { | x + y | p + | x y | p } α p 2 p min ( | x | p , | y | p ) : x + y 0 = β p α p inf { | x + y | p + | x y | p } 2 p min ( | x | p , | y | p ) : x + y 0 ) β p α p c NJ ( p ) ( | · | ) .
Similarly, we can obtain the following inequality:
α p c NJ ( p ) ( | · | ) β p c NJ ( p ) ( · ) .
The proof is completed. □
Now, let us denote
M 1 = max 0 t 1 φ ( t ) μ ( t ) and M 2 = max 0 t 1 μ ( t ) φ ( t ) .
 Theorem 2.
Let φ ( t ) , μ ( t ) Φ and φ ( t ) μ ( t ) for all t [ 0 , 1 ] . Suppose that φ ( t ) μ ( t ) attains its maximum at t = 1 2 and c NJ ( p ) ( · μ ) = 1 2 p 1 μ p ( 1 2 ) , then
c NJ ( p ) ( · φ ) = 1 2 p 1 φ p ( 1 2 ) .
 Proof. 
From the condition of φ ( t ) μ ( t ) and the definition of M 1 , one has
· μ · φ M 1 · μ .
By taking α = 1 and β = M 1 in Theorem 1, we obtain the following inequality:
c NJ ( p ) ( · φ ) 1 M 1 p c NJ ( p ) ( · μ ) .
Since the function φ ( t ) μ ( t ) attains its maximum at t = 1 2 , i.e., M 1 = φ ( 1 2 ) μ ( 1 2 ) , and note that c NJ ( p ) ( · μ ) = 1 2 p 1 μ p ( 1 2 ) , then
c NJ ( p ) ( · φ ) 1 M 1 p c NJ ( p ) ( · μ ) = 1 2 p 1 φ p ( 1 2 ) .
Let us put x 1 = 1 2 φ ( 1 2 ) , 1 2 φ ( 1 2 ) and y 1 = 1 2 φ ( 1 2 ) , 1 2 φ ( 1 2 ) , then
x 1 φ = y 1 φ = 1 ,
x 1 + y 1 φ = x 1 y 1 φ = 1 φ ( 1 2 ) ,
c NJ ( p ) ( · φ ) x 1 + y 1 p + x 1 y 1 p 2 p = 1 2 p 1 φ p ( 1 2 ) .
From (1) and (2), we obtain
c NJ ( p ) ( · φ ) = 1 M 1 p c NJ ( p ) ( · μ ) = 1 2 p 1 φ p ( 1 2 ) .
 Theorem 3.
Let φ ( t ) Φ and φ ( t ) φ p ( t ) ( 1 < p 2 ) for all t [ 0 , 1 ] , then
c NJ ( p ) ( · φ ) = 1 M 1 p .
 Proof. 
Let x , y S X . By the condition that φ ( t ) φ p ( t ) ( 1 < p 2 ) for all t [ 0 , 1 ] and the Clarkson inequality in [22], we have
x + y φ p + x y φ p ( x + y p p + x y p p ) 2 p 1 ( x p p + y p p ) 2 p 1 M 1 p ( x φ p + y φ p ) = 2 p M 1 p .
The definition of c NJ ( p ) ( · φ ) implies that
c NJ ( p ) ( · φ ) 1 M 1 p .
On the other hand, note that φ ( t ) ψ p ( t ) attains its maximum M 1 = φ ( t 1 ) φ p ( t 1 ) . Let us put x 2 = ( 1 t 1 , t 1 ) and y 2 = ( 1 t 1 , t 1 ) , then
x 2 φ = y 2 φ = φ ( t 1 ) .
x 2 + y 2 φ p + x 2 y 2 φ p = 2 p [ ( 1 t 1 ) p + ( t 1 ) p ] , = 2 p φ p p ( t 1 ) , = 2 p M 1 p φ p ( t 1 ) .
Therefore, we can obtain
c NJ ( p ) ( · φ ) x 2 + y 2 φ p + x 2 y 2 φ p 2 p min ( x 2 φ p , y 2 φ p ) = 1 M 1 p .
From inequalities (3) and (4), we infer that
c NJ ( p ) ( · φ ) = 1 M 1 p .
We complete the proof. □
 Theorem 4.
Let φ ( t ) , μ ( t ) Φ and φ ( t ) μ ( t ) for all t [ 0 , 1 ] . Suppose that μ ( t ) φ ( t ) attains its maximum at t = 1 2 and c NJ ( p ) ( · μ ) = 2 μ p ( 1 2 ) , then
