Enhancing the Stability of Fungal Lipases by Immobilization onto Accurel MP 1000 Support and Additional Glutaraldehyde Crosslinking

Commercial fungal lipases from Rhizopus oryzae, Rhizopus niveus, Aspergillus niger, Rhizomucor miehei, and Candida rugosa were immobilized via physical adsorption onto Accurel MP 1000, a hydrophobic polypropylene support. The effects of enzyme concentration, pH, temperature, and glutaraldehyde post-treatment were systematically evaluated. Immobilization generally enhanced enzyme stability, which was further improved in several cases by glutaraldehyde crosslinking. The immobilized preparations retained over 50% of their initial activity for 3–6 cycles, and 7–10 cycles following glutaraldehyde treatment. While soluble enzymes lost nearly all activity within three months at 5 °C and 25 °C and retained only 5–20% at −20 °C, the immobilized forms preserved 50–100% of their activity under all storage conditions tested. Immobilized lipases also exhibited improved thermal stability at 60 °C by general increments between 1.3 and 1.8 times compared to soluble lipases. Increased tolerance to pH fluctuations was observed in most immobilized enzymes, particularly from R. oryzae, R. niveus, R. miehei, and C. rugosa. Organic solvent tolerance of the immobilized enzymes showed highest stability in hexane (66–100% residual activity after 4 h incubation). Glutaraldehyde treatment affected solvent stability of immobilized lipases in enzyme and solvent dependent manner. These findings demonstrate the improved stability and applicability of the produced biocatalysts in varying reaction environments.