Next Article in Journal
Effect of Fans’ Placement on the Indoor Thermal Environment of Typical Tunnel-Ventilated Multi-Floor Pig Buildings Using Numerical Simulation
Previous Article in Journal
Experimental Study on the Droplet Size and Charge-to-Mass Ratio of an Air-Assisted Electrostatic Nozzle
 
 
Article
Peer-Review Record

The Design and Test of the Chassis of a Triangular Crawler-Type Ratooning Rice Harvester

Agriculture 2022, 12(6), 890; https://doi.org/10.3390/agriculture12060890
by Weijian Liu 1,2, Xiwen Luo 1,2, Shan Zeng 1,2,*, Li Zeng 1,2 and Zhiqiang Wen 1,2
Reviewer 1:
Reviewer 2:
Agriculture 2022, 12(6), 890; https://doi.org/10.3390/agriculture12060890
Submission received: 5 May 2022 / Revised: 15 June 2022 / Accepted: 15 June 2022 / Published: 20 June 2022
(This article belongs to the Section Agricultural Technology)

Round 1

Reviewer 1 Report

All comments have inserted in the manuscript.

Comments for author File: Comments.pdf

Author Response

Thank you. I have modified the marks of reviewers in the manuscript

Reviewer 2 Report

Please review the article in writing.

Author Response

Thank you, I have modified the manuscript.

Reviewer 3 Report

This work is about the design of a triangular rice combine harvester. In the work, the Authors described the construction and the driving principle of a triangular tracked chassis. The rationality of the project was confirmed by the simulation method as well as by the field tests. The results were compared with those obtained for a conventional combine harvester.

Author Response

谢谢您的意见。

Back to TopTop