c NJ ( p ) ( · φ ) = 2 φ p 1 2 .
 Proof. 
From the condition that φ ( t ) μ ( t ) and the definition of M 2 , we can obtain
1 M 2 · μ · φ · μ .
Taking α = 1 M 2 and β = 1 in Theorem 1, we have
c NJ ( p ) ( · φ ) 1 M 2 p c NJ ( p ) ( · μ ) .
Since M 2 = μ ( 1 2 ) φ ( 1 2 ) and c NJ ( p ) ( · μ ) = 2 μ p ( 1 2 ) , then
c NJ ( p ) ( · φ ) 1 M 2 p c NJ ( p ) ( · μ ) = 2 φ p 1 2 .
On the other hand, let us put x 3 = ( 1 , 0 ) and y 3 = ( 0 , 1 ) , then
x 3 φ = y 3 φ = 1 ,
x 3 + y 3 φ = x 3 y 3 φ = 2 φ 1 2 ,
c NJ ( p ) ( · φ ) x 3 + y 3 φ p + x 3 y 3 φ p 2 p = 2 p + 1 φ p ( 1 2 ) 2 p = 2 φ p 1 2 .
By the inequalities (5) and (6), we can obtain that
c NJ ( p ) ( · φ ) = 1 M 2 p c NJ ( p ) ( · μ ) = 2 φ p 1 2 .
We end the proof. □
 Theorem 5.
Let φ ( t ) Ψ and φ ( t ) φ p ( t ) ( 2 p < ), if the maximum M 2 = max 0 t 1 φ p ( t ) φ ( t ) attains at t = 1 2 , then
c NJ ( p ) ( · φ ) = 2 2 p M 2 p .
 Proof. 
Let x , y S X , from the condition of φ ( t ) φ p ( t ) ( 2 p < ) for all t [ 0 , 1 ] , and the Clarkson inequality in [22], we have
x + y φ p + x y φ p 1 M 2 p ( x + y p p + x y p p ) 2 M 2 p ( x p p + y p p ) 2 M 2 p ( x φ p + y φ p ) = 2 2 M 2 p ,
which implies that
c NJ ( p ) ( · φ ) 2 2 p M 2 p .
On the other hand, since M 2 = φ p ( 1 2 ) φ ( 1 2 ) , let us put x 4 = ( 1 2 , 0 ) and y 4 = ( 0 , 1 2 ) , then
x 4 φ p = y 4 φ p = 1 2 p ,
x 4 + y 4 φ = x 4 y 4 φ = φ 1 2 ,
c NJ ( p ) ( · φ ) x 4 + y 4 φ p + x 4 y 4 ψ p 2 p min ( x 4 φ p , y 4 φ p ) = 2 2 p φ p ( 1 2 ) φ p p ( 1 2 ) = 2 2 p M 2 p .
From inequalities (7) and (8), we infer that
c NJ ( p ) ( · φ ) = 2 2 p M 2 p .
We obtain the desired result. □
In the following, let us state the conclusion about the general mean m ( t ) .
 Corollary 1.
Let ω ( t ) μ ( t ) Φ for all t [ 0 , 1 ] , m ( t ) : = m ( ω ( t ) , μ ( t ) ) is the mean convex function of the functions ω ( t ) and μ ( t ) .
(i)
If m ( t ) ω ( t ) attains its maximum at t = 1 2 and c NJ ( p ) ( · ω ) = 1 2 p 1 ω p ( 1 2 ) , then
c NJ ( p ) ( · m ) = 1 2 p 1 m p ( 1 2 ) .
(ii)
If μ ( t ) m ( t ) attains its maximum at t = 1 2 and c NJ ( p ) ( · μ ) = 2 μ p ( 1 2 ) , then
c NJ ( p ) ( · m ) = 2 m p 1 2 .
 Proof. 
It is well known that
ω ( t ) m ( t ) μ ( t )
for all t [ 0 , 1 ] . It is easy to check that m ( t ) Φ . Since the function m ( t ) is convex, we can obtain the result from Theorem 2 and Theorem 4, respectively. □
Next, we give the lower bound and upper bound of the constant c NJ ( p ) ( · φ ) for the general case φ ( t ) Φ .
