You are currently viewing a new version of our website. To view the old version click .
Coatings
  • Erratum
  • Open Access

12 January 2019

Erratum: Lindner, M. and Schmid, M. Thickness Measurement Methods for Physical Vapor Deposited Aluminum Coatings in Packaging Applications: A Review. Coatings 2017, 7, 9

and
1
Fraunhofer-Institute for Process Engineering and Packaging IVV, Giggenhauser Strasse 35, Freising 85354, Germany
2
Chair for Food Packaging Technology, Technische Universität München, Weihenstephaner Steig 22, Freising 85354, Germany
*
Author to whom correspondence should be addressed.
Present Address: Faculty of Life Sciences, Albstadt-Sigmaringen University, Anton-Günther-Str. 51, 72488 Sigmaringen, Germany
This article belongs to the Special Issue Advances in Coatings Characterization
The authors wish to make the following change to their published paper [1]. The following sentence on page 18
“The absorption coefficient (α) in turn is linked to the frequency (ω), particle concentration (c) and extinction coefficient (K), as illustrated in Equation (27) [79].”
is replaced by
“The absorption coefficient (α) in turn is linked to the frequency (ω), speed of light (c), and extinction coefficient (K), as illustrated in Equation (27) [79].”
The manuscript will be updated and the original will remain available. A link to this Erratum will be added.

Reference

  1. Lindner, M.; Schmid, M. Thickness Measurement Methods for Physical Vapor Deposited Aluminum Coatings in Packaging Applications: A Review. Coatings 2017, 7, 9. [Google Scholar] [CrossRef]

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.