Kim, N.;                     Bhalerao, I.;                     Han, D.;                     Yang, C.;                     Lee, H.    
        Improving Surface Roughness of Additively Manufactured Parts Using a Photopolymerization Model and Multi-Objective Particle Swarm Optimization. Appl. Sci. 2019, 9, 151.
    https://doi.org/10.3390/app9010151
    AMA Style
    
                                Kim N,                                 Bhalerao I,                                 Han D,                                 Yang C,                                 Lee H.        
                Improving Surface Roughness of Additively Manufactured Parts Using a Photopolymerization Model and Multi-Objective Particle Swarm Optimization. Applied Sciences. 2019; 9(1):151.
        https://doi.org/10.3390/app9010151
    
    Chicago/Turabian Style
    
                                Kim, Namjung,                                 Ishan Bhalerao,                                 Daehoon Han,                                 Chen Yang,                                 and Howon Lee.        
                2019. "Improving Surface Roughness of Additively Manufactured Parts Using a Photopolymerization Model and Multi-Objective Particle Swarm Optimization" Applied Sciences 9, no. 1: 151.
        https://doi.org/10.3390/app9010151
    
    APA Style
    
                                Kim, N.,                                 Bhalerao, I.,                                 Han, D.,                                 Yang, C.,                                 & Lee, H.        
        
        (2019). Improving Surface Roughness of Additively Manufactured Parts Using a Photopolymerization Model and Multi-Objective Particle Swarm Optimization. Applied Sciences, 9(1), 151.
        https://doi.org/10.3390/app9010151