 Theorem 6.
Let φ ( t ) Φ for t [ 0 , 1 ] , M 1 = max 0 t 1 φ ( t ) φ p ( t ) , M 2 = max 0 t 1 φ p ( t ) φ ( t ) .
(i)
If 1 < p 2 , then
1 ( M 1 M 2 ) p c NJ ( p ) · φ 1 M 1 p ,
(ii)
If 2 < p < , then
2 2 p ( M 1 M 2 ) p c NJ ( p ) · φ 2 2 p M 2 p .
 Proof.
(i) If 1 p 2 , it is easy to obtain the right inequality from (4), then
c NJ ( p ) · φ 1 M 1 p .
Let x , y S X . By the definition of M 1 , M 2 , and the Clarkson inequality, we have
x + y φ p + x y ψ p 1 M 2 p ( x + y p p + x y p p ) 2 p 1 M 2 p ( x p p + y p p ) 2 p 1 ( M 1 M 2 ) p ( x φ p + y φ p ) = 2 p ( M 1 M 2 ) p .
The inequality implies that
c NJ ( p ) ( · φ ) 1 ( M 1 M 2 ) p .
(ii) Let 2 < p . The right inequality is obvious from inequality (8), then
c NJ ( p ) · φ 2 2 p M 2 p .
Let x , y S X . From the Clarkson inequality, we can obtain
x + y φ p + x y φ p 1 M 2 p ( x + y p p + x y p p ) 2 M 2 p ( x p p + y p p ) 2 ( M 1 M 2 ) p ( x φ p + y φ p ) = 2 2 ( M 1 M 2 ) p
The definition of c NJ ( p ) ( · φ ) implies that the left inequality is as follows:
c NJ ( p ) · φ 2 2 p ( M 1 M 2 ) p .
We complete the proof. □
From Theorem 3 and Theorem 5, the Gao-type constant c NJ ( p ) ( · φ ) coincides with the upper bound. In the following, we only give some conditions under which the Gao constant c NJ ( · φ ) coincides with the lower bound.
 Theorem 7.
Let φ ( t ) = φ ( 1 t ) for all t [ 0 , 1 ] . If there exist two points t 1 , t 2 [ 0 , 1 2 ] , such that
M 1 = φ ( t 1 ) φ 2 ( t 1 ) , M 2 = φ 2 ( t 2 ) φ ( t 2 ) a n d ( 1 t 1 ) ( 1 t 2 ) = 1 2 ,
then
c NJ ( · φ ) = 1 ( M 1 M 2 ) 2 .
 Proof. 
Firstly, take α = 1 M 1 and β = M 2 in Theorem 1. Since c NJ ( · 2 ) = 1 , then
c NJ ( · φ ) c NJ ( · 2 ) 1 ( M 1 M 2 ) 2 = 1 ( M 1 M 2 ) 2 .
Secondly, note that ( 1 t 1 ) ( 1 t 2 ) = 1 2 . Put x = 1 φ ( t 1 ) ( 1 t 1 , t 1 ) , y = 1 φ ( t 1 ) ( t 1 , t 1 1 ) , then
x φ = 1 , y φ = 1 .
From the conditions that φ ( t ) = φ ( 1 t ) and ( 1 t 1 ) ( 1 t 2 ) = 1 2 , we have
x + y φ = ( 2 2 t 1 ) φ ( t 1 ) φ 1 2 t 1 2 2 t 1 = ( 2 2 t 1 ) φ ( t 2 ) φ ( t 1 ) ,
x y φ = ( 2 2 t 1 ) φ ( t 1 ) φ 1 2 2 t 1 = ( 2 2 t 1 ) φ ( t 2 ) φ ( t 1 ) .
It is well known that
φ 2 ( t ) = 2 ( 1 t ) φ 2 1 2 2 t ,
then
φ 2 2 ( t 1 ) = 2 ( 1 t 1 ) 2 φ 2 2 1 2 2 t 1 = 2 ( 1 t 1 ) 2 φ 2 2 ( t 2 ) .
Consequently, we obtain
c NJ ( · φ ) x + y φ 2 + x y φ 2 4 = 2 ( 1 t 1 ) 2 φ 2 ( t 2 ) φ 2 ( t 1 ) = 1 ( M 1 M 2 ) 2 · 2 ( 1 t 1 ) 2 φ 2 2 ( t 2 ) φ 2 2 ( t 1 ) = 1 ( M 1 M 2 ) 2 .
From inequalities (9) and (10), we infer that
c NJ ( · φ ) = 1 ( M 1 M 2 ) 2 .
Thus, the claim holds. □

