Influence of LBE Temperatures on the Microstructure and Properties of Crystalline and Amorphous Multiphase Ceramic Coatings
Abstract
:1. Introduction
2. Experimental
3. Results and Discussion
4. Conclusions
Author Contributions
Funding
Conflicts of Interest
References
- Nema, P. Application of accelerators for nuclear systems: Accelerator driven system (ADS). Energy Procedia 2011, 7, 597–608. [Google Scholar] [CrossRef]
- Zhang, J. A review of steel corrosion by liquid lead and lead-bismuth. Corros. Sci. 2009, 51, 1207–1227. [Google Scholar] [CrossRef]
- Kurata, Y.; Yokota, H.; Suzuki, T. Development of aluminum alloy coating on type 316SS for nuclear systems using liquid lead-bismuth. J. Nucl. Mater. 2012, 424, 237–246. [Google Scholar] [CrossRef]
- Fiori, F.; Zhou, Z. Sustainability of the Chinese nuclear expansion: The role of ADS to close the nuclear fuel cycle. Prog. Nucl. Energy 2015, 83, 123–134. [Google Scholar] [CrossRef]
- Li, X.; Chu, H.; Chen, Y.; Peng, H.; Wang, G.; Wei, Q.; Chen, J.; Wu, Y.; Zhou, W. Microstructure and properties of the laser cladding ODS layers on CLAM steel. Surf. Coat. Technol. 2019, 357, 172–179. [Google Scholar] [CrossRef]
- Tang, W.; Yang, X.; Li, S.; Li, H. Microstructure and properties of CLAM/316L steel friction stir welded joints. J. Mater. Process. Technol. 2019, 271, 189–201. [Google Scholar] [CrossRef]
- Huang, Q. Development status of CLAM steel for fusion application. J. Nucl. Mater. 2014, 455, 649–654. [Google Scholar] [CrossRef]
- Zhao, Y.; Zhai, X.; Liu, S. Low cycle fatigue properties of CLAM steel at 450 °C and 550 °C. Fusion Eng. Des. 2016, 112, 213–217. [Google Scholar] [CrossRef]
- Zhao, Y.; Liang, M.; Zhang, Z.; Jiang, M.; Liu, S. Fracture toughness and fracture behavior of CLAM steel in the temperature range of 450 °C–550 °C. J. Nucl. Mater. 2018, 501, 200–207. [Google Scholar] [CrossRef]
- Wang, W.; Xu, G.; Song, L. Long-term stability of precipitated phases in CLAM steel during thermal aging. J. Nucl. Mater. 2019, 521, 56–62. [Google Scholar] [CrossRef]
- Wang, W.; Xu, G.; He, K. Evolution of creep behavior of CLAM steel during thermal aging at 550 °C. J. Nucl. Mater. 2018, 510, 265–269. [Google Scholar] [CrossRef]
- Giovanni, B.; Luca, L.; Tommi, V.; Erja, T. Residual stresses in HVOF-sprayed ceramic coatings. Surf. Coat. Technol. 2008, 202, 4810–4819. [Google Scholar]
- Frank, P.; Jochen, S. Thermal spraying of Zinc and Zinc-Aluminium corrosion protection. J. Therm. Spray Technol. 2012, 4, 71–75. [Google Scholar]
- Chen, Y.; Hu, L.; Qiu, C.; Wang, Z. Effects of Carbon and Boron on structure and properties of austenitic stainless steel coatings fabricated by laser remanufacturing. Steel Res. Int. 2018, 91, 800473. [Google Scholar] [CrossRef]
- Chen, Y.; Hu, L.; Qiu, C.; Huang, Q. Characterisation of multiphase ceramic coatings fabricated via laser in situ reaction technology. Surf. Eng. 2018, 34, 301–308. [Google Scholar] [CrossRef]
- Zhang, Y.; Qiu, C.; Chen, Y.; Yu, J.; Zhou, J.; Li, L.; Wang, Z. Influence of high-frequency micro-forging on microstructure and properties of 304 stainless steel fabricated by laser rapid prototyping. Steel Res. Int. 2013, 84, 870–877. [Google Scholar] [CrossRef]
- Kiilakoski, J.; Langlade, C.; Koivuluoto, H.; Vuoristo, P. Characterizing the micro-impact fatigue behavior of APS and HVOF-sprayed ceramic coatings. Surf. Coat. Technol. 2019, 371, 245–254. [Google Scholar] [CrossRef]
- Srivastava, M.; Balaraju, J.N.; Ravishankar, B.; Rajam, K.S. Improvement in the properties of nickel by nano-Cr2O3 incorporation. Surf. Coat. Technol. 2010, 205, 66–70. [Google Scholar] [CrossRef]
- Enríquez, E.; Fuertes, V.; Cabrera, M.J.; Seores, J.; Muñoz, D.; Fernándeza, J.F. Absence of surface flaking in hierarchical glass-ceramic coating: High impact resistant ceramic tiles. J. Eur. Ceram. Soc. 2019, 39, 4450–4456. [Google Scholar] [CrossRef]
