Next Article in Journal
Performance of Concrete Confined with a Jute–Polyester Hybrid Fiber Reinforced Polymer Composite: A Novel Strengthening Technique
Previous Article in Journal
A New Method for Measuring Fabric Drape with a Novel Parameter for Classifying Fabrics
Open AccessArticle

YAP-Based Fibers Obtained by Internal Crystallization Method

Institute of Solid State Physics of Russian Academy of Sciences, 142432 Moscow, Russia
*
Author to whom correspondence should be addressed.
Fibers 2019, 7(8), 71; https://doi.org/10.3390/fib7080071
Received: 1 June 2019 / Revised: 6 July 2019 / Accepted: 20 July 2019 / Published: 28 July 2019
Two new types of oxide fibers, namely, those of single crystalline yttrium-aluminum perovskite YAlO3 (YAP) and two-phase YAlO3-Y4Al2O9 (YAP-YAM), have been grown by the internal crystallization method. The fibers of the second type retain their strength at temperatures up to 1000 °C. Their effective strength in a molybdenum matrix reaches about 600 MPa at a temperature of 1400 °C. View Full-Text
Keywords: oxide fiber; yttrium-aluminum perovskite (YAP); internal crystallization method; microstructure; strength oxide fiber; yttrium-aluminum perovskite (YAP); internal crystallization method; microstructure; strength
Show Figures

Figure 1

MDPI and ACS Style

Mileiko, S.; Kolchin, A.; Shakhlevich, O.; Prokopenko, N.; Galyshev, S. YAP-Based Fibers Obtained by Internal Crystallization Method. Fibers 2019, 7, 71.

Show more citation formats Show less citations formats
Note that from the first issue of 2016, MDPI journals use article numbers instead of page numbers. See further details here.

Article Access Map by Country/Region

1
Back to TopTop