4. Some Examples

In this section, we compute the values of the Gao-type constant c NJ ( p ) ( X ) on some specific spaces. We give the exact value of the Gao-type constant c NJ ( p ) ( X ) under the absolute normalized norms in R 2 , and provide examples to show that the value of the Gao-type constant cannot characterize the inner product space in a general case.
 Example 1.
For the usual p 2 space, then
c NJ ( p ) ( · p ) = 1 , 1 < p 2 , 2 2 p , 2 < p < .
In particular, c NJ ( p ) ( · 1 ) = c NJ ( p ) ( · ) = 2 1 p .
 Proof. 
Let 1 < p 2 and x , y S X . From the Clarkson inequality, we have
( x + y p p + x y p p ) 2 p 1 ( x p p + y p p ) ,
which means that
c NJ ( p ) ( · p ) 1 .
Let us put x = ( 1 2 , 1 2 ) and y = ( 1 2 , 1 2 ) , then
x + y p p + x y p p 2 p min ( x p p , y p p ) = 1 .
From inequalities (11) and (12), we can obtain
c NJ ( p ) ( · p ) = 1 .
Let 2 < p < and x , y S X . From the Clarkson inequality, we obtain
( x + y p p + x y p p ) 2 ( x p p + y p p ) ,
then
c NJ ( p ) ( · p ) 2 2 p .
Taking x = ( 1 , 0 ) , y = ( 0 , 1 ) , then
x + y p p + x y p p 2 p min ( x p p , y p p ) 2 2 p .
The definition of c NJ ( p ) ( · p ) from (13) and (14) implies that
c NJ ( p ) ( · p ) = 2 2 p .
Since · 1 · p ( 1 < p 2 ) , it is well known that φ 1 ( t ) φ p ( t ) = 1 [ ( 1 t ) p + t p ] 1 p attains the maximum at t = 1 2 , then
M 1 = max 0 t 1 φ 1 ( t ) φ p ( t ) = 2 1 1 p .
By Theorem 3, we obtain
c NJ ( p ) ( · 1 ) = 2 1 p .
It is well known that · · p ( 2 p ) and
φ ( t ) = 1 t , 0 t 1 2 , t , 1 2 < t < 1 .
(i)
Let 0 t 1 2 , φ p ( t ) φ ( t ) = ( ( 1 t ) p + t p ) 1 p 1 t = l ( t ) , then l ( t ) > 0 and M 2 = l ( 1 2 ) = 2 1 p .
(ii)
Let 1 2 t 1 , φ p ( t ) φ ( t ) = ( ( 1 t ) p + t p ) 1 p t = m ( t ) , then m ( t ) < 0 and M 2 = m ( 1 2 ) = 2 1 p .
Therefore, by Theorem 5, we have c NJ ( p ) ( · ) = 2 2 p M 2 p = 2 1 p . □
 Remark 1.
(i)
Since the Gao-type constant has two-dimensional characters and the concept of an absolute normalized norm concerns spaces with bases, we can first consider the examples as norms in R 2 , from Proposition 3 and Example 1, we have
c NJ ( p ) ( p ) = 1 , 1 < p 2 , 2 2 p , 2 < p < .
This method can be helpful for us to deal with the values of c NJ ( p ) ( X ) for the general spaces X.
(ii)
Since c NJ ( p ) ( p ) = 1 for any 1 < p 2 ; therefore, the exact value of the Gao-type constant c NJ ( p ) ( X ) cannot characterize the inner product space in a general case.
 Example 2.
Let X p , q , μ be the space R 2 with the norm
· p , q , μ = max { · p , μ · q } ,
where μ [ 2 1 p 1 q , 1 ] and 1 q p , then
c NJ ( p ) ( · p , q , μ ) = 2 1 p q μ p , i f 1 q < p 2 , μ p 2 p q p + 1 , i f 2 q < p .
 Proof. 
Firstly, the norm · p , q , μ = max { · p , μ · q } N α 2 , the corresponding function is
φ ( t ) = ( 1 t , t ) p , q , μ = max { φ p ( t ) , μ φ q ( t ) } .
In fact, since φ ( t ) is symmetric with respect to t = 1 2 , we can only consider the function φ ( t ) on the interval [ 0 , 1 2 ] . Let t 0 [ 0 , 1 2 ] be a point such that φ p ( t 0 ) = μ φ q ( t 0 ) , then
φ ( t ) = φ p ( t ) , t [ 0 , t 0 ] , μ φ q ( t ) , t [ t 0 , 1 2 ] .
(i)
Let 1 q < p 2 , since φ ( t ) φ p ( t ) and the function
φ ( t ) φ p ( t ) = 1 , t [ 0 , t 0 ] [ 1 t 0 , 1 ] , μ φ q ( t ) φ p ( t ) , t [ t 0 , 1 t 0 ]
attains the maximum at t = 1 2 . By Theorem 3, we obtain
c NJ ( p ) ( · p , q , μ ) = 1 M 1 p = 2 1 p q μ p .
(ii)
Let 2 q < p . Since for any t [ 0 , 1 ] , φ p ( t ) φ q ( t ) and μ φ q ( t ) φ q ( t ) , then φ ( t ) φ q ( t ) , and the function
φ q ( t ) φ ( t ) = φ q ( t ) φ p ( t ) , t [ 0 , t 0 ] [ 1 t 0 , 1 ] , 1 μ , t [ t 0 , 1 t 0 ]
also attains the maximum at t = 1 2 . By Theorem 5, we obtain
c NJ ( p ) ( · p , q , μ ) = 2 2 p M 2 p = μ p 2 p q p + 1 .
This completes the process. □
 Example 3.
Let 1 p < q , 1 k < and μ > 0 be constants. The Banach space Z μ , p , q , k and its corresponding norm is