- Eriko, Y.-I.; Shunichi, N.; Minooru, T. Corrosion behavior of heat-treated Fe-Al coated in lead-bismuth eutectic under loading. Prog. Nucl. Energ. 2011, 53, 1066–1072. [Google Scholar]
- Chen, Y.; Liu, T.; Chen, C.; Guo, W.; Sun, R.; Lv, S.; Saito, M.; Tsukimoto, S.; Wang, Z. Synthesis and characterization of CeO2 Nano-rods. Ceram. Int. 2013, 39, 6607–6610. [Google Scholar] [CrossRef]
- Chen, Y.; Lv, S.; Chen, C.; Qiu, C.; Fan, X.; Wang, Z. Controllable Synthesis of Ceria Nanoparticles with Uniform Reactive {100} Exposure Planes. J. Phys. Chem. C 2014, 118, 4437–4443. [Google Scholar] [CrossRef]
- Hu, P.; Chen, Y.; Sun, R.; Chen, Y.; Yin, Y.; Wang, Z. Synthesis, characterization and frictional wear behavior of ceria hybrid architectures with {111} exposure planes. Appl. Surf. Sci. 2017, 401, 100–105. [Google Scholar] [CrossRef]
- Lei, Y.-C.; Guo, X.-K.; Chang, H.-X.; Li, T.-Q.; Zhu, Q.; Chen, G.; Xiao, L.-R. Cavitation erosion behavior of CLAM steel weld joint in liquid lead-bismuth eutectic alloy. J. Iron Steel Res. Int. 2017, 24, 935–942. [Google Scholar] [CrossRef]
- Roy, M.; Martinelli, L.; Ginestar, K.; Favergeon, J.; Moulin, G. Dissolution and oxidation behaviour of various austenitic steels and Ni rich alloys in lead-bismuth eutectic at 520 °C. J. Nucl. Mater. 2016, 468, 153–163. [Google Scholar] [CrossRef]
- Schroer, C.; Wedemeyer, O.; Novotny, J.; Skrypnik, A.; Konys, J. Selective leaching of nickel and chromium from type 316 austenitic steel in oxygen-containing lead-bismuth eutectic (LBE). Corros. Sci. 2014, 84, 113–124. [Google Scholar] [CrossRef]
- Chen, G.; Ju, N.; Lei, Y.; Wang, D.; Li, T. Corrosion behavior of base metal and weld bead of CLAM steel in flowing Pb–Bi at 550 °C. Prog. Nucl. Energy 2020, 118, 103074. [Google Scholar] [CrossRef]
- Chen, G.; Lei, Y.; Zhu, Q.; Ju, N.; Wang, D. Corrosion behavior of CLAM steel weld bead in flowing Pb–Bi at 550 °C. J. Nucl. Mater. 2019, 515, 187–198. [Google Scholar] [CrossRef]
Sample | Point | C | O | Cr | Fe | Pb | Bi |
---|---|---|---|---|---|---|---|
CLAM steel after LBE corrosion at 723 K | 0 | 13.90 | 2.76 | 4.85 | 56.34 | 8.05 | 14.10 |
1 | 15.25 | 1.86 | 9.25 | 64.20 | 4.21 | 5.23 | |
2 | 14.84 | 2.00 | 7.45 | 70.20 | 2.47 | 3.03 | |
3 | 17.00 | 1.97 | 6.90 | 73.19 | 0.94 | 0 | |
4 | 15.69 | 1.76 | 8.22 | 74.21 | 0.12 | 0 | |
5 | 16.32 | 1.34 | 9.12 | 73.22 | 0 | 0 |
Sample | Point | C | O | Cr | Fe | Pb | Bi |
---|---|---|---|---|---|---|---|
CLAM steel after LBE corrosion at 823 K | 1 | 8.84 | 2.41 | 2.96 | 77.33 | 3.77 | 4.69 |
2 | 8.60 | 2.28 | 3.49 | 81.29 | 2.65 | 1.69 | |
3 | 9.24 | 7.73 | 0.17 | 80.98 | 1.85 | 0.03 | |
4 | 9.47 | 8.16 | 0.57 | 81.39 | 0.41 | 0 | |
5 | 9.12 | 0 | 7.81 | 82.79 | 0.28 | 0 | |
6 | 14.64 | 0 | 9.60 | 75.43 | 0 | 0 | |
7 | 15.25 | 0 | 9.25 | 73.38 | 0 | 0 |
Point | C | O | Al | Cr | Fe | V |
---|---|---|---|---|---|---|
1 | 3.24 | 3.00 | 43.60 | - | 4.73 | 1.59 |
2 | - | 7.09 | 51.72 | 1.87 | 1.65 | - |
3 | 3.47 | 6.28 | 36.68 | 2.95 | 15.12 | - |
© 2019 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).
Share and Cite
Chen, Y.; Hu, L.; Qiu, C.; He, B.; Zhou, L.; Zhao, J.; Li, Y. Influence of LBE Temperatures on the Microstructure and Properties of Crystalline and Amorphous Multiphase Ceramic Coatings. Coatings 2019, 9, 543. https://doi.org/10.3390/coatings9090543
Chen Y, Hu L, Qiu C, He B, Zhou L, Zhao J, Li Y. Influence of LBE Temperatures on the Microstructure and Properties of Crystalline and Amorphous Multiphase Ceramic Coatings. Coatings. 2019; 9(9):543. https://doi.org/10.3390/coatings9090543
Chicago/Turabian StyleChen, Yong, Liangbin Hu, Changjun Qiu, Bin He, Lihua Zhou, Jing Zhao, and Yanxi Li. 2019. "Influence of LBE Temperatures on the Microstructure and Properties of Crystalline and Amorphous Multiphase Ceramic Coatings" Coatings 9, no. 9: 543. https://doi.org/10.3390/coatings9090543