Scientia Pharmaceutica is published by MDPI from Volume 84 Issue 3 (2016).
Articles in this Issue were published by another publisher in Open Access under a CC-BY (or CC-BY-NC-ND) licence.
Articles are hosted by MDPI on mdpi.com as a courtesy and upon agreement with Austrian Pharmaceutical Society (Österreichische Pharmazeutische Gesellschaft, ÖPhG).
Sci. Pharm. 2010, 78(3), 583; https://doi.org/10.3797/scipharm.cespt.8.LPPT03 (registering DOI)
Development of Modified Release Pellets via Dry Powder Coating
1
Institute of Pharmaceutics and Biopharmaceutics, Heinrich-Heine-University, Duesseldorf, Germany
2
Research Center Pharmaceutical Engineering, Graz University of Technology, Graz, Austria
*
Author to whom correspondence should be addressed.
Received: 12 July 2010 / Accepted: 12 July 2010 / Published: 12 July 2010
PDF [104 KB, uploaded 9 October 2016]
Abstract
Dry powder coating is a relatively new technique to coat substrates without the use of any organic solvent or water. [...]
This is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited (CC BY 4.0).
Share & Cite This Article
MDPI and ACS Style
SMIKALLA, M.; URBANETZ, N.A. Development of Modified Release Pellets via Dry Powder Coating. Sci. Pharm. 2010, 78, 583.
Article Metrics
Comments
[Return to top]
Sci. Pharm.
EISSN 2218-0532
Published by MDPI AG, Basel, Switzerland
RSS
E-Mail Table of Contents Alert