· μ , p , q , k = ( 1 + μ ) 1 k ( · p k + μ · q k ) 1 k .
Therefore, the corresponding function φ μ , p , q , k ( t ) is defined by
φ μ , p , q , k ( t ) = ( 1 + μ ) 1 k ( φ p k ( t ) + μ φ q k ( t ) ) 1 k ,
then
c NJ ( p ) ( · μ , p , q , k ) = 2 ( 1 + μ ) p k ( 2 k q + μ 2 k q ) p k , i f 1 p < q 2 , 2 ( 1 + μ ) p k ( 2 k p + μ 2 k q ) p k , i f 2 p < q .
 Proof. 
Since φ μ , p , q , k ( t ) is the weighted mean of order k of the functions φ p ( t ) and φ q ( t ) , then
φ q ( t ) φ μ , p , q , k ( t ) φ p ( t ) .
(i)
If 1 p < q 2 , then by the simple calculations, φ μ , p , q , k ( t ) φ q ( t ) and the function φ μ , p , q , k ( t ) φ q ( t ) attains the maximum at t = 1 2 . Take ω ( t ) = φ q ( t ) and μ ( t ) = φ p ( t ) in Corollary 1 (i), then
c NJ ( p ) ( · μ , p , q , k ) = 1 2 p 1 φ μ , p , q , k p ( 1 2 ) = 2 ( 1 + μ ) p k ( 2 k q + μ 2 k q ) p k .
(ii)
If 2 p < q , then φ μ , p , q , k ( t ) φ p ( t ) and the function φ p ( t ) φ μ , p , q , k ( t ) attains its maximum at t = 1 2 . Similarly, take ω ( t ) = φ q ( t ) and μ ( t ) = φ p ( t ) in Corollary 1 (ii), then
c NJ ( p ) ( · μ , p , q , k ) = 2 φ μ , p , q , k p ( 1 2 ) = 2 ( 1 + μ ) p k ( 2 k p + μ 2 k q ) p k .
We obtain the desired result. □
 Remark 2.
(i)
In fact, take p = 2 , q = 1 or p 2 , q = in Example 2, the Gao constant c NJ ( X ) was calculated in [17,23,24]. Now, Example 2 calculates the values of the constant c NJ ( p ) ( · p , q , μ ) for the general case μ [ 2 1 p 1 q , 1 ] and 1 q p .
(ii)
In fact, the concrete Banach space Z μ , 2 , , k in Example 3 was studied in some papers (see [24,25,26]. However, the exact value of c NJ ( p ) ( · μ , p , q , k ) for the general case remains undiscovered. Example 3 gives the value of the constant c NJ ( p ) ( · μ , p , q , k ) for the general case μ > 0 , 1 p < q and 1 k < .
From Examples 1, 2, 3, the maximum value M 1 is always attained at t = 1 2 . However, we give some examples to show that M 1 does not attain at t = 1 2 .
 Example 4.
Let 1 < q 2 and the function be defined by
φ ( t ) = φ q ( t ) , if 0 t 1 2 , ( 2 2 ) t + 2 1 , if 1 2 t 1 ,
then
c NJ ( p ) ( · φ ) = max 1 2 < t 1 φ q p ( t ) φ p ( t ) .
 Proof. 
It is obvious that φ ( t ) Φ , and the norm of φ ( t ) is
( x , y ) φ = ( | x | q + | y | q ) 1 q ( | x | | y | ) , ( 2 1 ) | x | + | y | ( | x | | y | ) .
Since φ ( t ) φ q ( t ) , then from Theorem 3, it follows that
c NJ ( p ) ( · φ ) = 1 M 1 p = max 0 t 1 φ q p ( t ) φ p ( t ) = max 1 2 < t 1 φ q p ( t ) φ p ( t ) .
This proof is completed. □
 Example 5.
If 1 < q 2 and c e s q ( 2 ) be two-dimensional Cesàro space, then
c NJ ( p ) ( c e s q ( 2 ) ) = max 0 t 1 φ 2 p ( t ) φ p ( t ) ,
where
φ ( t ) = 2 q ( 1 t ) q 1 + 2 q + 1 t ( 1 + 2 q ) 1 / q + t q 1 q .
 Proof. 
Firstly, we define a norm
| x , y | = 2 x ( 1 + 2 q ) 1 q , 2 y c e s q ( 2 )
for all ( x , y ) R 2 . Obviously, ( R 2 , | · | ) is the absolute and normalized norm space, the corresponding convex function is as
φ ( t ) = 2 q ( 1 t ) q 1 + 2 q + 1 t ( 1 + 2 q ) 1 / q + t q 1 q .
It has been proved that c e s q ( 2 ) is isometrically isomorphic to ( R 2 , | · | ) . Note that
1 t ( 1 + 2 q ) 1 / q + t q ( 1 t ) q 1 + 2 q + t q .
Consequently, φ ( t ) φ q ( t ) ( 1 < q 2 ). By using Theorem 3, we obtain
c NJ ( p ) ( · φ ) = 1 M 1 p = max 0 t 1 φ q p ( t ) φ p ( t ) .
The proof is completed. □
 Remark 3.
(i)
In particular, take q = 2 in Example 4, some classical constants were calculated in [15,20]. Now, we obtain
c NJ ( p ) ( · φ ) = max 1 2 < t 1 φ 2 p ( t ) φ p ( t ) = φ 2 p ( 2 2 ) φ p ( 2 2 ) = 1 ( 4 2 2 ) p 2 .
Moreover, Example 4 gives the exact value of the Gao-type constant c NJ ( p ) ( · φ ) for the general case 1 < q 2 .
(ii)
In Example 5, the function φ q ( t ) φ ( t ) attains the maximum M 1 at t = 1 2 if and only if q = 2 for the Cesàro space c e s q ( 2 ) .
