Next Article in Journal
Research Progress on Environmental Corrosion Resistance of Thermal Barrier Coatings: A Review
Next Article in Special Issue
HfO2/Al2O3 Multilayer on Parabolic Cylinder Substrate to Monochromatize and Collimate Divergent X-Ray Beam
Previous Article in Journal
High-Speed Removal Process for Organic Polymers by Non-Thermal Atmospheric-Pressure Spark Discharge at Room Temperature and Its Mechanism
Previous Article in Special Issue
Thick Columnar-Structured Thermal Barrier Coatings Using the Suspension Plasma Spray Process
 
 
Article
Peer-Review Record

Periodically Sinusoidal Magnetic Stray Field and Improved Film Quality of CoMnP Micro-Magnet Arrays for Magnetic Encoders by Electrodeposition with the Assistance of Ultrasound

Coatings 2024, 14(10), 1340; https://doi.org/10.3390/coatings14101340
by Geng-Hua Xu 1, Jung-Yen Chang 1, Hsiang-Chun Hsueh 2 and Chiao-Chi Lin 1,*
Reviewer 1:
Reviewer 2:
Reviewer 3: Anonymous
Coatings 2024, 14(10), 1340; https://doi.org/10.3390/coatings14101340
Submission received: 20 September 2024 / Revised: 12 October 2024 / Accepted: 18 October 2024 / Published: 21 October 2024
(This article belongs to the Special Issue Functional Coatings and Surface Science for Precision Engineering)

Round 1

Reviewer 1 Report

Comments and Suggestions for Authors

Please see attached file.

Comments for author File: Comments.pdf

Comments on the Quality of English Language

Improve the structure.

Author Response

Please see the attachment.

Author Response File: Author Response.pdf

Reviewer 2 Report

Comments and Suggestions for Authors

1.introduction should be improved by  other results from references. Description of technology should be removed from introduction and  write as a special part.

2Fig.6 is to dark, it is not possible to read it

3. Unit of Oe is is not used at present

4.Samples were carefully  produced but in conclusion  it should be write,which sample has better parameters  and their practical application

 

 

 

Author Response

Please see the attachment.

Author Response File: Author Response.pdf

Reviewer 3 Report

Comments and Suggestions for Authors

Dear authors


I have some questions and comments about the article.


My questions:

1.      The abstract should demonstrate the uniqueness of the research conducted.

2.      What are the criteria for whether something is a triangle, sine-triangle, or rectangular wave, as we observe in Figures 4 and 5?

3.      Why do we observe sine, sine to triangle, triangle and rectangle shapes in 176 um (T) samples, while in 78 um (F) samples there is no such transition, only sine and then rectangle?

4.      How does current density affect the change of crystal structure from HCP/FCC to HCP?

5.      Can the resulting stress or grain size be determined?

6.      Conclusions are more a description of the results than a scientific summary of the results obtained

7.      In Figure 8 we can observe the change of the magnetic loops, which results in the widening of the OP loop with the current density?

8.      Is it possible to calculate the value of magnetic anisotropy from the obtained loops?

9.      Do the loops suggest the formation of perpendicular anisotropy in the obtained layers or is it related to the anisotropy of the obtained shape of the structures?

10.  The presentation of the results leaves much to be desired

 

11.  The references do not include references to the latest literature, we only have 3 publications from 2023 and none from 2024.

Author Response

Please see the attachment.

Author Response File: Author Response.pdf

Round 2

Reviewer 3 Report

Comments and Suggestions for Authors

Thanks to the authors for their corrections and comments. The article is now coherent and easy to read and understand. Good job :)

Back to TopTop