 Example 6.
The Lorentz sequence space l ( 2 ) ( ω , r ) is R 2 with the norm:
( x , y ) ω , r = ( ( x ) r + ω ( y ) r ) 1 r ,
where 0 < ω < 1 and 2 r < , ( x , y ) is the rearrangement of ( | x | , | y | ) satisfying x y , then
c NJ ( p ) ( · ω , r ) = 2 1 p ( 1 + ω ) p r .
 Proof. 
The norm ( x , y ) ω , r is absolute and normalized on R 2 , and the corresponding convex function is as
φ ω , r ( t ) = ( ( 1 t ) r + ω t r ) 1 r , 0 t 1 2 , ( t r + ω ( 1 t ) r ) 1 r , 1 2 t 1 .
Since 0 < ω < 1 , it is obvious that φ ω , r ( t ) φ r ( t ) . We can only consider φ r ( t ) φ ω , r ( t ) for t [ 0 , 1 2 ] , in which the function is symmetric with respect to t = 1 2 . For any t [ 0 , 1 2 ] , let h ( t ) = φ r r ( t ) φ ω , r r ( t ) , then
h ( t ) = r ( 1 ω ) [ t ( 1 t ) ] r 1 [ ( 1 t ) r + ω t r ] 2 ,
therefore, h ( t ) 0 for 0 t 1 2 , and the function φ r ( t ) φ ω , r ( t ) attains its maximum at t = 1 2 . By Theorem 5, then
c NJ ( p ) ( · ω , r ) = 2 2 p M 2 p = 2 1 p ( 1 + ω ) p r .
We gain the conclusion. □
 Example 7.
Let 2 p < and V p be the space R 2 with the norm:
( x 1 , x 2 ) V p = max | x 1 2 | p + | x 2 | p 1 p , | x 1 | p + | x 2 2 | p 1 p ,
then
c NJ ( p ) ( V p ) = 2 2 p M 2 p = 2 1 p ( 1 + 2 p ) .
 Proof. 
Firstly, the norm ( x 1 , x 2 ) V p is absolute and normalized on R 2 , and the corresponding convex function is
φ V p ( t ) = ( t 2 ) p + ( 1 t ) p 1 p , 0 t 1 2 , t p + ( 1 t 2 ) p 1 p , 1 2 t 1 .
It is obvious that φ V p ( t ) φ p ( t ) , and we can consider φ p p ( t ) φ V p p ( t ) for t [ 0 , 1 2 ] . The function φ p p ( t ) φ V p p ( t ) = ( 1 1 2 p ) t p attains the maximum at t = 1 2 and φ V p ( t ) attains its minimum at t = 1 2 . By Lemma 1, we obtain that function φ p ( t ) φ V p ( t ) attains the maximum at t = 1 2 ; hence, it follows immediately from Theorem 5 that
c NJ ( p ) ( V p ) = 2 2 p M 2 p = 2 1 p ( 1 + 2 p ) .
We complete the proof. □
We can discuss something similar, such as in Example 7, and obtain Example 8 as follows.
 Example 8.
Let Y p ( 2 p < ) be the space R 2 endowed with the norm:
( x 1 , x 2 ) Y p = max | x 1 | p 2 + | x 2 | p 1 p , | x 1 | p + | x 2 | p 2 1 p ,
then
c NJ ( p ) ( Y p ) = 2 2 p φ Y p p ( 1 2 ) φ p p ( 1 2 ) = 3 2 p ,
in which the corresponding convex function φ Y p ( t ) has the form:
φ Y p ( t ) = t p 2 + ( 1 t ) p 1 p , 0 t 1 2 , t p + ( 1 t ) p 2 1 p , 1 2 t 1 .
 Remark 4.
(i)
Taking r = 2 and ω = 2 2 p 1 ( 0 , 1 ) ( 2 p < ) in Example 6, we obtain the Lorentz sequence space l p , 2 , which were studied in [20,23,27], and the exact value of Gao’s constant c NJ ( X ) was given in [17]. Now, we obtain the exact value of the Gao-type constant c NJ ( p ) ( l ( 2 ) ( ω , r ) ) for the general case 0 < ω < 1 and 2 r < in Example 6.
(ii)
The Banach spaces V 2 and Y 2 were studied widely in [24,28], where some classical constants were calculated. Now, the values of c NJ ( p ) ( X ) are calculated for the general Banach spaces V p , Y p in Examples 7 and 8 by Theorem 5.
Finally, we present a practical example that satisfies the conditions of Theorem 7; thus, the exact value of Gao’s constant c NJ ( X ) coincides with the lower bound 1 ( M 1 M 2 ) 2 .
 Example 9.
Let 3 1 < a 1 . The corresponding convex function is given by
φ a ( t ) = max { 1 a t , 1 a + a t , 1 a 2 2 } f o r 0 t 1 ,
then
c NJ ( · φ a ) = 2 a 2 2 ( a 2 2 a + 2 ) 2 .
 Proof. 
It is easy to check that φ a ( t ) Φ and φ a ( t ) = φ a ( 1 t ) for all t [ 0 , 1 ] . If 3 1 < a 1 , simple calculations show that
M 1 = φ a ( t 2 ) φ 2 ( t 2 ) = a 2 2 a + 2 , M 2 = φ 2 ( t 1 ) φ a ( t 1 ) = 2 ( a 2 2 a + 2 ) ( 2 a 2 ) ,
where t 1 = a 2 , t 2 = 1 a 2 a satisfy the condition ( 1 t 1 ) ( 1 t 2 ) = 1 2 in Theorem 7. Then we have
c NJ ( · φ a ) = 1 ( M 1 M 2 ) 2 = 2 a 2 2 ( a 2 2 a + 2 ) 2 .
Therefore, we finish the proof. □

5. Conclusions

In this paper, we present a general method to calculate the Gao-type constant c NJ ( p ) ( X ) for some Banach spaces with the absolute normalized norms, which can help us compute the values of the Gao-type constant on some new specific spaces. Furthermore, we also present an example to show that the value of the Gao-type constant cannot characterize the inner product space in a general case. However, some problems remain unsolved, i.e., the precise lower bound and upper bound of the constant c NJ ( p ) ( · φ ) for the general case φ ( t ) Φ . The values of the Gao-type constant c NJ ( p ) ( X ) on some specific spaces are not yet known, such as the Banach space Z μ , p , q , k in the case of 1 p k 2 < q , the Lorentz sequence space l ( 2 ) ( ω , r ) for the case 1 r < 2 , etc. We will investigate these questions in the future.

Author Contributions

Z.Z. designed the research and wrote the paper. Y.H. and H.H. conducted the draft preparation and methodology. J.W. co-wrote and revised the paper. Z.Z. provided support with the funding acquisition. All authors have read and agreed to the published version of the manuscript.

Funding

The work was sponsored by the Natural Science Foundation of Chongqing (CSTB2022NSCQ-MSX0290, cstc2020jcyj-msxmX0762), the Scientific and Technological Research Program of Chongqing Municipal Education Commission (grant no. KJZD-M202001201), China. The research was partially supported by the Talent Initial Funding for Scientific Research of Chongqing Three Gorges University (20190020).

Institutional Review Board Statement

Not applicable.

Informed Consent Statement

Not applicable.

Data Availability Statement

The data presented in this study are available upon request from the corresponding author.

Acknowledgments

The authors thank the editor and the reviewers for their valuable comments and suggestions, which improved greatly the quality of this paper.

Conflicts of Interest

The authors declare no conflict of interest.

References

  1. Yang, C.; Wang, F. An extension of a simply inequality between von Neumann-Jordan and James Constants in Banach Spaces. Acta Math. Sin. 2017, 33, 1287–1396. [Google Scholar] [CrossRef]
  2. Yang, C.; Wang, T. On the generalized von Neumann-Jordan constant C NJ ( p ) (X). J. Comput. Anal. Appl. 2017, 23, 860–866. [Google Scholar]
  3. Gao, J. WUR modulus and normal structure in Banach spaces. Adv. Operator Theory 2018, 3, 639–646. [Google Scholar] [CrossRef]
  4. Dinarvand, M. Hölder’s means and fixed points for multivalued nonexpansive mappings. Filomat 2018, 19, 6531–6547. [Google Scholar] [CrossRef] [Green Version]
  5. Amini-Harandi, A.; Rahimi, M. On some geometric constants in Banach spaces. Mediterranean J. Math. 2019, 16, 1–20. [Google Scholar] [CrossRef]
  6. Gao, J. Research on normal structure in a Banach space via some parameters in its dual space. Commun. Korean Math. Soc. 2019, 34, 465–475. [Google Scholar]
  7. Dinarvand, M. Heinz means and triangles inscribed in a semicircle in Banach spaces. Math. Inequal. Appl. 2019, 22, 275–290. [Google Scholar] [CrossRef] [Green Version]
  8. Mitani, I.; Saito, S. A note on relations between skewness and geometrical constants of Banach spaces. Linear Nonlinear Anal. 2021, 7, 257–264. [Google Scholar]
  9. Gao, J. A pythagorean approach in Banach spaces. J. Inequal. Appl. 2006, 2006, 94982. [Google Scholar] [CrossRef] [Green Version]
  10. Tanaka, R. Tingley’s problem on symmetric absolute normalized norms on R2. Acta Math. Sin. (Engl. Ser.) 2014, 30, 1324–1340. [Google Scholar] [CrossRef]
  11. Tingley, D. Isometries of the unit sphere. Geom. Dedicata 1987, 22, 371–378. [Google Scholar] [CrossRef]
  12. Takahashi, Y. Some geometric constants of Banach spaces—A unified approach. In Banach and Function Spaces II; Yokohama Publisher: Yokohama, Japan, 2007. [Google Scholar]
  13. Zuo, Z.; Cui, Y. Some modulus and normal structure in Banach space. J. Inequal. Appl. 2009, 2009, 676373. [Google Scholar] [CrossRef] [Green Version]
  14. Wang, F.; Yang, C. An inequality between the James and James type constants in Banach spaces. Stud. Math. 2010, 201, 191–201. [Google Scholar] [CrossRef]
  15. Zuo, Z.; Tang, C. Schäffer-type constant and uniform normal structure in Banach spaces. Ann. Funct. Anal. 2016, 3, 452–461. [Google Scholar] [CrossRef]
  16. Asif, A.; Xie, H.Y.; Bi, J.Y.; Li, Y.J. Some von Neumann-Jordan type and Gao type constants related to minimum in Banach Spaces. Res. Commun. Math. Math. Sci. 2022, in press.
  17. Cui, H.; Wang, F. Gao’s constants of Lorentz sequence spaces. Soochow J. Math. 2007, 3, 707–717. [Google Scholar]
  18. Cui, Y.; Huang, W.; Hudzik, H. Generalized von Neumann-Jordan constant and its relationship to the fixed point property. Fixed Point Theory Appl. 2015, 2015, 40. [Google Scholar] [CrossRef] [Green Version]
  19. Bonsall, F.; Duncan, J. Numerical Ranges II; London Mathematical Society Lecture Notes Series, 10; Cambridge University Press: New York, NY, USA, 1973. [Google Scholar]
  20. Saito, K.; Kato, M.; Takahashi, Y. Von Neumann-Jordan constant of absolute normalized norms on C2. J. Math. Anal. Appl. 2000, 244, 515–532. [Google Scholar] [CrossRef] [Green Version]
  21. Baronti, M.; Casini, E.; Papini P., L. Triangles inscribed in a semicircle, in Minkowski plane, and in normed spaces. J. Math. Anal. Appl. 2000, 252, 121–146. [Google Scholar] [CrossRef] [Green Version]
  22. Clarkson, J. Uniformly convex spaces. Trans. Am. Math. Soc. 1936, 40, 396–414. [Google Scholar] [CrossRef]
  23. Kato, M.; Maligranda, L.; Takahashi, Y. On James and Jordan-von Neumann constants and normal structure coefficient of Banach spaces. Stud. Math. 2001, 144, 275–295. [Google Scholar] [CrossRef] [Green Version]
  24. Alonso, J.; Llorens-Fuster, E. Geometric mean and triangles inscribed in a semicircle in Banach spaces. J. Math. Anal. Appl. 2008, 340, 1271–1283. [Google Scholar] [CrossRef] [Green Version]
  25. Yang, C.; Li, H. An inequality between Jordan-von Neumann constant and James constant. Appl. Math. Lett. 2010, 23, 277–281. [Google Scholar] [CrossRef] [Green Version]
  26. Yang, C. A note on Jordan-Von Neumann constant for Zp,q space. J. Math. Inequal. 2015, 2, 499–504. [Google Scholar] [CrossRef]
  27. Kato, M.; Maligranda, L. On James and von Neumann-Jordan constants of Lorentz sequence spaces. J. Math. Anal. Appl. 2001, 258, 457–465. [Google Scholar] [CrossRef]
  28. Llorens-Fuster, E.; Mazcuñán-Navarro, E.; Reich, S. The Ptolemy and Zbăganu constants of normed spaces. Nonlinear Anal. 2010, 72, 3984–3993. [Google Scholar] [CrossRef]
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Share and Cite

MDPI and ACS Style

Zuo, Z.; Huang, Y.; Huang, H.; Wang, J. The Gao-Type Constant of Absolute Normalized Norms on ℝ2. Mathematics 2022, 10, 4591. https://doi.org/10.3390/math10234591

AMA Style

Zuo Z, Huang Y, Huang H, Wang J. The Gao-Type Constant of Absolute Normalized Norms on ℝ2. Mathematics. 2022; 10(23):4591. https://doi.org/10.3390/math10234591

Chicago/Turabian Style

Zuo, Zhanfei, Yimin Huang, Huaping Huang, and Jing Wang. 2022. "The Gao-Type Constant of Absolute Normalized Norms on ℝ2" Mathematics 10, no. 23: 4591. https://doi.org/10.3390/math10234591

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop